Hallo Freunde,
ich habe einen Unibox HD01plus hier und wollte die V14 im internen reader laufen lassen. Die Karte ist aktiviert und nicht gepairt. Aber ich bekomme immer ein Error auf dem reader.
Hier meine Konfig:
und das log:
ich habe einen Unibox HD01plus hier und wollte die V14 im internen reader laufen lassen. Die Karte ist aktiviert und nicht gepairt. Aber ich bekomme immer ein Error auf dem reader.
Hier meine Konfig:
[reader]label = V14
protocol = internal
device = /dev/sci0
autospeed = 1
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
saveemm-u = 1
ndsversion = 2
protocol = internal
device = /dev/sci0
autospeed = 1
cardmhz = 2700
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
saveemm-u = 1
ndsversion = 2
[global]logfile = stdout
logfile = /tmp/vizcam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 160
bindwait = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 2
saveinithistory = 1
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
logfile = /tmp/vizcam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 160
bindwait = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 2
saveinithistory = 1
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1
und das log:
- 2014/08/17 13:45:19 528858 r V14 [internal] card detected
- 2014/08/17 13:45:19 528858 r V14 [internal] ATR: 78 F0 58 21 81 00
- 2014/08/17 13:45:19 528858 r V14 [internal] ERROR: Could not read reader->convention
- 2014/08/17 13:45:19 528858 r V14 [internal] Error activating card.
- 2014/08/17 13:45:20 528858 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2014/08/17 13:45:20 528858 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2014/08/17 13:45:20 528858 r V14 [internal] TEST tempo mhz check = 500 mhz
- 2014/08/17 13:45:20 528858 r V14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
- 2014/08/17 13:45:22 528858 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
- 2014/08/17 13:45:23 528858 r V14 [internal] card system not supported
- 2014/08/17 13:45:23 528858 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
- 2014/08/17 13:45:23 528858 r V14 [internal] ATR: 78 F0 58 21 81 00
- 2014/08/17 13:45:23 528858 r V14 [internal] ERROR: Could not read reader->convention
- 2014/08/17 13:45:23 528858 r V14 [internal] Error activating card.
- 2014/08/17 13:45:24 528858 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
- 2014/08/17 13:45:24 528858 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
- 2014/08/17 13:45:24 528858 r V14 [internal] TEST tempo mhz check = 500 mhz
- 2014/08/17 13:45:24 528858 r V14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
- 2014/08/17 13:45:26 528858 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
- 2014/08/17 13:45:27 528858 r V14 [internal] card system not supported
- 2014/08/17 13:45:27 528858 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
- 2014/08/17 13:45:27 528858 r V14 [internal] card initializing error
- 2014/08/17 13:45:28 0 s init for all local cards done
Zuletzt bearbeitet von einem Moderator: