V14 mit Fritzbox 3370 und Freetz aktivieren

[Tomtom2010]

Hi ich hab eine V14 und die besagte Fritzbox 3370

Welche Oscam Version würdet ihr nehmen und wo finde ich die Dateien ich ich die V14 läufig aktivere unter CCCam 2.30 läuft sie.

Was muss ich alles beachten?

Danke

 

[nader]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

Falls du die V14 schon länger mit der CCcam betrieben hast, ist sie zu 99 Prozent gepairt und du brauchst dir keine Gedanken mehr zu machen. Ich würde dir empfehlen die dementsprechenden Threads hier im Board zu lesen.

Gruß

 

[Tomtom2010]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

nein nicht lange ich find aber auch nicht mal den Payload ich habe eine Fritzbox mit easymouse so sieht meine Oscam.server aus

Spoiler

[reader]label = v14
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
fallback = 1
caid = 098C
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 15
readtiers = 2
ecmwhitelist = 098C:98,97,9B,57,91
ecmheaderwhitelist = 81709800000120,80709800000120,8170950000011D,80709 50000011D,8070940000011C,8170940000011C,8170540000 011D
detect = cd
nagra_read = 1
mhz = 600
group = 5
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 1
ndsversion = 2

so meine logfile

Spoiler

• 2015/08/23 09:57:35 53B6F0 r v14 [mouse] card initializing error
• 2015/08/23 09:57:36 0 s init for all local cards done
• 2015/08/23 09:57:36 0 s anti cascading disabled
• 2015/08/23 09:57:37 541038 c encrypted cccam-client 192.168.178.37 granted (DreamSE, au=auto (1 reader))
• 2015/08/23 09:57:48 52C088 h all debug_level=2
• 2015/08/23 09:57:50 52C088 h all debug_level=6
• 2015/08/23 09:57:51 53B6F0 r v14 [mouse] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
• 2015/08/23 09:58:19 0 --- Skipped 27 duplicated log lines ---
• 2015/08/23 09:58:19 52C088 h Reader v14 restarted by WebIF from 192.168.178.47
• 2015/08/23 09:58:20 53B6F0 r v14 [mouse] creating thread for device /dev/ttyUSB0
• 2015/08/23 09:58:20 54B2A0 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
• 2015/08/23 09:58:21 54B2A0 r v14 [mouse] card detected
• 2015/08/23 09:58:21 54B2A0 r v14 [mouse] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
• 2015/08/23 09:58:21 54B2A0 r v14 [mouse] ATR: 0E F0 00 F1 BE F0 CE E3 FE F2 B2 FC FE 7E F0 F2 FE 8C
• 2015/08/23 09:58:21 54B2A0 r ERROR: this ATR TS byte is 0E and that should be 3B for direct or 3F for inverse convention!
• 2015/08/23 09:58:21 54B2A0 r v14 [mouse] ERROR: Could not read reader->convention
• 2015/08/23 09:58:21 54B2A0 r v14 [mouse] Error activating card.
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] ATR: 0E F0 00 F1 BE F0 CE E3 FE F2 B2 FC FE 7E F0 F2 FE 8C
• 2015/08/23 09:58:22 54B2A0 r ERROR: this ATR TS byte is 0E and that should be 3B for direct or 3F for inverse convention!
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] ERROR: Could not read reader->convention
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] Error activating card.
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] ATR: 0E F0 00 F1 BE F0 CE E3 FE F2 B2 FC FE 7E F0 F2 FE 8C
• 2015/08/23 09:58:22 54B2A0 r ERROR: this ATR TS byte is 0E and that should be 3B for direct or 3F for inverse convention!
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] ERROR: Could not read reader->convention
• 2015/08/23 09:58:22 54B2A0 r v14 [mouse] Error activating card.
• 2015/08/23 09:58:23 54B2A0 r v14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/08/23 09:58:23 54B2A0 r v14 [mouse] card initializing error
• 2015/08/23 09:58:24 54B2A0 r v14 [mouse] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
• 2015/08/23 09:59:19 0 --- Skipped 54 duplicated log lines ---
• 2015/08/23 10:00:19 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:01:19 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:02:19 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:02:32 0 --- Skipped 14 duplicated log lines ---
• 2015/08/23 10:02:32 52C088 h Got sigpipe signal -> captured
• 2015/08/23 10:02:33 0 --- Skipped 3 duplicated log lines ---
• 2015/08/23 10:02:33 54B2A0 r v14 [mouse] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
• 2015/08/23 10:03:33 0 --- Skipped 59 duplicated log lines ---
• 2015/08/23 10:04:33 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:05:33 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:05:59 0 --- Skipped 26 duplicated log lines ---
• 2015/08/23 10:05:59 52C088 h Refresh Server requested by WebIF from 192.168.178.47
• 2015/08/23 10:05:59 54B2A0 r v14 [mouse] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
• 2015/08/23 10:06:59 0 --- Skipped 59 duplicated log lines ---
• 2015/08/23 10:07:59 0 --- Skipped 60 duplicated log lines ---
• 2015/08/23 10:08:59 0 --- Skipped 60 duplicated log lines ---

 

[Derek Buegel]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

Ändere mal den Reader so:

Spoiler

[reader]
label = Sky
description = Sky_V14
enable = 1
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

Bitte noch die anderen Konfigs.

MfG

 

[Tomtom2010]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

Okay

oscam.config

Spoiler

[global]logfile = /var/tbmodlog/oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 1000
preferlocalcards = 1


[cache]
delay = 5


[cccam]
port = 32456
nodeid = AAC2465110C5150C
version = 2.0.11
updateinterval = 200


[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
monlevel = 1
hideclient_to = 30


[webif]
httpport = 83
httprefresh = 10
httphideidleclients = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
http_status_log = 1

oscam.server

Spoiler

[reader]label = Sky
description = Sky_V14
enable = 1
protocol = mouse
device = /dev/ttyUSB0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.user

Spoiler

[account]user = DreamSE
pwd = 12345
caid = 09C4
au = 1
group = 1


[account]
user = Edision
pwd = 23456
group = 1
au = 1
caid = 09C4


[account]
user = Atemio
pwd = 34567
group = 1
au = 1
caid = 09C4


[account]
user = Keller
pwd = 98765
group = 1
au = 1
caid = 09C4

ich hatte in der Easymouse 2 eine V13 jetzt die V14 muss ich noch etwas ändern?

Danke

 

[Derek Buegel]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

Hast Du eine whitelist? Wenn ja Die mal löschen/auskommentieren.
Im User DreamSE die CAID lösche oder auf 098C ändern!!

MfG

 

[webman2]

AW: V14 mit Fritzbox 3370 und Freetz aktivieren

Problem wird bereits in einem anderen thread bearbeitet ... deswegen mache ich hier zu.