Umstieg von Igel auf Raspi

[Krapfl]

Hallo
Bin vom Igel auf einen Raspi 3 umgestiegen mit neuestem image und Oscam,soweit so gut.

Problem ist dass sich nicht mehr alle Clienten verbinden.
Habe teilweise die oscam backups eingespielt.
Muss man da was bestimmtes einstellen am Raspi?
Lokale Karten werden auch nur teilweise abgefragt und bearbeitet.

Steck ich wieder den Igel ein verbinden sich meine 6 clienten sofort,nehm ich den Raspi verbinden sich nur mehr 2 clienten.

Kennt jemand das Problem?
Liegt es am jesie ?

 

[pehedima]

Poste bitte alle Configs und die oscam.log von oscam Start an von der Raspel.

Hat sich die Raspel eine andere IP als der Igel?

Falls ja Portweiterleitung im Router auch prüfen.


Gesendet von meiner Handquetsche

 

[Krapfl]

portweiterleitung passt,Ip hab ich im router auf den Raspi geändert .
Igel hatte 192.168.178.51 - die hab ich dann dem Raspi vergeben und die vom Igel deaktiviert, also blieb alles gleich von daher.

welches log soll ich posten? im livelog von oscam steht zu wenig drinnen

configs wurden 1:1 vom igel übernommen, im igel läufts ja auch

(1830/157F/92/0F06000000): not found (79 ms) by HD01 - Deluxe Music HD

obwohl die 1830 als lokale ist wird es nich abgearbeitet

 

[pehedima]

Einfach die Raspel neu starten und das logfile aus dem WebIf von oscam unter 'Files' und dann 'logfile' kopieren.
Deine Configs (oscam.conf, oscam.server und oscam.user) nicht vergessen.


Gesendet von meiner Handquetsche

 

[Krapfl]

Spoiler: server

[reader]
label = HD01
description = HD01
protocol = mouse
device = /dev/HD01
autospeed = 0
caid = 1830
boxkey = A7......C
rsakey = BF35..........D5
detect = cd
mhz = 369
cardmhz = 369
group = 2
emmcache = 1,1,2,0

Spoiler: user

[account]
user = test
pwd = test
keepalive = 1
allowedprotocols = cccam
group = 1,2,3,4,5,7
cccreshare = 0
cccignorereshare = 1
cccstealth = 1

Spoiler: oscam.cfg

[global]
serverip = 192.168.178.51
logfile = /var/log/ipc/OScam.log
usrfileflag = 1
clienttimeout = 10000
fallbacktimeout = 1500
clientmaxidle = 0
nice = 0
maxlogsize = 1500
block_same_ip = 0
block_same_name = 0
lb_savepath = /var/log/lb.log
ecmfmt = c/s/l/y
resolvegethostbyname = 1
suppresscmd08 = 1

[cache]

[cs357x]
port = 20248
serverip = 192.168.178.51
suppresscmd08 = 1

[cccam]
port = xxxxx
serverip = 192.168.178.51
nodeid = ............
version = 2.0.11
stealth = 1

Spoiler: logfile

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Sep 14 23:23:17 2016
-------------------------------------------------------------------------------
2016/09/14 23:23:17 76F8B000 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (armv6l-pc-linux)
2016/09/14 23:23:17 76F8B000 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2016/09/14 23:23:17 76F8B000 s client max. idle=120 sec, debug level=0
2016/09/14 23:23:17 76F8B000 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2016/09/14 23:23:17 76F8B000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2016/09/14 23:23:17 76F8B000 s Cannot open file "/var/etc/oscam.services" (errno=2 No such file or directory)
2016/09/14 23:23:17 76F8B000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/09/14 23:23:17 76F8B000 s signal handling initialized (type=sysv)
2016/09/14 23:23:17 76F8B000 s can't open file "/var/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2016/09/14 23:23:17 76F8B000 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2016/09/14 23:23:17 76F8B000 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2016/09/14 23:23:17 76F8B000 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2016/09/14 23:23:17 76F8B000 s monitor: disabled
2016/09/14 23:23:17 76F8B000 s camd33: disabled
2016/09/14 23:23:17 76F8B000 s camd35: disabled
2016/09/14 23:23:17 76F8B000 s cs378x: disabled
2016/09/14 23:23:17 76F8B000 s newcamd: initialized (fd=7, port=xxxx, crypted)
2016/09/14 23:23:17 76F8B000 s CAID: 1830
2016/09/14 23:23:17 76F8B000 s provid #0: 003411
2016/09/14 23:23:17 76F8B000 s radegast: disabled
2016/09/14 23:23:17 76F8B000 s http thread started
2016/09/14 23:23:17 76F8B000 s loadbalancer: can't read from file /tmp/.oscam/stat
2016/09/14 23:23:17 76F8B000 s waiting for local card init
2016/09/14 23:23:17 76BB9460 h HTTP Server listening on port xxxxx
2016/09/14 23:23:18 76F8B000 s init for all local cards done
2016/09/14 23:23:18 76F8B000 s anti cascading disabled

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Thu Sep 15 12:51:37 2016
-------------------------------------------------------------------------------
2016/09/15 12:51:37 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11273 (arm-linux-gnueabihf)
2016/09/15 12:51:37 00000000 s (main) System name = Linux
2016/09/15 12:51:37 00000000 s (main) Host name = raspberrypi
2016/09/15 12:51:37 00000000 s (main) Release = 4.4.13-v7+
2016/09/15 12:51:37 00000000 s (main) Version = #894 SMP Mon Jun 13 13:13:27 BST 2016
2016/09/15 12:51:37 00000000 s (main) Machine = armv7l
2016/09/15 12:51:37 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 788
2016/09/15 12:51:37 00000000 s (config) services reloaded: 0 services freed, 32 services loaded, rejected 0
2016/09/15 12:51:37 00000000 s (config) userdb reloaded: ... accounts loaded, 0 expired, 0 disabled
2016/09/15 12:51:37 00000000 s (main) signal handling initialized
2016/09/15 12:51:37 00000000 s (config) 1020 provid's loaded
2016/09/15 12:51:37 00000000 s (config) 3587 service-id's loaded in 28 ms
2016/09/15 12:51:37 00000000 s (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
2016/09/15 12:51:37 00000000 s (config) HINT: --> use optimized lists from

Sie müssen registriert sein, um Links zu sehen.

2016/09/15 12:51:37 00000000 s (config) 155 tier-id's loaded
2016/09/15 12:51:37 00000000 s (net) cs357x: initialized (fd=5, port=20248, ip=192.168.178.51)
2016/09/15 12:51:37 00000000 s (net) cccam: initialized (fd=6, port=xxxxx, ip=192.168.178.51)
2016/09/15 12:51:37 00000000 s (reader) HD01 [mouse] creating thread for device /dev/HD01
2016/09/15 12:51:37 00000000 s (reader) SSCT [smargo] creating thread for device /dev/SSCT

2016/09/15 12:51:37 00000000 s (stat) loadbalancer: could not open /var/log/lb.log for reading (errno=2 No such file or directory)
2016/09/15 12:51:37 00000000 s (main) waiting for local card init
2016/09/15 12:51:37 1A80C3F4 h (webif) webif: decompressed 164205 bytes back into 397728 bytes
2016/09/15 12:51:37 1A80C3F4 h (webif) HTTP Server running. ip=192.168.178.51 port=xxxxx
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75125
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 1 value 03 time_us 3280
2016/09/15 12:51:37 6083B873 r (reader) SSCT [smargo] Buffers readed 0 bytes total time_us 75117
2016/09/15 12:51:37 6083B873 r (reader) SSCT [smargo] Reader initialized (device=/dev/SSCT, detect=cd, mhz=369, cardmhz=600)
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 2 value 00 time_us 15853
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 3 value 56 time_us 14228
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 4 value ff time_us 15655
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 5 value 00 time_us 13826
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 6 value 76 time_us 15304
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 7 value 7e time_us 15457
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 8 value 71 time_us 15283
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 9 value 80 time_us 18163
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 10 value 1d time_us 20787
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 11 value ff time_us 18309
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 12 value dd time_us 19458
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 13 value 8d time_us 19576
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 14 value 7d time_us 19513
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 15 value 35 time_us 19552
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 16 value f5 time_us 19612
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 17 value 73 time_us 19902
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 18 value d3 time_us 18381
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 19 value b3 time_us 21002
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 20 value fb time_us 18932
2016/09/15 12:51:37 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 21 value b5 time_us 23861
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 22 value 59 time_us 14282
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 23 value 91 time_us 19997
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 24 value 1d time_us 18283
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 25 value 3d time_us 19937
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 26 value 93 time_us 19881
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Flush readed byte Nr 27 value 79 time_us 18438
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Buffers readed 27 bytes total time_us 553995
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=369, cardmhz=369)
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] card detected
2016/09/15 12:51:38 6083B873 r (reader) SSCT [smargo] card detected
2016/09/15 12:51:38 58DB9736 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75141
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] ATR: xxxxxxxxxxxx
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] Setting baudrate to 115312 bps
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] Calculated work ETU is 8,67 us reader mhz = 369
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] Buffers readed 0 bytes total time_us 75092
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3,69 MHz (specified in reader->mhz)
2016/09/15 12:51:40 58DB9736 r (reader) HD01 [mouse] Card responded ok for ifsd request of 251
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [mouse] detect native nagra card
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [mouse] ready for requests
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [mouse] found card system nagra
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] ROM: D N A S P 1 4 2
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] REV: R e v G C 6
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] SER: ############
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] CAID: 1830
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] Prv.ID: 00 00 00 00
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] IRD ID: ############
2016/09/15 12:51:41 58DB9736 r (reader) HD01 [nagra] active to: 2016/11/06 11:59
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] -----------------------------------------
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] |id |tier |valid from |valid to |
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] +----+--------+------------+------------+
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] |8011|0BEA |2011/01/21 |2017/06/22 |
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] |8011|0064 |2010/01/20 |2011/01/21 |
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2016/09/15 12:51:42 58DB9736 r (reader) HD01 [nagra] -----------------------------------------
2016/09/15 12:51:51 6083B873 r (reader) SSCT [smargo] ATR: xxxxxxxxxx
2016/09/15 12:51:51 6083B873 r (reader) SSCT [smargo] Init card protocol T0, FI=1, F=372, D=12, N=0
2016/09/15 12:51:51 6083B873 r (reader) SSCT [smargo] Calculated work ETU is 8,40 us reader mhz = 369
2016/09/15 12:51:51 6083B873 r (reader) SSCT [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3,69 MHz (specified in reader->mhz)
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] using ecm #710 for long viaccess ecm
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] providers: 2 (FFF8F0,043800)
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] Maturity level [7]= older than 7 years
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] ready for requests
2016/09/15 12:51:52 6083B873 r (reader) SSCT [smargo] found card system viaccess
2016/09/15 12:51:52 6083B873 r (reader) SSCT [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2016/09/15 12:51:52 6083B873 r (reader) SSCT [viaccess] card detected
2016/09/15 12:51:53 6083B873 r (reader) SSCT [viaccess] serial: ##########
2016/09/15 12:51:53 6083B873 r (reader) SSCT [viaccess] provider: 1, id: ######################, sa: ########, geo: empty
2016/09/15 12:51:53 6083B873 r (reader) SSCT [viaccess] provider: 2, id: ######################, sa: ########, geo: FF FF FF FF
2016/09/15 12:51:53 6083B873 r (reader) SSCT [viaccess] class: 01, expiry date: 2016/09/06 - 2017/09/05
2016/09/15 12:51:54 00000000 s (main) init for all local cards done

 

[Osprey]

Lösche in der oscam.conf bei cccam die nodeid, serverip und stealth. Außerdem wäre cccamversion = 2.3.0 besser.

 

[dodo83]

update mal die OScam erstmal

 

[Krapfl]

Okay hab mal die 3 sachen gelöscht und neustart gemacht,schaun obs geht.
die Nodeid id kommt immer wieder neu,geht nicht zu löschen.

@ dodo83 es ist bereits die aktuellste drauf OSCam: 1.20-unstable_svn Build: r11273

 

[pehedima]

Die Node-ID wird von oscam immer wieder automatisch angelegt.
Die muss in einer zusammenhängenden Config immer eindeutig sein.
Daher der Hinweis mit dem Löschen.

Poste bitte die oscam.log vom oscam start an bis zum fehlerhaften Clientzugriff.