v13 dunkel

[mumpitzer]

Hallo,

ich habe seit langem eine v13 Karte mit OSCAM um VDR im Einsatz. Vor ca. 4 Wochen kam unaufgefordert ein Reciver den ich aber erst mal hab liegen lassen da ich keine Zeit hatte mit mti der Sache zu befassen. Seit ca. 1 Woche bleigt es jetzt dunkel. Ich hatte mir eingebildet, dass die Sache mit dem Paring mit v14 Karten einher geht. Dem scheint ab nicht so zu sein ... nehme ich an. Mein Log sieht jetzt so aus:

Spoiler

2014/11/02 14:43:02 240C010 r sky_reader [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/02 14:43:03 240C010 r sky_reader [mouse] card detected
2014/11/02 14:43:05 240C010 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 14:43:05 240C010 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 14:43:05 240C010 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 14:43:05 240C010 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 14:43:05 240C010 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 14:43:05 240C010 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 14:43:05 240C010 r sky_reader [mouse] Error activating card.
2014/11/02 14:43:08 240C010 r sky_reader [mouse] ATR: 3F FF 11 25 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/02 14:43:08 240C010 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 14:43:08 240C010 r sky_reader [mouse] Init card protocol T1, FI=1, F=372, D=1, N=63
2014/11/02 14:43:08 240C010 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 14:43:08 240C010 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 14:43:08 240C010 r sky_reader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/02 14:43:10 240C010 r sky_reader [mouse] Warning: Card returned error on setting ifsd value to 128
2014/11/02 14:43:13 240C010 r sky_reader [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 14:43:14 240C010 r sky_reader [mouse] T1 Resync command error, trying to reactivate!
2014/11/02 14:43:17 240C010 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 14:43:17 240C010 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 14:43:17 240C010 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 14:43:17 240C010 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 14:43:17 240C010 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 14:43:17 240C010 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 14:43:17 240C010 r sky_reader [mouse] card system not supported
2014/11/02 14:43:17 240C010 r sky_reader [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/02 14:43:19 240C010 r sky_reader [mouse] ATR: 3F FF 11 25 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/02 14:43:19 240C010 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 14:43:19 240C010 r sky_reader [mouse] Init card protocol T1, FI=1, F=372, D=1, N=63
2014/11/02 14:43:19 240C010 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 14:43:19 240C010 r sky_reader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/02 14:43:21 240C010 r sky_reader [mouse] Warning: Card returned error on setting ifsd value to 128
2014/11/02 14:43:23 240C010 r sky_reader [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 14:43:25 240C010 r sky_reader [mouse] T1 Resync command error, trying to reactivate!
2014/11/02 14:43:27 240C010 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 14:43:27 240C010 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 14:43:27 240C010 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 14:43:27 240C010 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 14:43:27 240C010 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 14:43:27 240C010 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 14:43:27 240C010 r sky_reader [mouse] card system not supported
2014/11/02 14:43:27 240C010 r sky_reader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/02 14:43:27 240C010 r sky_reader [mouse] card initializing error

Die Karte war NIE in dem Reciver. Ist die Karte jetzt trotzdem gepairt? Kann ich etwas dagegen tun?

TIA

 

[cojo]

AW: v13 dunkel

nee,berifft v13 und 14 ,das steht hier aber überall,etwas lesen würde helfen
wobei ich bei deiner meldung eher sagen würde,die Karte wird garnich richtig eingelesen.
Musst schon alle configs posten,ohne wird das eh nix,auch mal Payload auslesen wenn die karte erkannt wird

 

[mumpitzer]

AW: v13 dunkel

Danke für die Antwort in Lichtgeschwindigkeit

nee,berifft v13 und 14 ,das steht hier aber überall,etwas lesen würde helfen

... ich weis ...

wobei ich bei deiner meldung eher sagen würde,die Karte wird garnich richtig eingelesen.

Dann bin ich erst mal beruhigt!

Musst schon alle configs posten,ohne wird das eh nix

Eh klar, ich wollte aber erst mal wissen ob es sich lohnt

auch mal Payload auslesen wenn die karte erkannt wird

An die Arbeit ... hier erst mal die Server-Config, die sollte ja IMO erst mal reichen:

Spoiler

[reader]
label = sky_reader
protocol = mouse
device = /dev/ttyUSB1
services = skyall
caid = 09C4
boxid = 12345678
boxkey = 1122334455667788
detect = cd
ident = 09C4:000000
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Die "blockemm"'s hab ich nachträglich dazu geschrieben.

 

[Zwenny]

AW: v13 dunkel

Wenn deine karte die ganze Zeit ohne blockemm Einträge gelaufen ist, ist die Wahrscheinlichkeit hoch das sie gepairt ist.

Payload mal auslesen, livelog/show settings auf 4 stellen und nach Decrypted payload suchen.

 

[DarkStarXxX]

AW: v13 dunkel

1. Wird deine Karte nicht erkannt.
2. Was ist das für eine Unsitte die selbe Frage in verschiedenen Foren zu posten?

 

[mumpitzer]

AW: v13 dunkel

mit "4" sieht das Ganze jetzt so aus:

Spoiler

2014/11/02 15:56:55 25C9300 r sky_reader [mouse] creating thread for device /dev/ttyUSB0
2014/11/02 15:56:55 300048D0 r sky_reader [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/02 15:56:55 300048D0 r sky_reader [mouse] card detected
2014/11/02 15:56:55 300048D0 r sky_reader [mouse] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:56:58 300048D0 r sky_reader [mouse] Error activating card.
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:57:01 300048D0 r sky_reader [mouse] Error activating card.
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] Init card protocol T1, FI=1, F=372, D=1, N=63
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:04 300048D0 r sky_reader [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/02 15:57:05 300048D0 r sky_reader [mouse] Warning: Card returned error on setting ifsd value to 128
2014/11/02 15:57:06 300048D0 r sky_reader [mouse] passed history check
2014/11/02 15:57:06 300048D0 r sky_reader [mouse] type: VideoGuard Sky Austria/Germany (09C4), baseyear: 2004
2014/11/02 15:57:06 300048D0 r sky_reader [mouse] write to cardreader
2014/11/02 15:57:08 300048D0 r sky_reader [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/02 15:57:10 300048D0 r sky_reader [mouse] T1 Resync command error, trying to reactivate!
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] ATR: 3F FF 11 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] Init card protocol T5, FI=1, F=372, D=1, N=255
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] Setting baudrate to 9600 bps
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] failed to read 7401 cmd length (00 00)
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] passed history check
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] card system not supported
2014/11/02 15:57:12 300048D0 r sky_reader [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:57:14 300048D0 r sky_reader [mouse] Error activating card.
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:57:17 300048D0 r sky_reader [mouse] Error activating card.
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] ATR: 3F FF 11 25 00 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] Init card protocol T15, FI=1, F=372, D=1, N=0
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] ERROR: Parse_ATR returned error
2014/11/02 15:57:20 300048D0 r sky_reader [mouse] Error activating card.
2014/11/02 15:57:21 300048D0 r sky_reader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/02 15:57:21 300048D0 r sky_reader [mouse] card initializing error

"payload" kommt in dem oscam log nicht (case ignored) vor.

 

[mumpitzer]

AW: v13 dunkel

1. Wird deine Karte nicht erkannt.

Bleibt die Frage: Warum plötzlich?

 

[Eliteforce]

AW: v13 dunkel

Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default

Hast Du da eine Easymouse laufen? Einstellung am Reader?

Irgendwas stimmt bei den Reader nicht, das fehlt!

mhz = 357

Den Wert musst Du, wenn eine Mouse läuft natürlich auch per Jumper setzen!

 

[fadeaway]

AW: v13 dunkel

Ist ein Standardwert. Wenn so gesetzt taucht der nicht auf. Ebenso cardmhz. Warum aber der Boxkey...

 

[mumpitzer]

AW: v13 dunkel

Ich bin ein Stück weiter. Das hier: https://www.digital-eliteboard.com/...t-smargo-mouseprotokoll-nicht-ans-laufen.html hat erst mal weiter geholfen. Ich habe auf "smartreader" umgestellt und jetzt sieht das Log so aus:

Spoiler

2014/11/02 16:35:12 140009D0 r sky_reader [smartreader] Reader initialized (device=006:005, detect=cd, mhz= AUTO, cardmhz=369)
2014/11/02 16:35:13 140009D0 r sky_reader [smartreader] card detected
2014/11/02 16:35:18 140009D0 r sky_reader [smartreader] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/11/02 16:35:18 140009D0 r sky_reader [smartreader] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/11/02 16:35:18 140009D0 r sky_reader [smartreader] Calculated work ETU is 69.66 us reader mhz = 534
2014/11/02 16:35:18 140009D0 r sky_reader [smartreader] Effective reader settings mhz =534 F= 372 D= 1 N=3 T=0 inv=1 parity=ODD
2014/11/02 16:35:18 140009D0 r sky_reader [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/11/02 16:35:19 140009D0 r sky_reader [smartreader] Card type: P1TV
2014/11/02 16:35:19 140009D0 r sky_reader [smartreader] Rom version: 10A7
2014/11/02 16:35:19 140009D0 r sky_reader [smartreader] Unable to get smartcard credit
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] FuseByte: 25
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] Region Code: 00BO0102
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] Country Code: DEU
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] Pincode read: 1588
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] PCB settings: FF FF FF FF
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] type: VideoGuard Sky Austria/Germany (09C4), caid: 09C4
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] ready for requests
2014/11/02 16:35:20 140009D0 r sky_reader [smartreader] found card system videoguard2
2014/11/02 16:35:20 140009D0 r sky_reader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/02 16:35:20 140009D0 r sky_reader [videoguard2] card detected
2014/11/02 16:35:20 140009D0 r sky_reader [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
2014/11/02 16:35:24 140009D0 r sky_reader [videoguard2] tier: 0046, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:24 140009D0 r sky_reader [videoguard2] tier: 0056, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:24 140009D0 r sky_reader [videoguard2] tier: 0057, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 0058, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 007b, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 007d, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 008e, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00c0, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00c7, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00c8, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00c9, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00ca, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00cb, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00f3, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00fa, expiry date: 2015/02/05-00:01:00
2014/11/02 16:35:25 140009D0 r sky_reader [videoguard2] tier: 00ff, expiry date: 2015/02/05-00:01:00

Mit dieser Config:

Spoiler

[reader]
label = sky_reader
enable = 1
protocol = smartreader
device = 006:005
services = skyall
caid = 09C4
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Es ist noch immer alles und ich sehe solche Zeilen:

Spoiler

2014/11/02 16:41:35 54016E80 c sky (09C4&000000/100E/007C/B3:30B1B46100CC46E0563F8120A1A0F9D6): rejected group (0 ms) (no matching reader)
2014/11/02 16:41:49 54016E80 c sky (09C4&000000/100E/007C/B3:6DA3FF3AE5D552102100D929668F2185): rejected group (0 ms) (no matching reader)

 

[DarkStarXxX]

AW: v13 dunkel

Wie wäre es denn einfach mal mit LB Stats resetten?

 

[mumpitzer]

Jetzt sehe ich mit Log 4 "Decrypted palyload" einträg:

Spoiler

2014/11/02 16:44:50 7BA110 r sky_reader [smartreader] Decrypted payload
2014/11/02 16:44:50 7BA110 31 FB A9 F5 05 50 56 57 A3 43 04 8A 55 0E 22 AB
...
2014/11/02 16:44:50 7BA110 r sky_reader [smartreader] Decrypted payload
2014/11/02 16:44:50 7BA110 54 14 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2014/11/02 16:44:50 7BA110 00 00 00 00 00 00

- - - - - - - - - -

Wie wäre es denn einfach mal mit LB Stats resetten?

Getan, kein Effekt ...

Shit ... jetzt war es MEIN fehler! Ich hatt die "services" zerändert ... alles gut, geht wieder ... vielen Dank für die Mühe!!