Kathi mit mgCamd auf newcs funktioniert nicht ?!

<newCSconfig>
    <readers name="Phoenix">
        <device>
            <name>Smargo</name>
            <type>smartreader+</type>
            <mhz>600</mhz>
            <node>com3</node>
            <parity>odd</parity>
            <reset>normal</reset>
            <export>Yes</export>
            <enabled>Yes</enabled>
            <blocksa>No</blocksa>
            <blockua>No</blockua>
            <blockga>No</blockga>
            
            
            <irdeto-camkey>0000000000000000</irdeto-camkey>
            <irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
            <crypto-special>No</crypto-special>
            <ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
            <ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
            <PTShandshake>No</PTShandshake>
            <carddetect>yes</carddetect>
            <newcamd_port>25200</newcamd_port>
            <autosid>Yes</autosid>
            <Seca-PPV>no</Seca-PPV>
            <pincode>0000</pincode>
            <priority>fifo</priority>
        </device>
    </readers>
    <cache>
            <emm>20</emm>
            <ecm>-1</ecm>
    </cache>
 <httpd>
        <server>
         <port>19000</port> 
         <enabled>yes</enabled> 
        </server>
  <user>
    <name>newcs</name> 
    <password>newcs</password> 
    <accesslevel>admin</accesslevel> 
  </user>
  </httpd>    
    <debug>
            <password>newcs</password>    
            <level>normal</level>
            <type>init</type>
            <output>console,tcp</output>
            <console_options>normal,init</console_options>
            <tcp_port>1001</tcp_port>
            <tcp_options>normal,init</tcp_options>
    </debug>
    <newcamdserver>
            <enabled>Yes</enabled>
            <name>newcs</name>
            <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
        <user>
                        <name>user</name>
                        <password>1234</password>
                        <hostname></hostname>
                        <port></port>
                        <au>yes</au>
                        <spider>no</spider>
                        <sidoverride>no</sidoverride>
                        <rate>0</rate>
                </user>
       </newcamdserver>
</newCSconfig>

CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 25200
CWS = 192.168.0.1 25200 user 1234 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan newcs

# ./mgcamd
tuxbox mgcamd v1.33 by mixvt (compiled May 31 2009 19:41:08)
[mg] Net:1:7:2:2s Show ecm:1, emm:1 Up:1 Au:1 Dir:0 Osd:neutrino:8080:3 Cache:7 
Log:2:127.0.0.1:28007 Reread:0
[mg] Ecm cache time: 15
Box type: ufs910
Conax.Key error 2: No such file or directory
# Keys readed
Conax.Key error 2: No such file or directory
[config] newcamd route = user:192.168.0.1:25200 server newcs
newcamd keep alive: 300, incoming port: 25200
[mgcam] emm thread started
[mgcamd] tps update started.
/data/keys/tps.bin error 2: No such file or directory
[newcamd] Connecting to 192.168.0.1:25200...
[newcamd] Login to 192.168.0.1:25200 as user accepted (1ms)
[newcamd] Card data from 192.168.0.1:25200 (3ms):
        Userid 2 caid 1702 providers 4
        Idents: 000000 000001 000002 000003

[newcamd] Ping to 192.168.0.1:25200...
[newcamd] Pong from 192.168.0.1:25200 (2ms)

# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 01 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
G: { 01 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 02 }

# newcamd dead routes connect retry, sec
Q: { 120 }

# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 02 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 01 } root newcs

# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 8080

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 02 } 127.0.0.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 12 ufs910
B: { 12 }

# urls for aes keys update, any number or urls allowed,
# url data must contain key in format 0500:007C00:0000000000:00:key1:keyl
# W: { http://some.host.com/keys.php }