Würde aber gerne die Freischaltung mitloggen.

[bizcode]

Hab mir nen Freischaltcode gekauft und werde die Karte in meiner dreambox mit oscam aktivieren. Würde aber gerne die Freischaltung mitloggen.
Wie mache ich das? Passen die Einstellungen?

Mit diesen Reader Einstellungen wird sie erkannt.

Spoiler

[reader]
label                         = HD+02 Karte
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
caid                          = 1843
boxkey                        = A7..7C
rsakey                        = BF..D5
detect                        = cd
mhz                           = 534
cardmhz                       = 369
group                         = 1
emmcache                      = 1,1,2,0
auprovid                      = 003411

Um was für einen Zahlenwert handelt es sich hier beim Serial:Reader bzw welche Bedeutung hat er?

device = Serial:Reader 2B...A8

 

[salidos]

Das ist die "ID" für udev, um nen externen Reader richtig anzusprechen.
Brauchst du nicht unbedingt.

Was versprichst du dir vom mitloggen bei Ner HD+ Karte?

 

[bizcode]

Weißt du wie man die Freischaltung mitloggt und seperat speichert?

 

[salidos]

z.B. mit Last Drakkar.

Aber nochmal: was versprichst du dir davon?

 

[Derek Buegel]

Ne Freischaltung, wie bei Sky-Karten gibt es da doch nicht. Du gibtst bei HD+ Deinen Code ein, dann schicken Die Dir ein oder mehrere EMM und in der Karte wird ein "Schalter" umgelegt bzw ein neuer Timer gesetzt.
Du musst einfach die EMMs loggen.

Spoiler

saveemm-unknown = 1
saveemm-u = 1

 

[salidos]

shared nicht vergessen

 

[bizcode]

saveemm-s = 1

?

Edit:
Passt das?

 

[Vigor]

Ja passt.
Wenn du dir bei solchen Sachen nicht sicher bist, dann mach es über das OScam Webif, dass funktioniert immer.

 

[bizcode]

oscam.conf

Spoiler

[global]
logfile                       = /tmp/oscam.log
nice                          = -1
maxlogsize                    = 3000
waitforcards                  = 0
readerrestartseconds          = 1

emmlogdir                     = /etc/tuxbox/log/oscam-EMM.log
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1

lb_nbest_readers              = 2
lb_nfb_readers                = 4
lb_min_ecmcount               = 3
lb_reopen_seconds             = 120
lb_reopen_invalid             = 0
lb_retrylimit                 = 500
lb_stat_cleanup               = 24
lb_max_readers                = 4
ecmfmt                        = P: c:p:s:d:i: #ECM_L:l #CW=w HOP:j
disablecrccws                 = 1
disablecrccws_only_for        = 1708:000000;1811:003311,003315;09C4:000000;098D:000000;0500:030B00,042820;0604:000000;1819:00006D;0100:00006D;1810:000000;1884:000000;0E00:000000

[streamrelay]
stream_ecm_delay              = 5
stream_relay_ctab             = 098D,0960,0961,0963,0919,093B,09CD

[dvbapi]
enabled                       = 1
pmt_mode                      = 6
request_mode                  = 1
delayer                       = 60
user                          = dvbapiau
read_sdt                      = 2
boxtype                       = dreambox

oscam.reader

Spoiler

####################### Smartcard ############################

[reader]
label                         = HD+02 Karte
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
caid                          = 1843
boxkey                        = A7...7C
rsakey                        = BF..D5
detect                        = cd
mhz                           = 534
cardmhz                       = 369
group                         = 1
emmcache                      = 1,1,2,0
auprovid                      = 003411

#
user = dvbapiau
au = 1
group = 1

Ich bekomme die Karte damit nicht aktiviert. Wo liegt der Denkfehler?

 

[MKLST2]

mach mal

mhz = 368
cardmhz = 368

im reader

wer weis ob die Karte überhaupt erkannt und richtig eingeles1en wird?

dazu poste bitte ein log

 

[bizcode]

Die Karte wird mit meinen Einstellungen. Entitlesment kann ich ja sehen. Nur kommt offenbar nichts an EMM an.

Spoiler

[SPOILER="Log"


2023/11/03 02:12:26 00000000 s (main) System name = Linux
2023/11/03 02:12:26 00000000 s (main) Host name = two
2023/11/03 02:12:26 00000000 s (main) Release = 4.9
2023/11/03 02:12:26 00000000 s (main) Version = #1 SMP PREEMPT Thu Apr 20 10:38:32 UTC 2023
2023/11/03 02:12:26 00000000 s (main) Machine = aarch64
2023/11/03 02:12:27 00000000 s (main) Stb model = two
2023/11/03 02:12:27 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 30754
2023/11/03 02:12:27 00000000 s (config) services reloaded: 0 services freed, 2 services loaded, rejected 0
2023/11/03 02:12:27 00000000 s (emu) OSCam-Emu version 798
2023/11/03 02:12:27 00000000 s (config) userdb reloaded: 0 accounts loaded, 0 expired, 0 disabled
2023/11/03 02:12:27 00000000 s (main) signal handling initialized
2023/11/03 02:12:27 00000000 s (config) 6 provid's loaded
2023/11/03 02:12:27 00000000 s (config) 11 service-id's loaded in 0 ms
2023/11/03 02:12:27 00000000 s (net) cs378x: initialized (fd=5, port=15000)
2023/11/03 02:12:27 00000000 s (reader) emulator_(constant.cw) [unknown] Protocol Support missing. (typ=37)
2023/11/03 02:12:27 00000000 s (reader) emulator_(SoftCam.key) [emu] creating thread for device /etc/tuxbox/config/SoftCam.key
2023/11/03 02:12:27 00000000 s (reader) HD+02_Karte [internal] creating thread for device /dev/sci0
2023/11/03 02:12:27 00000000 s (main) waiting for local card init
2023/11/03 02:12:27 474BEC37 r (reader) HD+02_Karte [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2023/11/03 02:12:27 474BEC37 r (reader) HD+02_Karte [internal] Reader sci internal, detected box type: two
2023/11/03 02:12:27 3A1CA089 r (emu) Stream key delayer initialized
2023/11/03 02:12:27 21EA46A5 h (webif) webif: decompressed 163847 bytes back into 402760 bytes
2023/11/03 02:12:27 21EA46A5 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2023/11/03 02:12:27 3A1CA089 r (emu) Stream relay server initialized
2023/11/03 02:12:27 3A1CA089 r (reader) emulator_(SoftCam.key) [emu] Reader initialized (device=/etc/tuxbox/config/SoftCam.key, detect=cd, mhz=357, cardmhz=357)
2023/11/03 02:12:27 00000000 (emu) INFO: FFDecsa parallel mode = 32
2023/11/03 02:12:28 474BEC37 r (reader) HD+02_Karte [internal] card detected
2023/11/03 02:12:28 3A1CA089 r (reader) emulator_(SoftCam.key) [emu] card detected
2023/11/03 02:12:28 474BEC37 r (reader) HD+02_Karte [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2023/11/03 02:12:29 3A1CA089 r (reader) emulator_(SoftCam.key) [emu] found card system emu
2023/11/03 02:12:29 3A1CA089 r (reader) emulator_(SoftCam.key) [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/11/03 02:12:29 3A1CA089 r (emu) Key file not found in: /etc/tuxbox/config
2023/11/03 02:12:29 3A1CA089 r (emu) Key file not found in: /var/keys
2023/11/03 02:12:29 3A1CA089 r (emu) Total keys in memory: W:0 V:0 N:0 I:0 F:0 G:0 P:0 T:0 A:0
2023/11/03 02:12:30 474BEC37 r (reader) HD+02_Karte [internal] detect native nagra card
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [internal] ready for requests
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [internal] found card system nagra
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] ROM: D N A S P 1 8 0
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] REV: M e r 0 0 0
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] SER: ############
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] CAID: 1843
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] Prv.ID: 00 00 34 11 (sysid)
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] Prv.ID: 00 00 00 00
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] IRD ID: ############
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] active to: 2022/12/18 23:14
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] -----------------------------------------
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] |id |tier |valid from |valid to |
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] +----+--------+------------+------------+
2023/11/03 02:12:31 474BEC37 r (reader) HD+02_Karte [nagra] -----------------------------------------
2023/11/03 02:12:32 00000000 s (main) init for all local cards done
2023/11/03 02:12:32 10D0AD7F c (client) plain dvbapi-client granted (anonymous, au=off)
2023/11/03 02:12:32 10D0AD7F c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum number of filters is 48 (oscam limit is 64)
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Detected /dev/dvb/adapter0/ca0 device, total available descramblers: 8
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1843 ECM_PID: 19CC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1ACC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 4 CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 5 CAID: 186A ECM_PID: 1FCC PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 6 CAID: 186D ECM_PID: 1FCD PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 7 CAID: 098D ECM_PID: 0108 PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 8 CAID: 1842 ECM_PID: 1FDF PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 9 CAID: 4B64 ECM_PID: 1FDF PROVID: 000000
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 ecmpid 10 CAID: 4AF4 ECM_PID: 0109 PROVID: 000001
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 found 11 ECM pids and 7 STREAM pids in CA PMT
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 trying to descramble PID 0 CAID 1830 PROVID 000000 ECMPID 1CCC ANY CHID PMTPID 0060 VPID 00FF
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 trying to descramble PID 1 CAID 1843 PROVID 000000 ECMPID 19CC ANY CHID PMTPID 0060 VPID 00FF
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1ACC ANY CHID PMTPID 0060 VPID 00FF
2023/11/03 02:12:32 10D0AD7F c (dvbapi) Demuxer 0 trying to descramble PID 4 CAID 09C4 PROVID 000000 ECMPID 1BCC ANY CHID PMTPID 0060 VPID 00FF
2023/11/03 02:12:32 3A1CA089 r (emu) ECM failed: Not supported
2023/11/03 02:12:32 10D0AD7F c (-) -- Skipped 1 duplicated log lines --
2023/11/03 02:12:32 10D0AD7F c (ecm) anonymous (P: 098C:000000:EF10:1ACC:0641: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:00): not found (1 ms) by emulator_(SoftCam.key) - RTL HD
2023/11/03 02:12:32 10D0AD7F c (ecm) anonymous (P: 09C4:000000:EF10:1BCC:0641: #ECM_L:B7 #CW=00000000000000000000000000000000 HOP:00): not found (2 ms) by emulator_(SoftCam.key) - RTL HD
2023/11/03 02:12:32 3A1CA089 r (emu) Key not found: N 6271 00
2023/11/03 02:12:32 3A1CA089 r (emu) ECM failed: Key not found
]

[/SPOILER]

 

[MKLST2]

ah, ich denk in der oscam.conf fehlt unter [dvbapi] ein

au = 1


2023/11/03 02:12:32 10D0AD7F c (client) plain dvbapi-client granted (anonymous, au=off)

der user sollte dvbaspi sein, nicht anonymous

 

[bizcode]

Und wie stellt man letzteres ein?

 

[MKLST2]

bist du nicht im Webif?

 

[bizcode]

Doch, aber finde mich gerade nicht zurecht.