V14 verlängern

[apollocreed]

Hallo,

ich bekomme meine neue V14 nicht hell. Könnt ihr mir vielleicht helfen?

00 00 50 31 03

 

[salidos]

AW: V14 aktivieren

Was ist das?
Ne Kartennummer?
Maße von was auch immer?
Poste mal was an EMMs ankommt.

 

[apollocreed]

AW: V14 aktivieren

Hallo,
das finde ich aktuell im Log

• 2015/08/23 17:02:31 87D080 r (reader) V14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2015/08/23 17:02:31 87D080 r (reader) V14 [videoguard2] classD3 ins54: no cw --> Tier expired
• 2015/08/23 17:02:31 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (52 ms) by V14
• 2015/08/23 17:02:31 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (1 ms) by V14
• 2015/08/23 17:02:31 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (4 ms) by V14
• 2015/08/23 17:02:31 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:32 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (3 ms) by V14
• 2015/08/23 17:02:32 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:32 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:32 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:33 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:33 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (1 ms) by V14
• 2015/08/23 17:02:33 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14
• 2015/08/23 17:02:33 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (1 ms) by V14
• 2015/08/23 17:02:34 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (1 ms) by V14
• 2015/08/23 17:02:34 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (3 ms) by V14
• 2015/08/23 17:02:34 87E730 c (ecm) anonymous (098C&000000/0068/00F1/98:CC6911C21DF51519C145212B9C5A9C15): not found (2 ms) by V14

 

[salidos]

AW: V14 aktivieren

Dann schreib deinen letzten Verlängerer aus deinem Log der heute ankam und gut is.

 

[apollocreed]

AW: V14 aktivieren

woran erkenne ich denn den letzten verlängerer?

 

[salidos]

AW: V14 aktivieren

Na, von Datum und Uhrzeit her.
Wird doch alles geloggt.
Aber bevor du was draufschreibst, poste mal was heute bei dir an EMMs ankam.

 

[Derek Buegel]

AW: V14 aktivieren

anonymous

Sieht so aus, als ob bei der dvbapi was nicht stimmt. Poste mal Deine Konfigs.

 

[apollocreed]

AW: V14 aktivieren

ich stelle mich glaube ich etwas glatt an. Im Webinteface vom Oscam ist nicht ein EMM zu sehen.

- - - - - - - - - -

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
clienttimeout = 5000
fallbacktimeout = 2500
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
emmlogdir = /tmp/

[cache]
max_time = 18

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

oscam.dvbapi
P:098C 1
I:0

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
emmlogdir = /tmp
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
saveemm-u = 1
ndsversion = 2

[reader]
label = HDPLUS_DE_HD0X
description = HD01 or HD02 (NAGRA)
protocol = internal
device = /dev/sci1
caid = 1830,1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,2,2,0

[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8 ;0D03:000000,000004,000008,000024,000028;0D05:0000 00,000004,000010;090F:000000;0500:000000,030B00,02 3800,021110,007400,007800;1801:000000,007301;0604: 000000;2600:000000;FFFF:000000
group = 3
emmcache = 1,1,2,1
auprovid = 030B00

 

[salidos]

AW: V14 aktivieren

Und wo ist die oscam.User?

 

[Derek Buegel]

AW: V14 aktivieren

Die oscam.user sieht hoffentlich so aus.
oscam.user

Spoiler

[account]
user = lokal
au = 1
group = 1,2,3

Das bitte entfernen und durch (V14 Reader)

Spoiler

# blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
blockemm-u = 1

ersetzen.
Dann mal den Payload auslesen.

 

[apollocreed]

AW: V14 aktivieren

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
clienttimeout = 5000
fallbacktimeout = 2500
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
emmlogdir = /tmp/

[cache]
max_time = 18

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

oscam.dvbapi

Spoiler

P:098C 1
I:0

oscam.server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
emmlogdir = /tmp/
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
saveemm-u = 1
ndsversion = 2

[reader]
label = HDPLUS_DE_HD0X
description = HD01 or HD02 (NAGRA)
protocol = internal
device = /dev/sci1
caid = 1830,1843
boxkey = A7642F57BC96D37C
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
detect = cd
mhz = 450
cardmhz = 2700
group = 2
emmcache = 1,2,2,0
<br>
[reader]
label = emulator
protocol = emu
device = emulator
caid = 0D00,0D02,0D03,0D05,090F,0500,1801,0604,2600,FFFF
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8 ;0D03:000000,000004,000008,000024,000028;0D05:0000 00,000004,000010;090F:000000;0500:000000,030B00,02 3800,021110,007400,007800;1801:000000,007301;0604: 000000;2600:000000;FFFF:000000
group = 3
emmcache = 1,1,2,1
auprovid = 030B00

- - - - - - - - - -

ups, vergessen. Hier ist er

oscam.user

Spoiler

[account]
user = lokal
au = v14
group = 1,2

 

[salidos]

AW: V14 aktivieren

...da is se ja.

 

[apollocreed]

AW: V14 aktivieren

was ist Payload und wo kann ich das auslesen?<br><br>
<br>

 

[Derek Buegel]

AW: V14 aktivieren

Ist so sehr schlecht zu lesen.
au = V14
Bei Dir steht au = v14 - siehst Du den Unterschied? au = 1 oder Labelname. Der HD+ Reader bekommt so kein au.
au = V14,HDPLUS_DE_HD0X

MfG

Bitte Spoiler verwenden. Du bist doch im oscam-Web-If?

[h=4]au[/h]

Sie müssen registriert sein, um Links zu sehen.

Parameter ist optional
Hier wird dem User erlaubt, EMM's an alle, eine bestimmte, oder mehrere reader zu schicken.
Beispiel:
au = 1
au = label_of_reader # (label_of_reader wird in der oscam.server konfiguriert)
au = label_of_reader,label_of_reader # (multiple readerliste ab build >= #4617)

 

[apollocreed]

AW: V14 aktivieren

Ok, das verstehe ich ... Spoiler habe ich auch verstanden ... bin etwas raus aus dem thema. Nur was hat der HD+ reader damit zu tun? Ich habe den HD+ User erst mal komplett aus der Config genommen. Ich möchte doch die V14 hell bekommen.