Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

kann keine emm loggen

AW: kann keine emm loggen

Nein.
EMMs werden etwa jede Stunde gesendet, wenn gerade keine Aktivierung läuft. Bei cccam Clients sind das weniger. Da hilft dann evtl. ein reboot des Clients.
Poste bitte deine EMMs, die du bis jetzt bekommen hast im Format 827034, 827025 also nur die ersten drei Bytes (6 Stellen).
 
AW: kann keine emm loggen

hier alle bis jetzt

emm
8270254
8270254
8270254
8270394
8270254
8270254
8270254
8270254
8270394
8270254
8270254
8270254
8270394
8270254
8270254
8270254
8270254
8270394
8270254


soll ich neu starten?
 
AW: kann keine emm loggen

Ließ dir mal hier den ersten Post durch und dann melde dich mal in dem Thread mit einem emm. Da wird dir sicherlich geholfen!
 
AW: kann keine emm loggen

karte akiviert... erstmal soweit alles erledigt

gruß kiss



Update 5 min später...

es geht 2 minuten und dann hängt es und geht garnicht mehr.... :emoticon-0179-headb
 
Zuletzt bearbeitet:
v14 wird nicht hell

hallo,

ich bräuchte bitte nochmal hilfe:

meine v14 ist aktivert und funzt, es steht im webinf CARDOK - 30 entilements
aber wird nicht hell

startlog
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jul 17 10:50:39 2015
-------------------------------------------------------------------------------
2015/07/17 10:50:39 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-newnigma2-linux-gnu)
2015/07/17 10:50:39 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 677
2015/07/17 10:50:39 0 s services reloaded: 0 services freed, 11 services loaded, rejected 0
2015/07/17 10:50:39 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/07/17 10:50:39 0 s signal handling initialized
2015/07/17 10:50:39 0 s 422 service-id's loaded in 18ms
2015/07/17 10:50:39 0 s 843 tier-id's loaded
2015/07/17 10:50:39 0 s 56 provid's loaded
2015/07/17 10:50:39 0 s 689 entries read from oscam.whitelist
2015/07/17 10:50:39 0 s newcamd: initialized (fd=6, port=12001)
2015/07/17 10:50:39 0 s cccam: initialized (fd=7, port=12000)
2015/07/17 10:50:39 0 s hdplus [internal] creating thread for device /dev/sci0
2015/07/17 10:50:39 0 s sky [internal] creating thread for device /dev/sci1
2015/07/17 10:50:39 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/07/17 10:50:39 0 s anti cascading disabled
2015/07/17 10:50:39 D09938 r sky [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=6.00 MHz
2015/07/17 10:50:39 D07BA8 r hdplus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.40 MHz
2015/07/17 10:50:39 778004F0 c plain dvbapi-client granted (anonymous, au=off)
2015/07/17 10:50:39 778004F0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/07/17 10:50:39 D0BF50 h webif: decompressed 69662 bytes back into 195704 bytes
2015/07/17 10:50:39 D0BF50 h HTTP Server running. ip=0.0.0.0 port=16002
2015/07/17 10:50:53 778004F0 c [DVBAPI] Receiver sends PMT command 3 for channel 283D
2015/07/17 10:50:53 778004F0 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
2015/07/17 10:50:53 778004F0 c Found 0 ECMpids and 10 STREAMpids in PMT
2015/07/17 10:50:53 778004F0 c [DVBAPI] Receiver wants to demux srvid 283D on adapter 0000 camask 0008 index 0003 pmtpid 13EC
2015/07/17 10:50:53 778004F0 c New program number: 283D (FFFE:283D unknown) [pmt_list_management 3]
2015/07/17 10:51:35 D07BA8 r hdplus [internal] card detected
2015/07/17 10:51:36 D07BA8 r hdplus [internal] ATR: 3F FF XX XX XX
2015/07/17 10:51:36 D07BA8 r hdplus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/07/17 10:51:36 D07BA8 r hdplus [internal] TEST tempo mhz check = 500 mhz
2015/07/17 10:51:36 D07BA8 r hdplus [internal] Calculated work ETU is 5.93 us reader mhz = 540
2015/07/17 10:51:36 D07BA8 r hdplus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2015/07/17 10:51:36 D07BA8 r hdplus [internal] Card responded ok for ifsd request of 160
2015/07/17 10:51:37 D07BA8 r hdplus [internal] detect native nagra card
2015/07/17 10:51:39 D07BA8 r hdplus [internal] found card system nagra
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] ROM: D N A S P 1 8 0
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] REV: M e r 0 0 0
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] SER: ############
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] CAID: 1843
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] Prv.ID: 00 00 00 00
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] IRD ID: ############
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] active to: 2015/09/02 12:59
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] -----------------------------------------
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] |id |tier |valid from |valid to |
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] +----+--------+------------+------------+
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] |8011|0066 |2011/02/02 |2012/02/04 |
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] |8011|0BEA |2015/01/12 |2016/02/17 |
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] -----------------------------------------
2015/07/17 10:51:39 D07BA8 r hdplus [nagra] ready for requests
2015/07/17 10:52:00 778004F0 c [DVBAPI] Receiver sends PMT command 3 for channel EF10
2015/07/17 10:52:00 778004F0 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2015/07/17 10:52:00 778004F0 c [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2015/07/17 10:52:00 778004F0 c [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2015/07/17 10:52:00 778004F0 c [ADD PID 2] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2015/07/17 10:52:00 778004F0 c [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2015/07/17 10:52:00 778004F0 c [ADD PID 4] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2015/07/17 10:52:00 778004F0 c [ADD PID 5] CAID: 186A ECM_PID: 1FCC PROVID: 000000
2015/07/17 10:52:00 778004F0 c Found 6 ECMpids and 7 STREAMpids in PMT
2015/07/17 10:52:00 778004F0 c [DVBAPI] Receiver wants to demux srvid EF10 on adapter 0000 camask 0008 index 0003 pmtpid 0060
2015/07/17 10:52:00 778004F0 c New program number: EF10 (RTL HD) [pmt_list_management 3]
2015/07/17 10:52:00 778004F0 c [DVBAPI] Demuxer #0 trying to descramble PID #1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
2015/07/17 10:52:01 778004F0 c anonymous (1843&000000/0000/EF10/89:BD860A7CE2BF493EB45A97180059648E): found (399 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:06 778004F0 c anonymous (1843&000000/0000/EF10/89:519C27ABA5960A35A5A1446EE3C77715): found (379 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:16 778004F0 c anonymous (1843&000000/0000/EF10/89:5B5F2422B4BACB7AD0B4F73ACB085EAA): found (379 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:26 778004F0 c anonymous (1843&000000/0000/EF10/89:B8848D3EA1B5F7E8F711EDC1A34749B3): found (378 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:36 778004F0 c anonymous (1843&000000/0000/EF10/89:654107565ED3EB06114105BDA58BB1B7): found (380 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:46 778004F0 c anonymous (1843&000000/0000/EF10/89:EC9FF1C0FC8BCB1DF19504C4BD8BF782): found (375 ms) by hdplus - RTL HD (cwc LEARN)
2015/07/17 10:52:56 778004F0 c anonymous (1843&000000/0000/EF10/89:FF00468FB9519D19EB9AA1C44EDDE5BA): found (379 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:06 778004F0 c anonymous (1843&000000/0000/EF10/89:6ED7EE5496139CE557F6AFF934DAA2E9): found (379 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:16 778004F0 c anonymous (1843&000000/0000/EF10/89:A137781F08FD54D9181219361089A0E0): found (382 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:26 778004F0 c anonymous (1843&000000/0000/EF10/89:050ED294959E5BBB895F6AA335FD2ECD): found (377 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:36 778004F0 c anonymous (1843&000000/0000/EF10/89:A73B1D732DD35F804D1047D23FFDC64E): found (377 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:46 778004F0 c anonymous (1843&000000/0000/EF10/89:2591635C6748342B589E1171CEB5DFCB): found (376 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:53:56 778004F0 c anonymous (1843&000000/0000/EF10/89:764776F0517A6D1D5E5955E3BC19083C): found (382 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:06 778004F0 c anonymous (1843&000000/0000/EF10/89:5F4CA438E05CC91A398EBDF89B65E685): found (376 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:16 778004F0 c anonymous (1843&000000/0000/EF10/89:9FED3D12BE8D04DEA63F630830BAC27E): found (379 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:26 778004F0 c anonymous (1843&000000/0000/EF10/8907BC9EC3F2C59FD487432716713697D): found (381 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:36 778004F0 c anonymous (1843&000000/0000/EF10/8935C7A52DE205D8245206B303CB3B35B): found (382 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:46 778004F0 c anonymous (1843&000000/0000/EF10/89:A271956074249DB8377FCA8881D2BC69): found (381 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:54:56 778004F0 c anonymous (1843&000000/0000/EF10/89:B9F131514BB605A8A7D4F60FD5EA664A): found (381 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:55:06 778004F0 c anonymous (1843&000000/0000/EF10/89:0BD57C8F6DBEDEB8448054BE5E5FC889): found (380 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:55:16 778004F0 c anonymous (1843&000000/0000/EF10/89:21FB93C5FA27185D9B7F60B7D70BC319): found (380 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:55:16 D09938 r sky [internal] card detected
2015/07/17 10:55:17 D09938 r sky [internal] ATR: 3F XX XX XX
2015/07/17 10:55:17 D09938 r sky [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/07/17 10:55:17 D09938 r sky [internal] TEST tempo mhz check = 500 mhz
2015/07/17 10:55:17 D09938 r sky [internal] Calculated work ETU is 5.17 us reader mhz = 450
2015/07/17 10:55:17 D09938 r sky [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/07/17 10:55:18 D09938 r sky [internal] Card type: P1TV
2015/07/17 10:55:18 D09938 r sky [internal] Rom version: 20AA
2015/07/17 10:55:18 D09938 r sky [internal] parental lock setting: FF FF FF FF
2015/07/17 10:55:18 D09938 r sky [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/17 10:55:18 D09938 r sky [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/07/17 10:55:18 D09938 r sky [internal] ready for requests
2015/07/17 10:55:18 D09938 r sky [internal] found card system videoguard2
2015/07/17 10:55:18 D09938 r sky [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2015/07/17 10:55:18 D09938 r sky [videoguard2] card detected
2015/07/17 10:55:18 D09938 r sky [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0046, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0056, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0057, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0058, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0065, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0066, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0067, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0068, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 0069, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 006a, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 006b, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 006c, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 006d, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:18 D09938 r sky [videoguard2] tier: 006e, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 006f, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 007b, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 007d, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 0081, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 008e, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00c0, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00c7, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00c8, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00c9, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00ca, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00e4, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00e5, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00f0, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00f3, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00fa, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:19 D09938 r sky [videoguard2] tier: 00ff, expiry date: 2015/09/04-01:00:00
2015/07/17 10:55:26 778004F0 c anonymous (1843&000000/0000/EF10/89:B1464B9DFECD5FCF9C1E0146172AF189): found (383 ms) by hdplus - RTL HD (cwc OK)
2015/07/17 10:55:36 778004F0 c [DVBAPI] Receiver sends PMT command 3 for channel 0083
2015/07/17 10:55:36 778004F0 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2015/07/17 10:55:36 778004F0 c [ADD PID 0] CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2015/07/17 10:55:36 778004F0 c [ADD PID 1] CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2015/07/17 10:55:36 778004F0 c [ADD PID 2] CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2015/07/17 10:55:36 778004F0 c [ADD PID 3] CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2015/07/17 10:55:36 778004F0 c Found 4 ECMpids and 5 STREAMpids in PMT
2015/07/17 10:55:36 778004F0 c [DVBAPI] Receiver wants to demux srvid 0083 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2015/07/17 10:55:36 778004F0 c New program number: 0083 (Sky Cinema HD) [pmt_list_management 3]
2015/07/17 10:55:36 778004F0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/17 10:55:36 778004F0 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1FB6 PMTPID 0064 (NO MATCHING READER)
2015/07/17 10:55:36 778004F0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!


jemand `ne idee?
 
AW: v14 wird nicht hell

Hast du HD+ abboniert?
Funktioniert Sky?

Wie ist der Payload?
 
AW: v14 wird nicht hell

hast du keine sky sender ???
 
AW: v14 wird nicht hell

wie wäre es auch mal mit allen kompletten confgis?
 
AW: v14 wird nicht hell

gestern noch emm geloggt und heute user anonymous ?
wohl an den configs rumgespielt ?
 
AW: v14 wird nicht hell

config kommen gleich.. und auch payload..

ich hab sender.. gestern wurden sie auch hell, aber immer nur für ne minute und dann nix mehr
wenn ich oscam neu starte, dann wurden sie wieder für ne minute hell
 
AW: v14 wird nicht hell

die configs können nicht stimmen, dann mit anonymous hättest du kei au machen können
also posten
 
AW: v14 wird nicht hell

config

[global]
logfile = /tmp/oscam.log
nice = 0
maxlogsize = 512
waitforcards = 0
preferlocalcards = 1
readerrestartseconds = 30
dropdups = 1
failbantime = 60
failbancount = 2

[cache]
max_time = 8
cwcycle_check_enable = 1
cwcycle_check_caid = 1702,1722,1830,1843,1833,1834,0B00,0604,0500,0100,09C4,09C7,098C
cwcycle_maxlist = 1000
cwcycle_usecwcfromce = 1

[newcamd]
port = 12001
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = 12000
nodeid =
version = 2.2.1
reshare = 1
ignorereshare = 1
forward_origin_card = 1
stealth = 1

[dvbapi]
enabled = 1
user = skyde
boxtype = dreambox
au = 1

[webif]
httpport = 16002
httpuser = xxx
httppwd = xxx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


server
[reader]
label = hdplus
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
services = hdplus
caid = 1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 540
cardmhz = 2700
ident = 1843:003411,000000
group = 1
emmcache = 1,1,2,0
lb_weight = 300

[reader]
label = sky
protocol = internal
device = /dev/sci1
key = 0102030405060708091011121314
caid = 098C,1702,1833
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
ident = 1702:000000;1833:000000
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

[reader]
label = emulator
enable = 0
protocol = emu
device = emulator
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,007301,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000


user
[account]
user = Skyde
caid = 1702,1722,1833,1834,1830,1843,0500,0100,0B00,0B01,0B02,0D03,0D95,0D05,0D09,0D96,0D70,0D0F,09CD,09C4,098C,09C7,0604,0648,1810
uniq = 3
group = 1
cccmaxhops = 3
au = 1

dvbapi
[dvbapi]
P: 1843
P: 098C
I:0
 
AW: v14 wird nicht hell

wurde dir schon im letzten thread gesagt, dass user account und user dvbapi nicht gleich sind
dazu auch caid ident usw beim reader, cache ???, nicht entfernt und geändert, alles nicht gemacht,
sieh mal besser im alten thread nach und mach nicht immer neuen auf, sonst muss man alles doppelt machen
 
AW: v14 wird nicht hell

Die Configs sind ja völlig vermurkst, ohne Worte.

-supraracer
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…