UM 02 ..........................debian leny oscam

[lunamila]

ich versuche schon lange die carte ainzubinden haber klapt nicht.......!
das ist mein log.....
>> OSCam << cardserver started at Fri Sep 24 23:21:40 2010
-------------------------------------------------------------------------------
2010/09/24 23:21:40 3585 s version=0.99.4svn, build #1736, system=i686-pc-linux, nice=0
2010/09/24 23:21:40 3585 s max. clients=509, client max. idle=120 sec
2010/09/24 23:21:40 3585 s max. logsize=10240 Kb
2010/09/24 23:21:40 3585 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2010/09/24 23:21:40 3585 s shared memory initialized (size=4175644, id=294912)
2010/09/24 23:21:40 3585 s auth size=4752
2010/09/24 23:21:40 3585 s services reloaded: 0 services freed, 13 services loaded
2010/09/24 23:21:40 3585 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/09/24 23:21:40 3585 s signal handling initialized (type=sysv)
2010/09/24 23:21:40 3585 s can't open file "/var/etc/oscam.srvid" (err=2), no service-id's loaded
2010/09/24 23:21:40 3586 s monitor: disabled
2010/09/24 23:21:40 3586 s camd 3.3x: disabled
2010/09/24 23:21:40 3586 s camd 3.5x: disabled
2010/09/24 23:21:40 3586 s cs378x: disabled
2010/09/24 23:21:40 3586 s newcamd: initialized (fd=6, port=34500, ip=127.0.0.1, crypted)
2010/09/24 23:21:40 3586 s CAID: 1838
2010/09/24 23:21:40 3586 s provid #0: 000401
2010/09/24 23:21:40 3586 s cccam: disabled
2010/09/24 23:21:40 3586 s radegast: disabled
2010/09/24 23:21:40 3586 s resolver thread started
2010/09/24 23:21:40 3586 s logger started (pid=3589)
2010/09/24 23:21:40 3586 s resolver started (pid=3590, delay=30 sec)
2010/09/24 23:21:40 3586 s reader started (pid=3591, device=/dev/ttyS0, detect=cd, mhz=500, cardmhz=357)
2010/09/24 23:21:40 3586 s anti cascading disabled
2010/09/24 23:21:41 3586 s client(1) connect from 127.0.0.1 (pid=3592, pipfd=11)
2010/09/24 23:21:41 3592 c01 encrypted newcamd:34500-client 127.0.0.1 granted (cccam, au=um02)
2010/09/24 23:21:41 3592 c01 user cccam authenticated successfully (using client 4343)
2010/09/24 23:21:41 3592 c01 AU wont be used on this port -> disable AU
und das kommt bei cccaminfo...........!
96.3% 127.0.0.1:34500 <> 1 7 00d 00:00:35 newcamd 1 - - 1838 : 401
ICH BENUTZE EINEN pfonix 3.58 MHZ
KAN VILEICHT JEMAND HELFEN........:emoticon-0184-tmi::emoticon-0184-tmi::emoticon-0184-tmi:
hir meine configs...
# OSCam Konfiguration IPC - oscam.server
[reader]
label = UM02
protocol = mouse
detect = CD
smargopatch = 1
group = 1
emmcache = 1,3,2
caid = 1838
mhz = 500
cardmhz = 357
device = /dev/ttyS0
n3_rsakey = B###############FF
n3_boxkey = A############7C

# OSCam Konfiguration IPC - oscam.user
[account]
user = cccam
pwd = cccam
caid = 1838
ident = 1838:000401,000000,001103
hostname = localhost
uniq = 1
group = 1
au = UM02

 

[d4m1]

AW: UM 02 ..........................debian leny oscam

Hast du auch einen Log, wo die Karte erkannt wird bzw. einen Fehler ausspuckt, weil sie nicht erkannt wird?

In deinem angehängten Log scheint es so, als ob die Karte nicht im Phönix war.

 

[lunamila]

AW: UM 02 ..........................debian leny oscam

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

das ist das einzige was bein log raus komt....!:emoticon-0184-tmi:
haber wiso wird sie nicht erkant.....?
hat das vileicht mit dem pfonix zutun.?
oder habe ich die configs nicht richtig...?
vileicht kanst nen tip gehben....!!!!!!!
danke..............:emoticon-0137-clapp

 

[Mogelhieb]

AW: UM 02 ..........................debian leny oscam

Kann es sein, dass Du Deine Karte massiv übertaktest? Soweit ich gelesen habe, benötig die UM02:

mhz = 368

Bei Dir ist der RSA und Box Key voll ausgeschrieben? Also ohne die ganzen Rauten dazwischen?

Lass den Eintag: hostname = localhost mal bitte komplett weg.

 

[lunamila]

AW: UM 02 ..........................debian leny oscam

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

halo...
ya die sind voll ausgeshieben...!
hostname = localhost habe ich jetz weg.
jetz im log:
2010/09/25 10:13:13 14364 r01 Cannot open device: /dev/ttyS0......???

 

[lunamila]

AW: UM 02 ..........................debian leny oscam

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

newcs log........!
[ 09:39:40 ] [ Box detect ] Box type 1 (General Boxtype - Generic)
[ 09:39:40 ] [ Config ] Option <blockc0> for device 0 (MCT) not present, defaulting to NO
[ 09:39:40 ] [ Config ] Option <sid> for device 0 (MCT) not present, no static sids added to filter
[ 09:39:40 ] [ Config ] Option <protectedsid> for device 0 (MCT) not present, no PIN Code will be sent
[ 09:39:40 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 09:39:40 ] [ Newcamd ] Server name : newcs
[ 09:39:40 ] [ Newcamd ] Des key : 0102030405060708091011121314
[ 09:39:40 ] [ Config ] Option <readers> not present for User: cccam, NO reader control enabled
[ 09:39:40 ] [ Config ] Option <readers> not present for User: prueva, NO reader control enabled
[ 09:39:40 ] [ Newcamd ] User 2: cccam, Pass: cccam, Host , Port: 0, Au: Off, Spider allowed: Yes, Sidoverride: Yes, level: 0
[ 09:39:40 ] [ Newcamd ] User 3: prueva, Pass: prueva3, Host , Port: 0, Au: On, Spider allowed: Yes, Sidoverride: Yes, level: 0
[ 09:39:40 ] [ httpd ] httpd-user: #####, password: ######, accesslevel: admin
[ 09:39:40 ] [ EMM Cache ] Initialising dynamic Cache
[ 09:39:40 ] [ ECM Cache ] Initialising dynamic Cache
[ 09:39:40 ] Calibrating delay loops
[ 09:39:40 ] usleep(5) takes: 0 s 5 us
[ 09:39:40 ] usleep(10) takes: 0 s 11 us
[ 09:39:40 ] usleep(100) takes: 0 s 101 us
[ 09:39:40 ] usleep(500) takes: 0 s 501 us
[ 09:39:40 ] Allocation memory for 200 regular users
[ 09:39:40 ] [ Loader ] Starting Telnet on port 0
[ 09:39:40 ] [ SockSrv ] Server thread started
[ 09:39:40 ] [ Loader ] Started HTTP-server on port: 8080
[ 09:39:40 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:39:40 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:39:40 ] [ Phoenix ] Setting Parity to: ODD
[ 09:39:40 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:39:40 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:39:41 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=27 timeout=5300ms)
[ 09:39:43 ] [ ATR ] T=1 1etu=8.96us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 09:39:43 ] [ ATR ] Historical bytes: D N A S P 1 4 2 R e v G C 2
[ 09:39:43 ] [ Loader ] Init Nagra card
[ 09:39:43 ] [ Phoenix ] Setting Parity to: ODD
[ 09:39:43 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:39:43 ] [ Phoenix ] Setting Baud to standard 115200
[ 09:39:43 ] NAGRA: Rom rev: 142
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=5, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=5 timeout=1777ms)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=5 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] -> card
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:43 ] [ Nagra ] <- card
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] Nagra 2 Card detected
[ 09:39:43 ] [ Nagra ] -> card
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:43 ] [ Nagra ] <- card
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] Serial Number: 4A 13 AA C9
[ 09:39:43 ] [ KeymaN ] Adding key 0000004a13aac9 type 0 on Provider 000000 for caid 1800 ID=0
[ 09:39:43 ] [ Nagra ] -> card
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:43 ] [ Nagra ] <- card
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] -> card
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=13, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=13 timeout=1777ms)
[ 09:39:43 ] [ Nagra ] <- card
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=63 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] IRD. Number: FF FF FF FF
[ 09:39:43 ] [ Nagra ] New rom revision, resetting prov ids.
[ 09:39:43 ] [ KeymaN ] Adding key 0000004a13aac9 type 1 on Provider 000000 for caid 1801 ID=0
[ 09:39:43 ] [ KeymaN ] Adding key 0000004a13aac9 type 1 on Provider 000000 for caid 1801 ID=0
[ 09:39:43 ] [ Nagra ] -> card
[ 09:39:43 ] [ Serial ] Write byte on fd 6 (len=13, delay=99us)
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=13 timeout=1777ms)
[ 09:39:43 ] [ Nagra ] <- card
[ 09:39:43 ] [ Serial ] Read on fd 6 (len=63 timeout=1677ms)
[ 09:39:43 ] [ Nagra ] DT$08 data not defined.
[ 09:39:43 ] [ Nagra ] i/o error ?
[ 09:39:43 ] [ 1800 ] Init took: 0.599287
[ 09:39:43 ] [ Loader ] Card 1801 on port /dev/ttyS0 failed
[ 09:39:43 ] [ Card queue /dev/ttyS0 ] Starting...
[ 09:39:43 ] [ Loader ] Starting Newcamd Server on port 34500
[ 09:39:43 ] [ Newcamd ] Newcamd thread Server started on port 34500
[ 09:39:43 ] bind: error! 98: Address already in use
[ 09:39:43 ] [ Newcamd ] Stopping port 34500
[ 09:39:43 ] [ NewCS ] Ready to GO!
[ 09:39:44 ] [ Loader ] Reinit card with caid 1801
[ 09:39:44 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:39:44 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:39:44 ] [ Phoenix ] Setting Parity to: ODD
[ 09:39:44 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:39:44 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:39:44 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:39:45 ] [ Serial ] Read on fd 6 (len=27 timeout=5300ms)
[ 09:39:45 ] [ ATR ] T=1 1etu=8.96us Guardtime:11etu CWT:139etu BWT:15371etu WWT:153600etu
[ 09:39:45 ] [ ATR ] Historical bytes: D N A S P 1 4 2 R e v G C 2
[ 09:39:45 ] [ Loader ] Init Nagra card
[ 09:39:45 ] [ Phoenix ] Setting Parity to: ODD
[ 09:39:45 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:39:45 ] [ Phoenix ] Setting Baud to standard 115200
[ 09:39:46 ] NAGRA: Rom rev: 142
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=5, delay=99us)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=5 timeout=1777ms)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=5 timeout=1677ms)
[ 09:39:46 ] [ Nagra ] -> card
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:46 ] [ Nagra ] <- card
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:46 ] [ Nagra ] Nagra 2 Card detected
[ 09:39:46 ] [ Nagra ] -> card
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:46 ] [ Nagra ] <- card
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:46 ] [ Nagra ] Serial Number: 4A 13 AA C9
[ 09:39:46 ] [ KeymaN ] Adding key 0000004a13aac9 type 0 on Provider 000000 for caid 1800 ID=0
[ 09:39:46 ] [ Nagra ] -> card
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=12, delay=99us)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1777ms)
[ 09:39:46 ] [ Nagra ] <- card
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=12 timeout=1677ms)
[ 09:39:46 ] [ Nagra ] -> card
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=13, delay=99us)
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=13 timeout=1777ms)
[ 09:39:46 ] [ Nagra ] <- card
[ 09:39:46 ] [ Serial ] Read on fd 6 (len=63 timeout=1677ms)
[ 09:39:46 ] [ Nagra ] IRD. Number: FF FF FF FF
[ 09:39:46 ] [ Nagra ] New rom revision, resetting prov ids.
[ 09:39:46 ] [ KeymaN ] Adding key 0000004a13aac9 type 1 on Provider 000000 for caid 1801 ID=0
[ 09:39:46 ] [ KeymaN ] Adding key 0000004a13aac9 type 1 on Provider 000000 for caid 1801 ID=0
[ 09:39:46 ] [ Nagra ] -> card
[ 09:39:46 ] [ Serial ] Write byte on fd 6 (len=13, delay=99us)

 

[arseyn]

AW: UM 02 ..........................debian leny oscam

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Du brauchst bei nem Phoenix keinen Smargopatch!
Nimm das mal raus und stell den Phoenix auf 3,58 Mhz.

Dann versuch es mal so (rsa- und boxkey muss noch vervollständigt werden!!!):

oscam.server

Du musst dich Anmelden oder Registrieren um den Inhalt der Codes zu sehen!

Probier mal ob die Karte so erkannt wird.