Sky S02 mit Oscam

[camelrider]

Hi

Ich habe heute meine Zweitkarte für Sky (S02 - alle Pakete + ORF) bekommen und hab mich gleich mal fröhlich ans Werk gemacht

Folgende Einstellungen hab ich verwendet:

oscam.conf

Spoiler

[global]
logfile = /var/cache/oscam.log
disableuserfile = 0
clienttimeout = 900000 # (für Kartenaktivierung evtl. Änderung des Wertes nötig)
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1


[cccam]
port = 34001
reshare = 1
forward_origin_card = 1
version = 2.0.3
stealth = 1
keepconnected = 1


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox # (Änderung des Wertes bei anderen Boxen evtl. möglich)
user = local
pmt_mode = 0
decodeforever = 1


[webif]
httpport = 17000
httpuser = xx
httppwd = xx
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 # (bei Nutzung einer dyndns 0.0.0.0
httpdyndns = durch Eingabe einer eigenen DYNDNS kann auch von Unterwegs in Webif


[cache]
Delay = 120

oscam.server

Spoiler

[reader]
Label = Sky S02(Kartenschacht unten)
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833
services = Sky
boxkey = 12345678
detect = CD
mhz = 600 #Karte ist mit 600 MHz getaktet
cardmhz = 600 #Karte läuft mit 600 MHz
group = 1 #Karte befindet sich in der Gruppe 1
emmcache = 1,1,2

oscam.user

Spoiler

[account]
user = local
group = 1,2,3
au = 1

Die Config basiert auf den Beispiel Configs von hier - nur leider will Oscam (r9573) nicht so recht

Log aus Oscam:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Mar 25 22:03:52 2014
-------------------------------------------------------------------------------
2014/03/25 22:03:52 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9573 (mipsel-unknown-linux-gnu)
2014/03/25 22:03:52 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1216
2014/03/25 22:03:52 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/03/25 22:03:52 0 s signal handling initialized
2014/03/25 22:03:52 0 s cccam: initialized (fd=8, port=34001)
2014/03/25 22:03:52 0 s Sky_S02(Kartenschacht_unten) [internal] creating thread for device /dev/sci0
2014/03/25 22:03:52 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/03/25 22:03:52 0 s waiting for local card init
2014/03/25 22:03:52 953660 r Sky_S02(Kartenschacht_unten) [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2014/03/25 22:03:52 94C6A8 h webif: decompressed 143173 bytes back into 351040 bytes
2014/03/25 22:03:52 94C6A8 h HTTP Server running. ip=0.0.0.0 port=17000
2014/03/25 22:03:54 0 s init for all local cards done
2014/03/25 22:03:54 0 s anti cascading disabled
2014/03/25 22:03:54 956308 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/03/25 22:03:54 956308 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
2014/03/25 22:03:57 956308 c [DVBAPI] Receiver sends PMT command 3 for channel 0011
2014/03/25 22:03:57 956308 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/03/25 22:03:57 956308 c [ADD PID 0] CAID: 1702 ECM_PID: 1700 PROVID: 000000
2014/03/25 22:03:57 956308 c [ADD PID 1] CAID: 1833 ECM_PID: 1800 PROVID: 000000
2014/03/25 22:03:57 956308 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B00 PROVID: 000000
2014/03/25 22:03:57 956308 c [ADD PID 3] CAID: 09AF ECM_PID: 1F00 PROVID: 000000
2014/03/25 22:03:57 956308 c [ADD PID 4] CAID: 098C ECM_PID: 1A00 PROVID: 000000
2014/03/25 22:03:57 956308 c Found 5 ECMpids and 3 STREAMpids in PMT
2014/03/25 22:03:57 956308 c [DVBAPI] Receiver wants to demux srvid 0011 on adapter 0000 camask 0008 index 0003 pmtpid 0064
2014/03/25 22:03:57 956308 c New program number: 0011 (1702:0011 unknown) [pmt_list_management 3]
2014/03/25 22:03:57 956308 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/03/25 22:03:57 956308 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/03/25 22:03:57 956308 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/03/25 22:03:58 956308 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/03/25 22:03:58 956308 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/03/25 22:03:58 956308 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

Im WebIf bekomme ich den Status "OFF (No entitlements)"


Irgendeine Idee was ich falsch gemacht hab?

lg Camelrider

​

 

[4gx35]

AW: Sky S02 mit Oscam

falsch ist einfach, dass du nicht gesagt hast, welchen receiver du hast,
Link ist nicht mehr aktiv.

 

[bombadil]

AW: Sky S02 mit Oscam

Hi,

versuch das bitte mit den Einstellungen im Reader

mhz = 1
cardmhz = 2700

Grüße
Bombadil

 

[camelrider]

AW: Sky S02 mit Oscam

Hi

Receiver ist eine Dreambox 8000

Ich hab die Mhz mal wie vorgeschlagen in der Config angepasst und bekomme jetzt folgendes log:

Spoiler

• 2014/03/25 22:21:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9573 (mipsel-unknown-linux-gnu)
• 2014/03/25 22:21:08 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2784
• 2014/03/25 22:21:08 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
• 2014/03/25 22:21:08 0 s signal handling initialized
• 2014/03/25 22:21:08 0 s cccam: initialized (fd=8, port=34001)
• 2014/03/25 22:21:08 0 s Sky_S02(Kartenschacht_unten) [internal] creating thread for device /dev/sci0
• 2014/03/25 22:21:08 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/03/25 22:21:08 0 s waiting for local card init
• 2014/03/25 22:21:08 77900588 r Sky_S02(Kartenschacht_unten) [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
• 2014/03/25 22:21:08 94C6A8 h webif: decompressed 143173 bytes back into 351040 bytes
• 2014/03/25 22:21:08 94C6A8 h HTTP Server running. ip=0.0.0.0 port=17000
• 2014/03/25 22:21:10 0 s init for all local cards done
• 2014/03/25 22:21:10 0 s anti cascading disabled
• 2014/03/25 22:21:10 77902438 c plain dvbapi-client granted (local, au=auto (1 reader))
• 2014/03/25 22:21:10 77902438 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
• 2014/03/25 22:21:13 77902438 c [DVBAPI] Receiver sends PMT command 3 for channel 445D
• 2014/03/25 22:21:13 77902438 c [DVBAPI] Receiver wants to demux srvid 445D on adapter 0000 camask 0008 index 0003 pmtpid 0061
• 2014/03/25 22:21:13 77902438 c Found 0 ECMpids and 5 STREAMpids in PMT
• 2014/03/25 22:21:13 77902438 c [DVBAPI] Receiver wants to demux srvid 445D on adapter 0000 camask 0008 index 0003 pmtpid 0061
• 2014/03/25 22:21:13 77902438 c New program number: 445D (FFFE:445D unknown) [pmt_list_management 3]
• 2014/03/25 22:21:43 77902438 c [DVBAPI] Receiver sends PMT command 3 for channel 132F
• 2014/03/25 22:21:43 77902438 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0008 index 0003 pmtpid 006B
• 2014/03/25 22:21:43 77902438 c [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 7] CAID: 0D98 ECM_PID: 0110 PROVID: 000000
• 2014/03/25 22:21:43 77902438 c [ADD PID 8] CAID: 0650 ECM_PID: 007A PROVID: 000000
• 2014/03/25 22:21:43 77902438 c Found 9 ECMpids and 7 STREAMpids in PMT
• 2014/03/25 22:21:43 77902438 c [DVBAPI] Receiver wants to demux srvid 132F on adapter 0000 camask 0008 index 0003 pmtpid 006B
• 2014/03/25 22:21:43 77902438 c New program number: 132F (0D05:132F unknown) [pmt_list_management 3]
• 2014/03/25 22:21:43 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:43 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:44 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:44 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:44 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:45 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:45 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:45 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:45 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:46 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:46 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:46 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:47 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:48 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:49 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:50 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:50 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:50 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:51 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:51 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:51 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:52 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:52 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:53 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:53 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:53 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:54 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:54 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:54 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
• 2014/03/25 22:21:54 77902438 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/03/25 22:21:55 77902438 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!

-> es hat sich leider nicht wirklich was getan ...

Ich hab mir sicherheitshalber auch nochmal das Freischaltsignal zuschicken lassen - ohne Erfolg

lg Camelrider

 

[4gx35]

AW: Sky S02 mit Oscam

die karte wird nicht gelesen, in meiner anleitung stehen aber alternative mhz für s02

 

[DreamHD]

AW: Sky S02 mit Oscam

Spoiler

Hi,

versuch das bitte mit den Einstellungen im Reader

mhz = 1
cardmhz = 2700

Grüße
Bombadil

Sollte das nicht -1 sein für Auto?

Bzgl dem Reader:

caid = 1702,1833

Das hat bei mir nicht funktioniert. Nur 1702... und dann vom DVB-API einen BTunnel angeben der auf 1833 auf 1702 umleitet (1833.FFFF:1702).

 

[bombadil]

AW: Sky S02 mit Oscam

Moin,

ab Rev 9099 sollte es so sein, wie ich es beschrieben habe. Ab Rev. 8940 so wie du es sagst. Er kann ja mal beides Austesten.

Grüße
Bombadil

 

[DreamHD]

AW: Sky S02 mit Oscam

Und wenn es dann noch immer nicht funktioniert würde ich es mit:
mhz vollständig löschen und dann mit
autospeed = 1
cardmhz = 2700
testen.

 

[lampe06]

AW: Sky S02 mit Oscam

[reader]
label = s02intern
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1

versuche mal die die sollte gehen

 

[camelrider]

AW: Sky S02 mit Oscam

So folgende Varianten hab ich ausprobiert:

autospeed = 1
mhz=2700
cardmhz= -1

oder

autospeed = 0
mhz=2700
cardmhz= -1

oder

autospeed = 1
mhz=2100
cardmhz=700


oder

autospeed = 1
mhz=2700
cardmhz= -1

oder

cardmhz= 2700
mhz=1

oder

cardmhz=2100
mhz=700
autospeed=0


alle Varianten mit dem gleichem Erfolg

Danach hab ich die caid=1702 gesetzt (ohne betatunnel - um diesen Fehler auszuschließen)
mit
cardmhz= 2700
mhz=1

bzw.

cardmhz= 2700
mhz=-1

Ohne irgendeinen Erfolg ...

lg Camelrider

 

[lampe06]

AW: Sky S02 mit Oscam

post 9 bitte mal nehmen

 

[camelrider]

AW: Sky S02 mit Oscam

@Lampe06

auch deine Config ändert nicht wirklich was - siehe log

Spoiler

• 2014/03/25 22:51:21 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9573 (mipsel-unknown-linux-gnu)
• 2014/03/25 22:51:21 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5582
• 2014/03/25 22:51:21 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
• 2014/03/25 22:51:21 0 s signal handling initialized
• 2014/03/25 22:51:21 0 s cccam: initialized (fd=8, port=34001)
• 2014/03/25 22:51:21 0 s s02intern [internal] creating thread for device /dev/sci0
• 2014/03/25 22:51:21 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/03/25 22:51:21 0 s waiting for local card init
• 2014/03/25 22:51:21 953660 r s02intern [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
• 2014/03/25 22:51:21 94C6A8 h webif: decompressed 143173 bytes back into 351040 bytes
• 2014/03/25 22:51:21 94C6A8 h HTTP Server running. ip=0.0.0.0 port=17000
• 2014/03/25 22:51:22 0 s init for all local cards done
• 2014/03/25 22:51:22 0 s anti cascading disabled
• 2014/03/25 22:51:22 955F30 c plain dvbapi-client granted (local, au=auto (1 reader))
• 2014/03/25 22:51:22 955F30 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0
• 2014/03/25 22:51:26 955F30 c [DVBAPI] Receiver sends PMT command 3 for channel 445E
• 2014/03/25 22:51:26 955F30 c [DVBAPI] Receiver wants to demux srvid 445E on adapter 0000 camask 0008 index 0003 pmtpid 0062
• 2014/03/25 22:51:26 955F30 c Found 0 ECMpids and 4 STREAMpids in PMT
• 2014/03/25 22:51:26 955F30 c [DVBAPI] Receiver wants to demux srvid 445E on adapter 0000 camask 0008 index 0003 pmtpid 0062
• 2014/03/25 22:51:26 955F30 c New program number: 445E (FFFE:445E unknown) [pmt_list_management 3]

 

[lampe06]

AW: Sky S02 mit Oscam

@camelrider poste bitte noch mal deine config wie du es im Moment jetzt hast

 

[camelrider]

AW: Sky S02 mit Oscam

die aktuelle oscam.server

Spoiler

[reader]
label = s02intern
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1

oscam.conf

Spoiler

[global]
logfile = /var/cache/oscam.log
disableuserfile = 0
clienttimeout = 900000 # (für Kartenaktivierung evtl. Änderung des Wertes nötig)
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1


[cccam]
port = 34001
reshare = 1
forward_origin_card = 1
version = 2.0.3
stealth = 1
keepconnected = 1


[dvbapi]
enabled = 1
au = 1
boxtype = dreambox # (Änderung des Wertes bei anderen Boxen evtl. möglich)
user = local
pmt_mode = 0
decodeforever = 1


[webif]
httpport = 17000
httpuser = julian
httppwd = $int3rn3t
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255 # (bei Nutzung einer dyndns 0.0.0.0
httpdyndns = durch Eingabe einer eigenen DYNDNS kann auch von Unterwegs in Webif


[cache]
Delay = 120

oscam.user

Spoiler

[account]
user = local
group = 1,2,3
au = 1

lg Camelrider

 

[DreamHD]

AW: Sky S02 mit Oscam

Danach hab ich die caid=1702 gesetzt (ohne betatunnel - um diesen Fehler auszuschließen)

Und was sagt das Log mit
caid = 1702
cardmhz= 2700
autospeed= 1