AW: Dbox 2 Multicam
Hab so aber das wär dann falsch oder?
# cwshare.cfg --- dbox1 --- Internet und Lokales Netzt
#
# password
#M: { 192.168.69.202 { AA242456 }}
M: { xxxxxx.dyndns.org { 12345678 }}
#C: { 127.0.0.1 25030 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 }
C: { 127.0.0.1 25030 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 17020001:17020000;17020002:17020000;17020003:17020 000 }
# Internet Friends port range password cod
# D: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
# D: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}
# other local boxes
# D: { 192.168.69.202 { 8020 8020 { AB333441 { 5 5 }}}}
# D: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}
D: { yyyyyy.dyndns.org { 25000 25000{ 87654321{ A5 A5 }}}}
# allow maximum 06 share level for recieved card data
I: { 03 }
# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on PayTV
# *3 check/reset ENX freezes on FTA and PayTV
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
#N: { 01 01 03 1F 4000 6000 }
# Send ECM's at maximum 5 cards (please use this as default)
#X: { 05 }
# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
#G: { 17020000 1234 }
#G: { 0B000000 ABCD }
#G: { 05021510 AB34 }
#G: { 0D03A000 A234 }
# For W: please read the cwshare.txt, here only some examples
# use card 1 only for the following pids
# : { 01 02 02 } 1022 100A 100B 102B 1009 101D 1029 1014 1011 101B
# don't use card 2 for the following pids
# : { 02 03 03 } 1008 1016
# S: is the same as W:, just using the SID instead of the ECMPID
N: { 400 200 }