-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu Jan 1 01:00:57 1970
-------------------------------------------------------------------------------
1970/01/01 01:00:57 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10604 (mipsel-unknown-linux-gnu-libusb)
1970/01/01 01:00:57 0 s (main) System name = Linux
1970/01/01 01:00:57 0 s (main) Host name =
dm800se
1970/01/01 01:00:57 0 s (main) Release = 3.2-
dm800se
1970/01/01 01:00:57 0 s (main) Version = #1 SMP Fri Jun 6 18:01:34 CEST 2014
1970/01/01 01:00:57 0 s (main) Machine = mips
1970/01/01 01:00:57 0 s (main) Stb model =
dm800se
1970/01/01 01:00:57 0 s (main) The current system time is smaller than the build date (Feb 26 2015). Waiting up to 60 seconds for time to correct
2015/05/15 20:14:44 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 744
2015/05/15 20:14:44 0 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/05/15 20:14:44 0 s [Emu] oscam-emu version 713
2015/05/15 20:14:44 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/05/15 20:14:44 0 s (main) signal handling initialized
2015/05/15 20:14:44 0 s (config) 775 service-id's loaded in 17 ms
2015/05/15 20:14:44 0 s (config) 4 provid's loaded
2015/05/15 20:14:44 0 s (net) monitor: initialized (fd=6, port=988)
2015/05/15 20:14:44 0 s (net) cccam: initialized (fd=7, port=14141)
2015/05/15 20:14:44 0 s (reader) v14 [internal] creating thread for device /dev/sci1
2015/05/15 20:14:44 0 s (reader) hd01 [internal] creating thread for device /dev/sci0
2015/05/15 20:14:44 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/15 20:14:44 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/15 20:14:44 0 s (main) waiting for local card init
2015/05/15 20:14:44 77100588 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/05/15 20:14:44 77100588 r (reader) v14 [internal] Reader sci internal, detected box type:
dm800se
2015/05/15 20:14:44 77101120 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/05/15 20:14:44 77100BB0 r (reader) hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/05/15 20:14:44 77100BB0 r (reader) hd01 [internal] Reader sci internal, detected box type:
dm800se
2015/05/15 20:14:44 77A628 h (webif) webif: decompressed 159358 bytes back into 381788 bytes
2015/05/15 20:14:44 77A628 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2015/05/15 20:14:44 77101120 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/15 20:14:45 77101120 r (reader) emulator [emu] card detected
2015/05/15 20:14:46 77101120 r (reader) emulator [emu] found card system emu
2015/05/15 20:14:46 77101120 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/15 20:14:46 77101120 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/05/15 20:14:46 0 s (main) init for all local cards done
2015/05/15 20:14:46 0 s (anticasc) anti cascading disabled
2015/05/15 20:14:46 77107478 c (client) plain dvbapi-client granted (local, au=on (2 reader))
2015/05/15 20:14:46 77107478 c (dvbapi) dvbapi channelcache loaded from /var/tuxbox/config/oscam.ccache
2015/05/15 20:14:46 77107478 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1830 ECM_PID: 1CE4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1843 ECM_PID: 19E4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09C4 ECM_PID: 1BE4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1AE4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 1860 ECM_PID: 1EE4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 186A ECM_PID: 1DE4 PROVID: 000000
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 found 6 ECMpids and 2 STREAMpids in PMT
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 receiver wants to demux srvid EF78 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 new program number: EF78 (1830:EF78 unknown) [pmt_list_management 3]
2015/05/15 20:14:48 77107478 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/15 20:14:50 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/15 20:14:57 77100588 r (-) -- Skipped 2 duplicated log lines --
2015/05/15 20:14:57 77100588 r (reader) v14 [internal] card detected
2015/05/15 20:14:57 77100BB0 r (reader) hd01 [internal] card detected
2015/05/15 20:14:58 77100BB0 r (reader) hd01 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/15 20:14:58 77100BB0 r (reader) hd01 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/15 20:14:58 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/15 20:14:58 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75182
2015/05/15 20:14:58 77100588 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 20:14:58 77100588 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 20:14:58 77100588 r (reader) v14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/05/15 20:14:59 77100588 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75171
2015/05/15 20:14:59 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:14:59 77100588 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:14:59 77100588 r (reader) v14 [internal] Card responded ok for ifsd request of 251
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] Card type: P1TV
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] Rom version: 20AA
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] Credit available on card: 0 euro
2015/05/15 20:15:00 77100588 r (reader) v14 [internal] detect native nagra card
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] classD0 ins36: encrypted - can't parse
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] no boxID available
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] card system not supported
2015/05/15 20:15:00 77100BB0 r (reader) hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/15 20:15:01 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/15 20:15:01 77100588 r (reader) v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/05/15 20:15:01 77100588 r (reader) v14 [internal] card system not supported
2015/05/15 20:15:01 77100588 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/15 20:15:02 77100BB0 r (reader) hd01 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/15 20:15:02 77100BB0 r (reader) hd01 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/15 20:15:02 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/15 20:15:02 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75157
2015/05/15 20:15:02 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:15:03 77100588 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 20:15:03 77100588 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 20:15:03 77100588 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/15 20:15:03 77100588 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75421
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1830 ECM_PID: 1CEC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1843 ECM_PID: 19EC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09C4 ECM_PID: 1BEC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1AEC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 1860 ECM_PID: 1EEC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 186A ECM_PID: 1DEC PROVID: 000000
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 found 6 ECMpids and 5 STREAMpids in PMT
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 receiver wants to demux srvid EF75 on adapter 0000 camask 0008 index 0003 pmtpid 0061
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 new program number: EF75 (ProSieben HD) [pmt_list_management 3]
2015/05/15 20:15:03 77107478 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/15 20:15:03 77100588 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:15:04 77100588 r (reader) v14 [internal] Warning: Card returned error on setting ifsd value to 251
2015/05/15 20:15:05 77100588 r (reader) v14 [internal] detect native nagra card
2015/05/15 20:15:06 77100BB0 r (reader) hd01 [internal] card system not supported
2015/05/15 20:15:06 77100BB0 r (reader) hd01 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/15 20:15:06 77100BB0 r (reader) hd01 [internal] card initializing error
2015/05/15 20:15:06 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/15 20:15:07 77100588 r (reader) v14 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/05/15 20:15:08 77100588 r (reader) v14 [internal] T1 Resync command error, trying to reactivate!
2015/05/15 20:15:10 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75486
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:15:10 77100588 r (reader) v14 [internal] Card responded ok for ifsd request of 251
2015/05/15 20:15:11 77100588 r (reader) v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/05/15 20:15:11 77100588 r (reader) v14 [internal] card system not supported
2015/05/15 20:15:11 77100588 r (reader) v14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/15 20:15:11 77100588 r (reader) v14 [internal] card initializing error
2015/05/15 20:15:13 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/05/15 20:15:58 77107478 c (-) -- Skipped 14 duplicated log lines --
2015/05/15 20:16:04 77107478 c (-) -- Skipped 2 duplicated log lines --
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1833 ECM_PID: 189A PROVID: 000000
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 09C4 ECM_PID: 1B9A PROVID: 000000
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 098C ECM_PID: 1A9A PROVID: 000000
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 found 3 ECMpids and 2 STREAMpids in PMT
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 receiver wants to demux srvid 006A on adapter 0000 camask 0008 index 0003 pmtpid 0064
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 new program number: 006A (1833:006A unknown) [pmt_list_management 3]
2015/05/15 20:16:04 77107478 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/05/15 20:16:07 77107478 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri May 15 20:17:04 2015
-------------------------------------------------------------------------------
2015/05/15 20:17:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10604 (mipsel-unknown-linux-gnu-libusb)
2015/05/15 20:17:04 0 s (main) System name = Linux
2015/05/15 20:17:04 0 s (main) Host name =
dm800se
2015/05/15 20:17:04 0 s (main) Release = 3.2-
dm800se
2015/05/15 20:17:04 0 s (main) Version = #1 SMP Fri Jun 6 18:01:34 CEST 2014
2015/05/15 20:17:04 0 s (main) Machine = mips
2015/05/15 20:17:04 0 s (main) Stb model =
dm800se
2015/05/15 20:17:04 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1402
2015/05/15 20:17:04 0 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2015/05/15 20:17:04 0 s [Emu] oscam-emu version 713
2015/05/15 20:17:04 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/05/15 20:17:04 0 s (main) signal handling initialized
2015/05/15 20:17:04 0 s (config) 775 service-id's loaded in 17 ms
2015/05/15 20:17:04 0 s (config) 4 provid's loaded
2015/05/15 20:17:04 0 s (net) monitor: initialized (fd=6, port=988)
2015/05/15 20:17:04 0 s (net) cccam: initialized (fd=7, port=14141)
2015/05/15 20:17:04 0 s (reader) v14 [internal] creating thread for device /dev/sci1
2015/05/15 20:17:04 0 s (reader) hd01 [internal] creating thread for device /dev/sci0
2015/05/15 20:17:04 0 s (reader) emulator [emu] creating thread for device emulator
2015/05/15 20:17:04 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/05/15 20:17:04 0 s (main) waiting for local card init
2015/05/15 20:17:04 77101150 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/05/15 20:17:04 5B6978 h (webif) webif: decompressed 159358 bytes back into 381788 bytes
2015/05/15 20:17:04 77100BB0 r (reader) hd01 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
2015/05/15 20:17:04 77100BB0 r (reader) hd01 [internal] Reader sci internal, detected box type:
dm800se
2015/05/15 20:17:04 77100588 r (reader) v14 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
2015/05/15 20:17:04 77100588 r (reader) v14 [internal] Reader sci internal, detected box type:
dm800se
2015/05/15 20:17:04 5B6978 h (webif) HTTP Server running. ip=0.0.0.0 port=8088
2015/05/15 20:17:04 77101150 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/05/15 20:17:05 77101150 r (reader) emulator [emu] card detected
2015/05/15 20:17:05 77100BB0 r (reader) hd01 [internal] card detected
2015/05/15 20:17:05 77100588 r (reader) v14 [internal] card detected
2015/05/15 20:17:06 77101150 r (reader) emulator [emu] found card system emu
2015/05/15 20:17:06 77101150 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/05/15 20:17:06 77101150 r reading key file: /var/tuxbox/config/SoftCam.Key
2015/05/15 20:17:07 77100BB0 r (reader) hd01 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/15 20:17:07 77100BB0 r (reader) hd01 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/15 20:17:07 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/05/15 20:17:07 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75245
2015/05/15 20:17:07 77100588 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 20:17:07 77100588 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 20:17:07 77100588 r (reader) v14 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/05/15 20:17:07 77100588 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75189
2015/05/15 20:17:07 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:17:08 77100588 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:17:08 77100588 r (reader) v14 [internal] Card responded ok for ifsd request of 251
2015/05/15 20:17:08 77100BB0 r (reader) hd01 [internal] Card type: P1TV
2015/05/15 20:17:08 77100BB0 r (reader) hd01 [internal] Rom version: 20AA
2015/05/15 20:17:08 77100BB0 r (reader) hd01 [internal] Credit available on card: 0 euro
2015/05/15 20:17:09 77100588 r (reader) v14 [internal] detect native nagra card
2015/05/15 20:17:09 77100BB0 r (reader) hd01 [internal] classD0 ins36: encrypted - can't parse
2015/05/15 20:17:09 77100BB0 r (reader) hd01 [internal] no boxID available
2015/05/15 20:17:09 77100BB0 r (reader) hd01 [internal] card system not supported
2015/05/15 20:17:09 77100BB0 r (reader) hd01 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/15 20:17:09 77100588 r (reader) v14 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2015/05/15 20:17:09 77100588 r (reader) v14 [internal] card system not supported
2015/05/15 20:17:09 77100588 r (reader) v14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/05/15 20:17:10 77100BB0 r (reader) hd01 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/15 20:17:10 77100BB0 r (reader) hd01 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/05/15 20:17:10 77100BB0 r (reader) hd01 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/15 20:17:10 77100BB0 r (reader) hd01 [internal] Buffers readed 0 bytes total time_us 75152
2015/05/15 20:17:11 77100BB0 r (reader) hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:17:11 77100588 r (reader) v14 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/05/15 20:17:11 77100588 r (reader) v14 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/05/15 20:17:11 77100588 r (reader) v14 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/05/15 20:17:11 77100588 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 75165
2015/05/15 20:17:12 77100588 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/05/15 20:17:13 77100588 r (reader) v14 [internal] Warning: Card returned error on setting ifsd value to 251