card system not supported

2014/03/26 16:49:58 129748 h hd02 [mouse] Restarting reader
2014/03/26 16:49:58 129748 h hd02 [mouse] creating thread for device /dev/ttyUSB0
2014/03/26 16:49:58 40510BF8 r hd02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=369, cardmhz=357)
2014/03/26 16:49:59 40510BF8 r hd02 [mouse] card detected
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] ATR: 3F 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] Init card protocol T1, FI=1, F=372, D=1, N=0
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] Setting baudrate to 9600 bps
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] Calculated work ETU is 100.81 us reader mhz = 369
2014/03/26 16:50:00 40510BF8 r hd02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/03/26 16:50:01 40510BF8 r hd02 [mouse] card system not supported
2014/03/26 16:50:01 40510BF8 r hd02 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/03/26 16:50:05 40510BF8 r hd02 [mouse] Error activating card.

#!!WICHTIG!!
#Der Pfad zum device kann ggf. abweichen.
# Schaut bitte über sftp den genauen Pfad nach.
#Bei mir finde ich die verschiedenen ttyUSBx unter /dev/usb/ttyUSBx
#wo möglich wird der Reader nicht unter USB0 bei Euch erkannt, dann bitte durch verschiedene #Zahlen von 0-9 durchtesten.
#Anmerkung: Bitte unter Tips und Tricks sehen wir Ihr Oscam über Telnet manuell starten und #stoppen könnt. Erleichtert Euch das Testen.
device = /dev/usb/ttyUSB0
#!!WICHTIG!!

caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
ident = 098C:000000

#Hier kann die mhz Zahl noch angepasst werden. z.B. für Übertakten
#Wenn die mhz Zahl nicht mit der auf der Hardware von der Easymouse übereinstimmt
#in unserem Beispiel 357 kann es zu folgenden Fehlermeldungen kommen:
#Error activating card.
#card initializing error
mhz = 357

cardmhz = 357
group = 1
emmcache = 1,2,2
#oder emmcache = 1,1,2
ndsversion = 2
blockemm-unknown = 1
blockemm-g = 1

2014/05/25 19:39:32 137F78 r Sky_V14_smargo [smartreader] Error activating card.
2014/05/25 19:39:32 137F78 r Sky_V14_smargo [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/05/25 19:39:32 137F78 r Sky_V14_smargo [smartreader] card initializing error
2014/05/25 19:39:39 40412370 c christian (098C&000000/07D2/EF75/98:9C784008F980CBAAC14259C7F3642DBE): rejected group (0 ms) - ProSieben HD (no matching reader)
2014/05/25 19:39:44 103120 h Sky_V14_smargo [smartreader] Restarting reader
2014/05/25 19:39:44 103120 h Sky_V14_smargo [smartreader] creating thread for device SRv2;Serial:smargo
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] De SR_init
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] initing smargo type SRv2
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] Using 0x02/0x81 as endpoint for smartreader hardware detection
2014/05/25 19:39:44 133B48 r Found reader with serial smargo at 001:003
2014/05/25 19:39:44 133B48 r Found smartreader device Serial:smargo
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] Creating smartreader thread.
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] clocking for smartreader with smartreader protocol
2014/05/25 19:39:44 133B48 r Sky_V14_smargo [smartreader] Reader initialized (device=SRv2;Serial:smargo, detect=cd, mhz=369, cardmhz=369)
2014/05/25 19:39:45 133B48 r Sky_V14_smargo [smartreader] card detected
2014/05/25 19:39:45 133B48 r Sky_V14_smargo [smartreader] Doing fast reset
2014/05/25 19:39:46 133B48 r Sky_V14_smargo [smartreader] Error activating card.
2014/05/25 19:39:47 133B48 r Sky_V14_smargo [smartreader] Doing fast reset
2014/05/25 19:39:47 40414068 c wohnzimmer (098C&000000/01F5/001B/98:87FFFFA19C277FE7425BB9FECE00F8E1): rejected group (0 ms) - RTL Crime (no matching reader)
2014/05/25 19:39:48 133B48 r Sky_V14_smargo [smartreader] Error activating card.
2014/05/25 19:39:48 133B48 r Sky_V14_smargo [smartreader] Doing fast reset
2014/05/25 19:39:49 133B48 r Sky_V14_smargo [smartreader] Error activating card.
2014/05/25 19:39:50 133B48 r Sky_V14_smargo [smartreader] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/05/25 19:39:50 133B48 r Sky_V14_smargo [smartreader] card initializing error