Einstellungen mit Easymouse mit S02 und HD+ weisse Karte

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
services = skywelt,skymusicchoiceextra,skycinema,skysport,sky bundesliga,skyhd,skyweltextra,bluemovie,skysonstig e
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2


[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB1
smargopatch = 1
services = hdplus
caid = 1830
rsakey = BXXXXXXXXXXX5
boxkey = AXXXXXXC
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2

011/10/19 7:18:58 400 s >> OSCam << cardserver started, version 1.10rc-svn-SB-Trunk-by-Giftstaub, build #5983 (mips-tuxbox-linux)
2011/10/19 7:18:58 400 s version=1.10rc-svn-SB-Trunk-by-Giftstaub, build #5983, system=mips-tuxbox-linux, nice=-1
2011/10/19 7:18:58 400 s client max. idle=120 sec, debug level=0
2011/10/19 7:18:58 400 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2011/10/19 7:18:58 400 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/10/19 7:18:58 400 s services reloaded: 0 services freed, 4 services loaded, rejected 0
2011/10/19 7:18:58 400 s userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2011/10/19 7:18:58 400 s signal handling initialized (type=sysv)
2011/10/19 7:18:58 400 s 160 service-id's loaded in 14ms
2011/10/19 7:18:58 400 s 116 tier-id's loaded
2011/10/19 7:18:58 400 s 3 provid's loaded
2011/10/19 7:18:58 400 s 22 lengths for caid guessing loaded
2011/10/19 7:18:58 400 s monitor: initialized (fd=8, port=988)
2011/10/19 7:18:58 400 s camd33: disabled
2011/10/19 7:18:58 400 s camd35: disabled
2011/10/19 7:18:58 400 s cs378x: disabled
2011/10/19 7:18:58 400 s newcamd: disabled
2011/10/19 7:18:58 400 s cccam: initialized (fd=9, port=12000, crypted)
2011/10/19 7:18:58 400 s radegast: disabled
2011/10/19 7:18:58 400 s http thread started
2011/10/19 7:18:58 400 s creating thread for device /dev/ttyUSB0
2011/10/19 7:18:58 400 s creating thread for device /dev/ttyUSB1
2011/10/19 7:18:58 C04 h HTTP Server listening on port 666
2011/10/19 7:18:58 1005 r reader thread started (thread= 1005, label=sky, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
2011/10/19 7:18:58 1406 r reader thread started (thread= 1406, label=hd+, device=/dev/ttyUSB1, detect=cd, mhz=368, cardmhz=368)
2011/10/19 7:18:58 400 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/10/19 7:18:58 400 s waiting for local card init
2011/10/19 7:18:58 1005 r ERROR opening device /dev/ttyUSB0
2011/10/19 7:18:58 1005 r Cannot open device: /dev/ttyUSB0
2011/10/19 7:18:58 1406 r WARNING: Failed to reset reader hd+
2011/10/19 7:18:59 1406 r WARNING: Failed to reset reader hd+
2011/10/19 7:19:01 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:01 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:02 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:02 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:03 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:04 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:04 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:05 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:05 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:06 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+
2011/10/19 7:19:06 1406 r ERROR Phoenix_GetStatus: ioctl error in card detection for hd+

Zum Vergrößern anklicken....