Hilfe bei freien Programmen über KD

AW: Hilfe bei freien Programmen über KD

Zuerst: nimm bitte RSA und BoxKey aus dem Post, mache xxxx dafür rein.
Spoiler erstellen: unter dem Fenster rechts auf "Erweitert" -
den Text, der in die Spoiler soll markieren -
dann oben über dem Fenster auf "Spoiler" klicken.
Das kann raus:
blockemm-unknown = 1
ecmwhitelist = 89

/dev/sci0 ist der obere Schacht bei der 800se, der einzige bei der 800hd.
Sosnt sieht es erstmal gut aus.
 
AW: Hilfe bei freien Programmen über KD

Morgen,
das habe ich nun gelöscht. Aber die Box greift immer noch nicht auf die Karte drauf zu.

Die Keys wurde ja schon durch XXX ersetzt.

[global]
nice = -1
ClientTimeout = 10
logfile = /tmp/OScam.log
WaitForCards = 1
CacheDelay = 120
PreferLocalCards = 1
FallbackTimeout = 2
Sleep = 0
clienttimeout = 5
serverip = 127.0.0.1
maxlogsize = 2480
readerautoloadbalance = 1


newcamd]

key = 0102030405060708091011121314

port = 24000@1834:000000



[webif]
httpport = 12233
httprefresh = 10
httpallowed = 192.168.178.1-192.168.178.253
lb_mode = 1


[reader]
label = kdhome
protocol = internal
device = /dev/sci0
services = kddigifree
caid = 1834
rsakey = XXX

boxkey = XXX
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2


[account]
user = Jens
pwd = Jens
group = 1
au = 1
caid = 1834
suppresscmd08 = 1
cccmaxhops = 0
cccreshare = 0
 
Zuletzt bearbeitet:
AW: Hilfe bei freien Programmen über KD

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Oct 24 19:51:29 2011
-------------------------------------------------------------------------------
2011/10/24 19:51:29 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #5882 (mipsel-oe-linux)
2011/10/24 19:51:29 0 s version=1.20-unstable_svn, build #5882, system=mipsel-oe-linux, nice=-1
2011/10/24 19:51:29 0 s client max. idle=120 sec, debug level=0
2011/10/24 19:51:29 0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/10/24 19:51:29 0 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2011/10/24 19:51:29 0 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2011/10/24 19:51:29 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/10/24 19:51:29 0 s signal handling initialized (type=sysv)
2011/10/24 19:51:29 0 s can't open file "/etc/tuxbox/config/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/10/24 19:51:29 0 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/10/24 19:51:29 0 s can't open file "/etc/tuxbox/config/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/10/24 19:51:29 0 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/10/24 19:51:29 0 s monitor: disabled
2011/10/24 19:51:29 0 s camd35: disabled
2011/10/24 19:51:29 0 s cs378x: disabled
2011/10/24 19:51:29 0 s newcamd: disabled
2011/10/24 19:51:29 0 s cccam: initialized (fd=6, port=12000, ip=127.0.0.1, crypted)
2011/10/24 19:51:29 0 s radegast: disabled
2011/10/24 19:51:29 0 s http thread started
2011/10/24 19:51:29 0 s reader check thread started
2011/10/24 19:51:29 547708 h HTTP Server listening on port 8586
2011/10/24 19:51:29 0 s check thread started
2011/10/24 19:51:29 0 s creating thread for device /dev/sci0
2011/10/24 19:51:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/10/24 19:51:29 0 s waiting for local card init
2011/10/24 19:51:29 548FA8 r reader d09 initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2011/10/24 19:51:30 0 d09 card detected
2011/10/24 19:51:33 548FA8 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2011/10/24 19:51:34 548FA8 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/10/24 19:51:35 548FA8 r detect irdeto tunneled nagra card
2011/10/24 19:51:35 548FA8 r no rsa key configured -> using irdeto mode
2011/10/24 19:51:35 548FA8 r detect irdeto card
2011/10/24 19:51:38 548FA8 r card system not supported
2011/10/24 19:51:38 548FA8 r Normal mode failed, reverting to Deprecated Mode
2011/10/24 19:51:40 548FA8 r ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2011/10/24 19:51:41 548FA8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/10/24 19:51:42 548FA8 r detect irdeto tunneled nagra card
2011/10/24 19:51:42 548FA8 r no rsa key configured -> using irdeto mode
2011/10/24 19:51:42 548FA8 r detect irdeto card
2011/10/24 19:51:45 548FA8 r card system not supported
2011/10/24 19:51:45 548FA8 r card initializing error
2011/10/24 19:51:46 0 s init for all local cards done
2011/10/24 19:51:46 0 s anti cascading disabled
2011/10/24 19:51:46 54C5C0 c plain dvbapi-client granted (anonymous, au=off)
2011/10/24 19:51:46 54C5C0 c dvbapi: can't open priority file /etc/tuxbox/config/oscam.dvbapi



Die D09 Karte wird doch erkannt, aber startet nicht so wie das aussieht, oder??
 
AW: Hilfe bei freien Programmen über KD

Mal ein Stück aus dem Log posten?
So kann ich nicht sagen, ob die Karte initialisiert wird.
 
AW: Hilfe bei freien Programmen über KD

Hi, bei Fehlermeldung, kenn ich zwei Ursachen, entweder kommt der reader nicht mit der Baudrate der Karte zurecht oder die Karte ist noch nicht aktiviert.

Code: 
2011/10/24 19:51:38 548FA8 r card system not supported
2011/10/24 19:51:38 548FA8 r Normal mode failed, reverting to Deprecated Mode
 
AW: Hilfe bei freien Programmen über KD

Oct 25 06:07:27 dm800se user.warn kernel: [127942.072000] VIDEO0: set blank to 1
Oct 25 06:07:27 dm800se user.warn kernel: [127942.074000] audio: decoder stop
Oct 25 06:07:27 dm800se user.warn kernel: [127942.075000] stop audio on dmx 0 pid:57b
Oct 25 06:07:27 dm800se user.warn kernel: [127942.075000] audio: xpt stop(3)
Oct 25 06:07:27 dm800se user.warn kernel: [127942.076000] no decoder left in sync handling so disable xpt_sync
Oct 25 06:07:27 dm800se user.warn kernel: [127942.076000] bcm_audio_channel_stop(3) done
Oct 25 06:07:27 dm800se user.info kernel: [127942.198000] tda: afc=0 (0 Hz)
Oct 25 06:07:27 dm800se user.warn kernel: [127942.222000] start pcr0 on dmx 0 pid:a8d index 5
Oct 25 06:07:27 dm800se user.warn kernel: [127942.223000] start audio on dmx 0 pid:a8e
Oct 25 06:07:27 dm800se user.warn kernel: [127942.224000] audio xpt start
Oct 25 06:07:27 dm800se user.warn kernel: [127942.225000] sync is off so we enable it
Oct 25 06:07:27 dm800se user.warn kernel: [127942.225000] demux-index 0 pcr0pid a8d
Oct 25 06:07:27 dm800se user.warn kernel: [127942.226000] using 5 as pcr0 pidchannel
Oct 25 06:07:27 dm800se user.warn kernel: [127942.226000] MPEG
Oct 25 06:07:27 dm800se user.warn kernel: [127942.226000] audio: streamtype set 0
Oct 25 06:07:27 dm800se user.warn kernel: [127942.227000] audio: streamtype_set: stop rave
Oct 25 06:07:27 dm800se user.warn kernel: [127942.228000] audio: streamtype_set: restart rave
Oct 25 06:07:27 dm800se user.warn kernel: [127942.229000] set mute 0 (111) 0
Oct 25 06:07:27 dm800se user.warn kernel: [127942.230000] audio: decoder start 0
Oct 25 06:07:27 dm800se user.warn kernel: [127942.233000] video delay 0 (0 ms)
Oct 25 06:07:27 dm800se user.warn kernel: [127942.234000] total video delay: 0 (0 ms)
Oct 25 06:07:27 dm800se user.warn kernel: [127942.236000] start video0 on dmx 0 pid:a8d
Oct 25 06:07:27 dm800se user.warn kernel: [127942.237000] total video delay: 0 (0 ms)
Oct 25 06:07:27 dm800se user.warn kernel: [127942.241000] VIDEO0: start decode
Oct 25 06:07:27 dm800se daemon.debug CCcam: EMM: not interested in 09C7:000000
Oct 25 06:07:23 dm800se user.warn kernel: [127942.812000] ch0: lock
Oct 25 06:07:23 dm800se user.warn kernel: [127942.812000] printk: 11 messages suppressed.
Oct 25 06:07:23 dm800se user.warn kernel: [127942.812000] RAP sampling rate info isr
Oct 25 06:07:23 dm800se user.warn kernel: [127942.911000] RAP first pts 0x191ec015c, stc 0x191ebe39e, pcr valid
Oct 25 06:07:24 dm800se user.warn kernel: [127943.105000] VIDEO0: first pts 0x191ec9a7e
Oct 25 06:07:24 dm800se user.warn kernel: [127943.255000] enable tsm0
Oct 25 06:07:24 dm800se user.info kernel: [127943.426000] tda: afc=0 (0 Hz)
Oct 25 06:07:29 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:30 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:37 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:37 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:44 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:45 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:51 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:52 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:59 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:59 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:06 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:06 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:13 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:14 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:21 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:21 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:28 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:28 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:35 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:36 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:43 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:43 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:50 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:50 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:08:57 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:08:58 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:05 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:05 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:12 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:12 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:19 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:20 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:27 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:27 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:34 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:34 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:41 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:42 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:49 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:49 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:09:56 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:09:56 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:03 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:04 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:11 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:11 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:18 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:18 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:25 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:26 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:33 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:33 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:40 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:40 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:47 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:48 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:10:55 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:10:55 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:02 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:02 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:09 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:10 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:17 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:17 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:24 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:24 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:31 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:32 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:39 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:39 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:46 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:46 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:11:53 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:11:54 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:01 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:01 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:08 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:08 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:15 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:16 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:23 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:23 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:30 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:30 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:37 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:38 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:45 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:45 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:52 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:12:52 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:12:59 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:00 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:07 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:07 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:14 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:14 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:21 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:22 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:23 dm800se auth.info login[2388]: root login on 'pts/0'
Oct 25 06:13:29 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:29 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:36 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:36 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:13:43 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:13:44 dm800se daemon.debug CCcam: drecrypt card found

Meint ihr den log?
 
AW: Hilfe bei freien Programmen über KD

Oct 25 06:05:58 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:05:59 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:06 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:06 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:13 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:13 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:20 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:21 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:28 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:28 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:35 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:35 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:37 dm800se user.warn kernel: [127892.903000] ch0: unlock
Oct 25 06:06:37 dm800se user.warn kernel: [127892.935000] ch0: lock
Oct 25 06:06:38 dm800se user.warn kernel: [127893.285000] rap watchdog flush!
Oct 25 06:06:38 dm800se user.warn kernel: [127893.285000] flush audio decode
Oct 25 06:06:38 dm800se user.warn kernel: [127893.287000] video delay 0 (0 ms)
Oct 25 06:06:38 dm800se user.warn kernel: [127893.288000] total video delay: 0 (0 ms)
Oct 25 06:06:38 dm800se user.warn kernel: [127893.330000] ch0: lock
Oct 25 06:06:38 dm800se user.warn kernel: [127893.331000] printk: 12 messages suppressed.
Oct 25 06:06:38 dm800se user.warn kernel: [127893.331000] RAP sampling rate info isr
Oct 25 06:06:38 dm800se user.warn kernel: [127893.332000] eModeChange Isr.. set source_changed_event!
Oct 25 06:06:38 dm800se user.warn kernel: [127893.365000] RAP first pts 0x90c490e0, stc 0x90c48362, pcr valid
Oct 25 06:06:38 dm800se user.warn kernel: [127893.365000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:38 dm800se user.warn kernel: [127893.370000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:38 dm800se user.warn kernel: [127893.374000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:38 dm800se user.warn kernel: [127893.378000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:38 dm800se user.warn kernel: [127893.382000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:38 dm800se user.warn kernel: [127893.386000] audio_cdb_itb_error_isr! underflow
Oct 25 06:06:42 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:43 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:50 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:50 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:06:57 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:06:57 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:04 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:05 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:11 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:12 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:17 dm800se user.warn kernel: [127932.902000] ch0: unlock
Oct 25 06:07:17 dm800se user.warn kernel: [127932.934000] ch0: lock
Oct 25 06:07:18 dm800se user.warn kernel: [127933.284000] rap watchdog flush!
Oct 25 06:07:18 dm800se user.warn kernel: [127933.284000] flush audio decode
Oct 25 06:07:18 dm800se user.warn kernel: [127933.286000] video delay 0 (0 ms)
Oct 25 06:07:18 dm800se user.warn kernel: [127933.287000] total video delay: 0 (0 ms)
Oct 25 06:07:18 dm800se user.warn kernel: [127933.333000] ch0: lock
Oct 25 06:07:18 dm800se user.warn kernel: [127933.333000] printk: 10 messages suppressed.
Oct 25 06:07:18 dm800se user.warn kernel: [127933.334000] RAP sampling rate info isr
Oct 25 06:07:18 dm800se user.warn kernel: [127933.334000] eModeChange Isr.. set source_changed_event!
Oct 25 06:07:18 dm800se user.warn kernel: [127933.362000] RAP first pts 0x90fb7f60, stc 0x90fb710a, pcr valid
Oct 25 06:07:18 dm800se user.warn kernel: [127933.365000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:18 dm800se user.warn kernel: [127933.369000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:18 dm800se user.warn kernel: [127933.373000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:18 dm800se user.warn kernel: [127933.377000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:18 dm800se user.warn kernel: [127933.381000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:18 dm800se user.warn kernel: [127933.385000] audio_cdb_itb_error_isr! underflow
Oct 25 06:07:19 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:19 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:26 dm800se daemon.debug CCcam: irdeto card found
Oct 25 06:07:27 dm800se daemon.debug CCcam: drecrypt card found
Oct 25 06:07:27 dm800se user.warn kernel: [127942.068000] stop pcr0 on dmx 0 pid:578
Oct 25 06:07:27 dm800se user.warn kernel: [127942.070000] stop video0 on dmx 0 pid:579
Oct 25 06:07:27 dm800se user.warn kernel: [127942.071000] VIDEO0: stop decode


Oct 25 06:16:34 dm800se daemon.debug CCcam: ======================================================================
Oct 25 06:16:34 dm800se daemon.debug CCcam: starting CCcam 2.1.4 compiled on Jan 30 2010@16:28:03
Oct 25 06:16:34 dm800se daemon.debug CCcam: ======================================================================
Oct 25 06:16:34 dm800se daemon.debug CCcam: online using nodeId 8340b5ce56bd824c
Oct 25 06:16:34 dm800se daemon.debug CCcam: readProviderfile: cannot open /var/etc/CCcam.providers or not found
Oct 25 06:16:34 dm800se daemon.debug CCcam: readChannelList: cannot open /var/etc/CCcam.channelinfo or not found
Oct 25 06:16:34 dm800se daemon.debug CCcam: server started on port 12000
Oct 25 06:16:35 dm800se user.err kernel: [128494.752000] 128794:752926000 SMCA: invalid ioctl: 0x00005407
Oct 25 06:16:39 dm800se daemon.debug CCcam: EMM: not interested in 09C7:000000
Oct 25 06:16:39 dm800se user.warn kernel: [128498.658000] ch0: lock
Oct 25 06:16:39 dm800se user.warn kernel: [128498.659000] printk: 6 messages suppressed.
Oct 25 06:16:39 dm800se user.warn kernel: [128498.659000] XVD pts error PTS 0xca671cdf, STC 0xca738ceb, type 0
Oct 25 06:16:39 dm800se user.warn kernel: [128498.699000] XVD pts error PTS 0xea5ced27, STC 0xca7393f2, type 0
Oct 25 06:16:40 dm800se user.warn kernel: [128499.009000] rap watchdog flush!
Oct 25 06:16:40 dm800se user.warn kernel: [128499.009000] flush audio decode
Oct 25 06:16:40 dm800se user.warn kernel: [128499.011000] video delay 0 (0 ms)
Oct 25 06:16:40 dm800se user.warn kernel: [128499.012000] total video delay: 0 (0 ms)
Oct 25 06:16:40 dm800se user.warn kernel: [128499.032000] RAP first pts 0x194e7bb1c, stc 0x194e79d1c, pcr valid
Oct 25 06:16:40 dm800se user.warn kernel: [128499.033000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.037000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.041000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.045000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.049000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.054000] audio_cdb_itb_error_isr! underflow
Oct 25 06:16:40 dm800se user.warn kernel: [128499.055000] ch0: lock
Oct 25 06:16:40 dm800se user.warn kernel: [128499.055000] RAP sampling rate info isr
Oct 25 06:16:40 dm800se user.warn kernel: [128499.056000] eModeChange Isr.. set source_changed_event!
Oct 25 06:16:42 dm800se auth.info login[2456]: root login on 'pts/0'
 
AW: Hilfe bei freien Programmen über KD

Die Karte lief vorher in einem von KD receiver.
 
AW: Hilfe bei freien Programmen über KD

Mal das Image erneuert?
 
AW: Hilfe bei freien Programmen über KD

Soll ich ein anderes nehmen, oder das gleiche neu einspielen?
 
AW: Hilfe bei freien Programmen über KD

Mach nebenbei gleich ein neues Image drauf, wäre meine Empfehlung :ja
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

M
DM800se Clone mit Newnigma2 Image - D09 Karte KD
Antworten
2
Aufrufe
2K
Maexchen74
M
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…