B
bluedark
Guest
Nabend,
ich bin gerade dabei den Umstieg von Fritte auf Raspberry Pi B+ durchzuführen.
Ich habe hier im Forum schon viel gelesen und habe alles nach der Beschreibung von al-x83(Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IPC )durchgeführt.
Ich habe den Raspberry Pi B+ und habe 4 xeasymouse 2 (2x V14 und 2xHD01)direkt an den Raspi angeschlossen.
Die Portfreigabe in der Fritzbox für den Raspi habe ich gemacht.Bild bekomme ich aber nicht.
Was mache ich falsch ?
Oscam Log
osam config
oscam user
oscam server
Danke für die Hilfe
[h=2][/h][h=2][/h]
ich bin gerade dabei den Umstieg von Fritte auf Raspberry Pi B+ durchzuführen.
Ich habe hier im Forum schon viel gelesen und habe alles nach der Beschreibung von al-x83(Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IPC )durchgeführt.
Ich habe den Raspberry Pi B+ und habe 4 xeasymouse 2 (2x V14 und 2xHD01)direkt an den Raspi angeschlossen.
Die Portfreigabe in der Fritzbox für den Raspi habe ich gemacht.Bild bekomme ich aber nicht.
Was mache ich falsch ?
Oscam Log
2014/10/13 20:41:13 B6FBF000 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (armv6l-pc-linux)
2014/10/13 20:41:13 B6FBF000 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2014/10/13 20:41:13 B6FBF000 s client max. idle=120 sec, debug level=0
2014/10/13 20:41:13 B6FBF000 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2014/10/13 20:41:13 B6FBF000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/10/13 20:41:13 B6FBF000 s services reloaded: 0 services freed, 7 services loaded, rejected 0
2014/10/13 20:41:13 B6FBF000 s userdb reloaded: 42 accounts loaded, 0 expired, 0 disabled
2014/10/13 20:41:13 B6FBF000 s signal handling initialized (type=sysv)
2014/10/13 20:41:13 B6FBF000 s 170 service-id's loaded in 3ms
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2014/10/13 20:41:13 B6FBF000 s monitor: disabled
2014/10/13 20:41:13 B6FBF000 s camd33: disabled
2014/10/13 20:41:13 B6FBF000 s camd35: disabled
2014/10/13 20:41:13 B6FBF000 s cs378x: disabled
2014/10/13 20:41:13 B6FBF000 s newcamd: disabled
2014/10/13 20:41:13 B6FBF000 s radegast: disabled
2014/10/13 20:41:13 B6FBF000 s http thread started
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB0
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB1
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB2
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB3
2014/10/13 20:41:13 B6FBF000 s waiting for local card init
2014/10/13 20:41:13 B6C13470 h HTTP Server listening on port 16002
2014/10/13 20:41:13 B6C07470 r reader thread started (thread=B6C07470, label=sky1, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/10/13 20:41:13 B5407470 r reader thread started (thread=B5407470, label=hdplus2, device=/dev/ttyUSB3, detect=cd, mhz=368, cardmhz=368)
2014/10/13 20:41:13 B6407470 r reader thread started (thread=B6407470, label=sky2, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/10/13 20:41:13 B5C07470 r reader thread started (thread=B5C07470, label=hdplus1, device=/dev/ttyUSB2, detect=cd, mhz=368, cardmhz=368)
2014/10/13 20:41:15 B6407470 r sky2 card detected
2014/10/13 20:41:15 B6C07470 r sky1 card detected
2014/10/13 20:41:15 B5C07470 r hdplus1 card detected
2014/10/13 20:41:15 B5407470 r hdplus2 card detected
2014/10/13 20:41:13 B6FBF000 s version=1.10rc-svn, build #6089, system=armv6l-pc-linux, nice=0
2014/10/13 20:41:13 B6FBF000 s client max. idle=120 sec, debug level=0
2014/10/13 20:41:13 B6FBF000 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2014/10/13 20:41:13 B6FBF000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2014/10/13 20:41:13 B6FBF000 s services reloaded: 0 services freed, 7 services loaded, rejected 0
2014/10/13 20:41:13 B6FBF000 s userdb reloaded: 42 accounts loaded, 0 expired, 0 disabled
2014/10/13 20:41:13 B6FBF000 s signal handling initialized (type=sysv)
2014/10/13 20:41:13 B6FBF000 s 170 service-id's loaded in 3ms
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
2014/10/13 20:41:13 B6FBF000 s can't open file "/var/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2014/10/13 20:41:13 B6FBF000 s monitor: disabled
2014/10/13 20:41:13 B6FBF000 s camd33: disabled
2014/10/13 20:41:13 B6FBF000 s camd35: disabled
2014/10/13 20:41:13 B6FBF000 s cs378x: disabled
2014/10/13 20:41:13 B6FBF000 s newcamd: disabled
2014/10/13 20:41:13 B6FBF000 s radegast: disabled
2014/10/13 20:41:13 B6FBF000 s http thread started
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB0
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB1
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB2
2014/10/13 20:41:13 B6FBF000 s creating thread for device /dev/ttyUSB3
2014/10/13 20:41:13 B6FBF000 s waiting for local card init
2014/10/13 20:41:13 B6C13470 h HTTP Server listening on port 16002
2014/10/13 20:41:13 B6C07470 r reader thread started (thread=B6C07470, label=sky1, device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2014/10/13 20:41:13 B5407470 r reader thread started (thread=B5407470, label=hdplus2, device=/dev/ttyUSB3, detect=cd, mhz=368, cardmhz=368)
2014/10/13 20:41:13 B6407470 r reader thread started (thread=B6407470, label=sky2, device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2014/10/13 20:41:13 B5C07470 r reader thread started (thread=B5C07470, label=hdplus1, device=/dev/ttyUSB2, detect=cd, mhz=368, cardmhz=368)
2014/10/13 20:41:15 B6407470 r sky2 card detected
2014/10/13 20:41:15 B6C07470 r sky1 card detected
2014/10/13 20:41:15 B5C07470 r hdplus1 card detected
2014/10/13 20:41:15 B5407470 r hdplus2 card detected
osam config
# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #6089
# Read more:
[global]
logfile = /var/log/ipc/OScam.log
nice = 0
maxlogsize = 2480
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath =
[webif]
httpport = 16002
httpuser = xxxxxxx
httppwd = xxxxxxx
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
# Read more:
Sie müssen registriert sein, um Links zu sehen.
[global]
logfile = /var/log/ipc/OScam.log
nice = 0
maxlogsize = 2480
saveinithistory = 1
lb_mode = 1
lb_save = 100
lb_savepath =
[webif]
httpport = 16002
httpuser = xxxxxxx
httppwd = xxxxxxx
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
oscam user
pwd = xxxxxxx
uniq = 3
au = sky1,sky2
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxx
pwd = xxxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxx
pwd = xxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxxxxxxx
pwd = xxxxxxxxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
uniq = 3
au = sky1,sky2
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxx
pwd = xxxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxx
pwd = xxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
[account]
user = xxxxxxxxxxxxxxxx
pwd = xxxxxxxxxxxxxxxx
uniq = 3
au = 0
group = 1,2,3,4
cccmaxhops = 1
cccreshare = 0
oscam server
[reader]
label = sky1
protocol = mouse
device = /dev/ttyUSB0
services = !hd+v14
autospeed = 0
caid = 098C
boxid = xxxxxxxxxxxxxx
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-g = 1
lb_weight = 100
ndsversion = 2
[reader]
label = sky2
protocol = mouse
device = /dev/ttyUSB1
services = !hd+v14
autospeed = 0
caid = 098C
boxid = xxxxxxxxxxxxx
ins7e11 = 15
detect = cd
mhz = 600
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-g = 1
lb_weight = 100
ndsversion = 2
[reader]
label = hdplus1
protocol = mouse
device = /dev/ttyUSB2
services = hdplus
caid = 1830
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 3
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
[reader]
label = hdplus2
protocol = mouse
device = /dev/ttyUSB3
services = hdplus
caid = 1830
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 4
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
label = sky1
protocol = mouse
device = /dev/ttyUSB0
services = !hd+v14
autospeed = 0
caid = 098C
boxid = xxxxxxxxxxxxxx
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-g = 1
lb_weight = 100
ndsversion = 2
[reader]
label = sky2
protocol = mouse
device = /dev/ttyUSB1
services = !hd+v14
autospeed = 0
caid = 098C
boxid = xxxxxxxxxxxxx
ins7e11 = 15
detect = cd
mhz = 600
group = 2
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-g = 1
lb_weight = 100
ndsversion = 2
[reader]
label = hdplus1
protocol = mouse
device = /dev/ttyUSB2
services = hdplus
caid = 1830
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 3
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
[reader]
label = hdplus2
protocol = mouse
device = /dev/ttyUSB3
services = hdplus
caid = 1830
boxkey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
rsakey = xxxxxxxxxxxxxxxxxxxxxxxxxxxxx
ecmwhitelist = 92
detect = cd
mhz = 368
cardmhz = 368
group = 4
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 100
Danke für die Hilfe
[h=2][/h][h=2][/h]