Mgcamd Client soll an Oscam Server, klappt nicht

[global]
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 5
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0
resolvegethostbyname = 0
#LogFile = /etc/tuxbox/config/log/oscam.log

[monitor]
port = 988
nocrypt =
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 0

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ich
pmt_mode = 0



[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
httphideidleclients = 0
httpreadonly = 0

[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000

[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

[account]
user = dd
pwd = bbb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = aa
pwd = bbb
caid = 098C
uniq = 3
au = 1
group = 1
cccmaxhops = 0
cccreshare = 0

[account]
user = bb
pwd = bbb
au = 1
group = 1

[account]
user = cc
pwd = bbb
group = 1

# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 00 }

# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
# + tps SID, which pmt pid contains au pid
U: { 01 }

# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
# 32 cccamd netclient, card list saved as /tmp/cccamd.info
# (ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }

# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 00

# network ecm timeout in seconds
K: { 05 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 newcamd, camd3, radegast, cccamd, gbox
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } root

# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80

# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 03 } 000.000.000.000 514 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 00 }

# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-******
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 12 stapi/octagon
B: { 12 }


# map all 180x nagra caids to 1801
# default is 01
#F: { 00 }

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 15040
CWS = xxxx.dyndns.tv 15040 cc bbb 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

[global]
logfile = /dev/tty
nice = -1
waitforcards = 1
preferlocalcards = 1

[newcamd]
port = 15040@098C:000000
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 15000
nodeid = 34E18CA0104314C8
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = ich
boxtype = dreambox

[monitor]
port = 988
aulow = 120
monlevel = 4
hideclient_to = 0

[webif]
httpport = 15001
httprefresh = 7
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
aulow = 120
hideclient_to = 0