V 14 wird nicht hell

[sperle1]

Hallo zusammen

ich habe eine Sky karte V14 ( Neuvertrag ) die ich schon in einem Sky Receiver aktiviert habe

Ich wollte sie gerne in meiner Golden Media Triplex Box am laufen bekommen

Ich habe Oscamr9963 installiert welches auch läuft
Sky sender laufen aber nicht
Ih habe versucht die Configs nach vorgaben hier aus dem Board ( und mit viel Hilfe von Pilot " danke " ) einzustellen.
ich habe sie noch einmal nach einem beitrag hier bei oscam versucht einzustellen
Hier sind meine Config
vieleicht könnt ihr mir helfen


config

Spoiler

[global]
logfile = stdout
nice = -1

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

user

Spoiler

[account]
user = lokal
au = V14
group = 1
betatunnel = 1833.FFFF:1702

server

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0 caid = 098Cboxid = 12345678
ins7e11 = 15
detect = cd
group = 1ecmwhitelist = 098C:98,9B,97;57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

dvbapi

Spoiler

P:098C
I:0

livelog

Spoiler

• 2015/03/30 17:42:30 4F7510 r V14 [internal] classD0 ins36: encrypted - can't parse
• 2015/03/30 17:42:30 4F7510 r V14 [internal] no boxID available
• 2015/03/30 17:42:30 4F7510 r V14 [internal] card system not supported
• 2015/03/30 17:42:30 4F7510 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
• 2015/03/30 17:42:32 4F7510 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/03/30 17:42:32 4F7510 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/03/30 17:42:32 4F7510 r V14 [internal] Calculated work ETU is 104.20 us reader mhz = 357
• 2015/03/30 17:42:33 4F7510 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
• 2015/03/30 17:42:37 4F7510 r V14 [internal] card system not supported
• 2015/03/30 17:42:37 4F7510 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/03/30 17:42:37 4F7510 r V14 [internal] card initializing error
• 2015/03/30 17:42:37 0 s init for all local cards done
• 2015/03/30 17:42:37 4FD8B8 c plain dvbapi-client granted (lokal, au=on (1 reader))
• 2015/03/30 17:42:37 4FD8B8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2015/03/30 17:42:38 4FD8B8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
• 2015/03/30 17:42:38 4FD8B8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
• 2015/03/30 17:42:38 4FD8B8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
• 2015/03/30 17:42:38 4FD8B8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
• 2015/03/30 17:42:38 4FD8B8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
• 2015/03/30 17:42:38 4FD8B8 c Found 5 ECMpids and 2 STREAMpids in PMT
• 2015/03/30 17:42:38 4FD8B8 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
• 2015/03/30 17:42:38 4FD8B8 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
• 2015/03/30 17:42:38 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:38 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:39 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:39 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:39 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:40 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:40 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:40 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:40 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:41 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:41 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:41 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:42 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:42 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2015/03/30 17:42:42 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:42:43 4FD8B8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

 

[Rohrby]

AW: V 14 wird nicht hell

die ich schon in einem Sky Receiver aktiviert habe

Da wird sie sehr wahrscheinlich gepairt sein! Lies den Payload aus dann weist du mehr!

https://www.digital-eliteboard.com/...-status-und-auswirkung-auf-das-oscam-log.html

 

[4gx35]

AW: V 14 wird nicht hell

bitte log nur vom oscam start an posten und nicht aus livelog
sondern webif-files-logfile verwenden
betatunnel braucht man für v14 nicht

 

[sperle1]

AW: V 14 wird nicht hell

im webif files logfile steht nichts drin

sind das die files vom payload?

Spoiler

• 015/03/30 17:49:49 4FD8B8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2015/03/30 17:49:49 29908680 r V14 [internal] Answer from cardreader:
• 2015/03/30 17:49:49 29908680 01 97 90 00
• 2015/03/30 17:49:49 29908680 r V14 [internal] write to cardreader
• 2015/03/30 17:49:49 29908680 D0 36 00 01 97
• 2015/03/30 17:49:49 29908680 r V14 [internal] Answer from cardreader:
• 2015/03/30 17:49:49 29908680 90 00 44 02 D2 7D 4C AA 3C 18 9D 1E 17 0D 35 8D
• 2015/03/30 17:49:49 29908680 13 EE 37 77 1C 93 F0 E3 D2 2E 79 35 E5 1B 56 1D
• 2015/03/30 17:49:49 29908680 FD A0 31 7E 92 33 6D F2 4D 8A 5F 46 A0 0E 11 DE
• 2015/03/30 17:49:49 29908680 C4 1F F9 7D AA BE CD CF B5 6A AD 31 C3 3C AE 0D
• 2015/03/30 17:49:49 29908680 F5 29 05 AA 97 8C 4D 0A A2 BE 0C D6 38 78 4E 9B
• 2015/03/30 17:49:49 29908680 B4 9A 76 39 D0 E1 CF EF 1A 0D 62 2D F1 70 BF 9C
• 2015/03/30 17:49:49 29908680 8B 88 AB C3 21 AC 0A CA 2E 9E 4A E2 21 08 74 42
• 2015/03/30 17:49:49 29908680 3A 37 58 7F 40 73 2F 13 A3 4B 7A 1A B0 B1 5C 8A
• 2015/03/30 17:49:49 29908680 04 2F B4 31 07 BA C5 8F 48 23 FD 11 B4 BF 3E EA
• 2015/03/30 17:49:49 29908680 15 28 78 C8 F0 B2 F9 90 00
• 2015/03/30 17:49:49 29908680 r V14 [internal] classD0 ins36: encrypted - can't parse
• 2015/03/30 17:49:49 29908680 r V14 [internal] no boxID available
• 2015/03/30 17:49:49 29908680 r V14 [internal] passed history check
• 2015/03/30 17:49:49 29908680 r TA1 = 13
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 12
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 13
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 13
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 11
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 11
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r TA1 = 11
• 2015/03/30 17:49:49 29908680 r FI = 01
• 2015/03/30 17:49:49 29908680 r V14 [internal] card system not supported

 

[Rohrby]

AW: V 14 wird nicht hell

Nein! Du musst im WI Live Log unten auf Show Settings. Dort bei Switch to Debug die 4 und die 2 anklicken und dann einen Block im Log suchen wo Decrypted Payload drüber steht. Und du musst natürlich auf einem Sky Programm sein!

 

[4gx35]

AW: V 14 wird nicht hell

logfiel=stdout ist auch falsch, welches image hast du auf der gm denn ?
payload hier

 

[sperle.m1]

AW: V 14 wird nicht hell

Ich habe openatv 4.2 auf der box

Gesendet von meinem SM-G900F mit Tapatalk

 

[4gx35]

AW: V 14 wird nicht hell

sollte logfile=/var/log/oscam.log sein
payload siehst du aber auch im livelog

 

[beauty]

AW: V 14 wird nicht hell

Wozu steckt man die neue Karte erst in die SkyBox wenn man dann sowieso ne andere Box mit Oscam verwenden will?

autospeed = 0 caid = 098Cboxid = 12345678

Steht das so zusammen in einer Zeile?
Muss so aussehen
autospeed = 0
caid = 098C
boxid = 12345678

group = 1ecmwhitelist = 098C:98,9B,97;57,91

group = 1
ecmwhitelist = 098C:98,9B,97;57,91

 

[sperle1]

AW: V 14 wird nicht hell

ich glaube der nimmt meine Karte gar nicht an
ich habe den logfile umgestellt
habe nun das bekommen

Spoiler

>> OSCam << cardserver started at Mon Mar 30 18:32:26 2015
-------------------------------------------------------------------------------
2015/03/30 18:32:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9963 (sh4-streamboard-linux-gnu-libusb)
2015/03/30 18:32:26 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1140
2015/03/30 18:32:26 0 s [Emu] OSEmu (built-in) version 706
2015/03/30 18:32:26 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/03/30 18:32:26 0 s signal handling initialized
2015/03/30 18:32:26 0 s V14 [internal] creating thread for device /dev/sci0
2015/03/30 18:32:26 4F7528 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2015/03/30 18:32:27 0 s emulator [emu] creating thread for device emulator
2015/03/30 18:32:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/30 18:32:27 0 s waiting for local card init
2015/03/30 18:32:27 4F9200 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/03/30 18:32:27 29901538 h webif: decompressed 94244 bytes back into 248472 bytes
2015/03/30 18:32:27 29901538 h HTTP Server running. ip=0.0.0.0 port=16002
2015/03/30 18:32:28 4F9200 r emulator [emu] card detected
2015/03/30 18:32:28 4F7528 r V14 [internal] card detected
2015/03/30 18:32:29 4F9200 r emulator [emu] found card system emu
2015/03/30 18:32:29 4F9200 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/30 18:32:30 4F7528 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/30 18:32:30 4F7528 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/03/30 18:32:30 4F7528 r V14 [internal] Calculated work ETU is 26.05 us reader mhz = 357
2015/03/30 18:32:31 4F7528 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
2015/03/30 18:32:32 4F7528 r V14 [internal] Card type: P1TV
2015/03/30 18:32:32 4F7528 r V14 [internal] Rom version: 20AA
2015/03/30 18:32:32 4F7528 r V14 [internal] Credit available on card: 0 euro
2015/03/30 18:32:32 4F7528 r V14 [internal] classD0 ins36: encrypted - can't parse
2015/03/30 18:32:32 4F7528 r V14 [internal] no boxID available
2015/03/30 18:32:32 4F7528 r V14 [internal] card system not supported
2015/03/30 18:32:32 4F7528 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/03/30 18:32:35 4F7528 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/03/30 18:32:35 4F7528 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/03/30 18:32:35 4F7528 r V14 [internal] Calculated work ETU is 104.20 us reader mhz = 357
2015/03/30 18:32:36 4F7528 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 3.57 (specified in reader->mhz)
2015/03/30 18:32:40 4F7528 r V14 [internal] card system not supported
2015/03/30 18:32:40 4F7528 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/30 18:32:40 4F7528 r V14 [internal] card initializing error
2015/03/30 18:32:40 0 s init for all local cards done
2015/03/30 18:32:40 4FD8D0 c plain dvbapi-client granted (lokal, au=on (1 reader))
2015/03/30 18:32:40 4FD8D0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/03/30 18:33:08 29901538 h all debug_level=2
2015/03/30 18:33:11 29901538 h all debug_level=6
2015/03/30 18:33:12 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:12 4F7528 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/03/30 18:33:13 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:13 4F7528 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/03/30 18:33:14 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:14 4F7528 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/03/30 18:33:15 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:15 4F7528 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/03/30 18:33:16 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:16 4F7528 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 3, ret = 0
2015/03/30 18:33:17 29901538 h Reader V14 restarted by WebIF from 192.168.178.20
2015/03/30 18:33:17 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:18 0 --- Skipped 1 duplicated log lines ---
2015/03/30 18:33:18 4F7528 r V14 [internal] creating thread for device /dev/sci0
2015/03/30 18:33:18 4FF9B0 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2015/03/30 18:33:19 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2015/03/30 18:33:19 4FF9B0 r V14 [internal] card detected
2015/03/30 18:33:19 4FF9B0 r V14 [internal] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2015/03/30 18:33:20 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

 

[beauty]

AW: V 14 wird nicht hell

Jetzt lese mal den payload aus im debug 6

 

[crazyfreak01]

AW: V 14 wird nicht hell

erst mal muss die V14 richtig gelesen werden. Vorher gibt's kein Payload.
oscam.server überprüfen.

 

[Rohrby]

AW: V 14 wird nicht hell

Das ist richtig das log du musst nur mal ein wenig weiter unten schauen! Wie gesagt Decrypted Payload suchen

 

[sperle1]

AW: V 14 wird nicht hell

ich bekomme immer nur diese meldung

Spoiler

• 2015/03/30 18:55:09 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:09 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:09 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9963 (sh4-streamboard-linux-gnu-libusb)
• 2015/03/30 18:55:10 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:10 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:11 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:11 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:12 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:12 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:13 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:13 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:14 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:14 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:15 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:15 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:16 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:16 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:17 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:17 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:18 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:18 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:19 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:19 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:20 0 --- Skipped 1 duplicated log lines ---
• 2015/03/30 18:55:20 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:21 0 --- Skipped 1 duplicated log lines ---
• 2015/03/30 18:55:21 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:22 4F9200 r emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
• 2015/03/30 18:55:22 298020C8 r V14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 2, ret = 1

kann da sonst nichts auslesen

 

[beauty]

AW: V 14 wird nicht hell

Schalt mal auf einen Sky Sender und schau dann mal