Problema server debian oscam+Cccam

[Medioro]

salve vorrei chiedo aiuto per configurare il mio server debian
ho istallato con ipc oscam+Cccam,
ho preso le configurazioni da questo sito per skyit tvusat
quelle (meister85).
ho 3 smargo + USB HUB con alimentazione a esterna
nel server è attivata oscam 6956/cccam 2.3.0
ho letto tanto ma non riesco a farlo funzionare

se qualcuno può darmi un aiuto sarei molto grato


saluti Medioro
Oscam conf

Spoiler

logfile = /var/log/ipc/OScam.log
fallbacktimeout = 2000
failbantime = 5
cachedelay = 120
nice = -1
maxlogsize = 512
preferlocalcards = 1
saveinithistory = 1

[cccam]
port = xxxxx
reshare = 1
ignorereshare = 0
version = 2.3.0
reshare_mode = 0

[webif]
httpport = xxxxx
httphelplang = it
httpuser = xxxxx
httppwd = xxxxx
httpallowed = 0.0.0.0-255.255.255.255
httphideidleclients = 1

[DOWN]

Oscam Server

Spoiler

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = camd3emu
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 4

[reader]
label = skyitalia
protocol = mouse
device = /dev/ttyUSB1
password = meinserverpass
caid = 09CD
boxid = 001F1F1F
detect = cd
mhz = 1000
cardmhz = 357
ident = 09CD:000000
group = 2
emmcache = 1,3,2

[reader]
label = tivusat
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A9.....5
detect = cd
mhz = 358
cardmhz = 358
ident = 183D:000000,005411
group = 3
emmcache = 1,3,2

osacm user

Spoiler

[account]
user = cccam
pwd = cccam
caid = 1830
hostname = localhost
uniq = 1
group = 1
au = HD+

[account]
user = user
pwd = pas
group = 2,3
au = skyitalia,tivusat

Cccam conf

Spoiler

N: 127.0.0.1 22000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # Oscam Verbindung
#L: 127.0.0.1 20248 meinserver2 meinserverpass2 0D05 000000 # camd3 emu keys
#L: 127.0.0.1 20248 meinserver2 meinserverpass2 0D05 000004 # camd3 emu keys
#L: 127.0.0.1 20248 meinserver2 meinserverpass2 0D05 000010 # camd3 emu keys
#L: 127.0.0.1 20248 meinserver2 meinserverpass2 1722 000000 # camd3 emu keys
#L: 127.0.0.1 20248 meinserver2 meinserverpass2 0D00 000000 # camd3 emu keys

#C: 192.168.0.20 12000 username password no { 0:0:2 } # Forum / Username

#F: Test1 kR38K 0 0 0 { 0:0:1 }
#F: Test2 In57F 1 0 0 { 0:0:2 }
#F: Test3 Hv57M 2 0 0 { 0:0:3 }
#F: Test4 Hv57M 1 1 0 { 0:0:2 }
F: roxxxx roxxx 1 1 1 { 0:0:2 }

SERVER LISTEN PORT : xxxxx

WEBINFO LISTEN PORT : xxxxx
WEBINFO USERNAME : xxxxxx
WEBINFO PASSWORD : xxxxxx

#Lokale Karten - (Smargo Reader)
#SERIAL READER : /dev/ttyUSB0
#SERIAL READER : /dev/ttyUSB1 mouse
#SERIAL READER : /dev/ttyUSB2 phoenix
#SERIAL READER : /dev/ttyUSB3 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB3 8000000

#Block Global EMMs
B: /dev/ttyUSB0 04

CAID PRIO FILE : /var/keys/CCcam.prio
PROVIDERINFO FILE : /var/keys/CCcam.providers
CHANNELINFO FILE : /var/keys/CCcam.channelinfo

#Allgemeine Einstellungen
ALLOW TELNETINFO: no # Ansonsten ist PORT 16000 offen
MINIMUM DOWNHOPS: 1 # Nur Karten annehmen die weitergegeben werden koennen
DISABLE EMM : no # Ansonsten kommen keine Updates auf die Karten
EXTRA EMM LEVEL : no # Ansonsten werden EMM-Updates von HOP2 Clients angenommen
SHOW TIMING : yes # Antwortzeiten der Karten anzeigen
MINIMUM CLIENT VERSION : 2.0.0

Log

Spoiler

ide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x23560e0 s 0 root 127.0.0.1 0 server 11.05.13 22:07:47 00:15:25 0000:0000 00:00:01 OK
Hide 0x235f360 h 1 root 127.0.0.1 0 http 11.05.13 22:07:47 00:15:25 0000:0000 00:00:36 OK
Hide 0x2399e30 s 1 root 127.0.0.1 0 server 11.05.13 22:07:47 00:15:25 0000:0000 00:15:25 OK
Readers 0/3
Hide 0x7f1c60000e10 r 1 hd+ ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:23 OFF (no entitlements)
Hide 0x7f1c600045f0 r 2 skyitalia ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:23 ERROR (no entitlements)
Hide 0x7f1c600061e0 r 3 tivusat ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:22 ERROR (no entitlements)
Proxies 0/1
Hide Restart p 1 camd3emu ON ON 0.0.0.0 20248 camd35 0000:0000 no data 00:15:25 UNKNOWN

2013/05/11 22:07:47 0 s newcamd: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s cccam: initialized (fd=5, port=xxxx, crypted)
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s pandora: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s csp: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s radegast: disabled
2013/05/11 22:07:47 0 s starting thread http
2013/05/11 22:07:47 0 s http thread started
2013/05/11 22:07:47 0 s starting thread reader check
2013/05/11 22:07:47 235F360 h HTTP Server listening on port xxxx
2013/05/11 22:07:47 0 s reader check thread started
2013/05/11 22:07:47 0 s starting thread check
2013/05/11 22:07:47 0 s check thread started
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB2
2013/05/11 22:07:47 0 s creating thread for device 127.0.0.1
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB1
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB0
2013/05/11 22:07:47 60002A00 p camd35 proxy 127.0.0.1:20248
2013/05/11 22:07:47 60002A00 p proxy camd3emu initialized (server=127.0.0.1:20248)
2013/05/11 22:07:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/11 22:07:47 0 s waiting for local card init
2013/05/11 22:07:49 60000E10 r reader hd+ initialized (device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=357)
2013/05/11 22:07:49 600045F0 r reader skyitalia initialized (device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=357)
2013/05/11 22:07:50 600061E0 r reader tivusat initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2013/05/11 22:07:50 600045F0 r skyitalia card detected
2013/05/11 22:07:50 600061E0 r tivusat card detected
2013/05/11 22:07:56 600045F0 r ATR: 3F FD 13 xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:07:57 600061E0 r ATR: 3F FF 95 ide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x23560e0 s 0 root 127.0.0.1 0 server 11.05.13 22:07:47 00:15:25 0000:0000 00:00:01 OK
Hide 0x235f360 h 1 root 127.0.0.1 0 http 11.05.13 22:07:47 00:15:25 0000:0000 00:00:36 OK
Hide 0x2399e30 s 1 root 127.0.0.1 0 server 11.05.13 22:07:47 00:15:25 0000:0000 00:15:25 OK
Readers 0/3
Hide 0x7f1c60000e10 r 1 hd+ ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:23 OFF (no entitlements)
Hide 0x7f1c600045f0 r 2 skyitalia ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:23 ERROR (no entitlements)
Hide 0x7f1c600061e0 r 3 tivusat ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:15:22 ERROR (no entitlements)
Proxies 0/1
Hide Restart p 1 camd3emu ON ON 0.0.0.0 20248 camd35 0000:0000 no data 00:15:25 UNKNOWN

2013/05/11 22:07:47 0 s newcamd: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s cccam: initialized (fd=5, port=xxxxx, crypted)
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s pandora: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s csp: disabled
2013/05/11 22:07:47 0 s Starting listener 0
2013/05/11 22:07:47 0 s radegast: disabled
2013/05/11 22:07:47 0 s starting thread http
2013/05/11 22:07:47 0 s http thread started
2013/05/11 22:07:47 0 s starting thread reader check
2013/05/11 22:07:47 235F360 h HTTP Server listening on port xxxxx
2013/05/11 22:07:47 0 s reader check thread started
2013/05/11 22:07:47 0 s starting thread check
2013/05/11 22:07:47 0 s check thread started
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB2
2013/05/11 22:07:47 0 s creating thread for device 127.0.0.1
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB1
2013/05/11 22:07:47 0 s creating thread for device /dev/ttyUSB0
2013/05/11 22:07:47 60002A00 p camd35 proxy 127.0.0.1:20248
2013/05/11 22:07:47 60002A00 p proxy camd3emu initialized (server=127.0.0.1:20248)
2013/05/11 22:07:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/11 22:07:47 0 s waiting for local card init
2013/05/11 22:07:49 60000E10 r reader hd+ initialized (device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=357)
2013/05/11 22:07:49 600045F0 r reader skyitalia initialized (device=/dev/ttyUSB1, detect=cd, mhz=1000, cardmhz=357)
2013/05/11 22:07:50 600061E0 r reader tivusat initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2013/05/11 22:07:50 600045F0 r skyitalia card detected
2013/05/11 22:07:50 600061E0 r tivusat card detected
2013/05/11 22:07:56 600045F0 r ATR: 3F FD 13 xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:07:57 600061E0 r ATR: 3F FF 95 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:07:58 600045F0 r Reader skyitalia: Maximum frequency for this card is formally 5 Mhz, clocking it to 10.00 Mhz
2013/05/11 22:07:58 600061E0 r Reader tivusat: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2013/05/11 22:07:59 600061E0 r detect nagra tiger card
2013/05/11 22:08:01 600045F0 r card system not supported
2013/05/11 22:08:01 600045F0 r Normal mode failed, reverting to Deprecated Mode
2013/05/11 22:08:03 600061E0 r card system not supported
2013/05/11 22:08:03 600061E0 r Normal mode failed, reverting to Deprecated Mode
2013/05/11 22:08:07 600045F0 r ATR: 3F FD 13 xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:08:08 600045F0 r Reader skyitalia: Maximum frequency for this card is formally 5 Mhz, clocking it to 10.00 Mhz
2013/05/11 22:08:10 600061E0 r ATR: 3F FF 95 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:08:11 600061E0 r Reader tivusat: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2013/05/11 22:08:12 600061E0 r detect nagra tiger card
2013/05/11 22:08:12 600045F0 r card system not supported
2013/05/11 22:08:12 600045F0 r card initializing error
2013/05/11 22:08:16 600061E0 r card system not supported
2013/05/11 22:08:16 600061E0 r card initializing error
2013/05/11 22:08:17 0 s init for all local cards done
2013/05/11 22:08:17 0 s anti cascading disabled
2013/05/11 22:08:35 235F360 h Refresh Server requested by WebIF from 192.168.xxx.xxx
2013/05/11 22:07:58 600045F0 r Reader skyitalia: Maximum frequency for this card is formally 5 Mhz, clocking it to 10.00 Mhz
2013/05/11 22:07:58 600061E0 r Reader tivusat: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2013/05/11 22:07:59 600061E0 r detect nagra tiger card
2013/05/11 22:08:01 600045F0 r card system not supported
2013/05/11 22:08:01 600045F0 r Normal mode failed, reverting to Deprecated Mode
2013/05/11 22:08:03 600061E0 r card system not supported
2013/05/11 22:08:03 600061E0 r Normal mode failed, reverting to Deprecated Mode
2013/05/11 22:08:07 600045F0 r ATR: 3F FD 13 xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:08:08 600045F0 r Reader skyitalia: Maximum frequency for this card is formally 5 Mhz, clocking it to 10.00 Mhz
2013/05/11 22:08:10 600061E0 r ATR: 3F FF 95 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/11 22:08:11 600061E0 r Reader tivusat: Maximum frequency for this card is formally 5 Mhz, clocking it to 3.58 Mhz
2013/05/11 22:08:12 600061E0 r detect nagra tiger card
2013/05/11 22:08:12 600045F0 r card system not supported
2013/05/11 22:08:12 600045F0 r card initializing error
2013/05/11 22:08:16 600061E0 r card system not supported
2013/05/11 22:08:16 600061E0 r card initializing error
2013/05/11 22:08:17 0 s init for all local cards done
2013/05/11 22:08:17 0 s anti cascading disabled
2013/05/11 22:08:35 235F360 h Refresh Server requested by WebIF from 192.168.xxx.xxx

 

[meister85]

AW: server debian oscam+Cccam

Prova a impostare la frequenza da 1000 a 600. Il Smargo lo metti fisso a 600mhz. Nel reader metti smargopatch = 1. E metti una oscam piu attuale!

 

[Medioro]

AW: server debian oscam+Cccam

ciao Maister

grazie per la tua risposta.ho cambiato come mi haiconsigliato

purtroppo ancora non va.

agiungo dei log forse riesci a capire dove sbaglio.

una domanda da Oascam.user bisogna fare qualche collegamento

per poi scriver la F:linea nella Cccam cfg


saluti Medioro
Oscam serv

Spoiler

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
rsakey = BF3xxxxxxxxxxx
boxkey = xxxxxxxxxxxxx


[reader]
label = camd3emu
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 4

[reader]
label = skyita
protocol = mouse
device = /dev/ttyUSB1
caid = 09CD
boxid = 001F1F1F
detect = cd
mhz = 600
cardmhz = 357
ident = 09CD:000000
group = 2
emmcache = 1,3,2
smargopatch = 1

[reader]
label = tivusat
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A92xxxxxxxxxxx
detect = cd

Spoiler

[account]
user = cccam
pwd = cccam
caid = 1830
hostname = localhost
uniq = 1
group = 1
au = HD+

[account]
user = roccomi
pwd = roccomi
group = 2,3
au = skyitalia,tivusat

Log1

Spoiler

hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x1cae0e0 s 0 root 127.0.0.1 0 server 13.05.13 19:21:48 00:10:54 0000:0000 00:00:01 OK
Hide 0x1cb6ea0 h 1 root 127.0.0.1 0 http 13.05.13 19:21:48 00:10:54 0000:0000 00:00:02 OK
Hide 0x1cf5450 s 1 root 127.0.0.1 0 server 13.05.13 19:21:48 00:10:54 0000:0000 00:10:54 OK
Readers 1/3
Hide 0x1cf3b50 r 1 hd+ ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:10:54 ERROR (no entitlements)
Hide 0x1cf8d10 r 2 skyitalia ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:10:54 ERROR (no entitlements)
Hide 0x1cfabb0 r 3 tivusat ON OFF 127.0.0.1 0 mouse 13.05.13 19:21:48 00:10:54 0000:0000 no data 00:10:54 CARDOK (no entitlements)
Proxies 0/1
Hide Restart p 1 camd3emu ON ON 0.0.0.0 20248 camd35 0000:0000 no data 00:10:54 UNKNOWN
Clients 1/1
Hide Kill c 1 roccomi ON ON 84.59.231.208 57924 cccam (2.3.0-3367) 13.05.13 19:29:09 00:03:33 none:none by invalid (0ms) 00:00:05 OK

2013/05/13 19:28:06 1CF3B50 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:28:06 1CF3B50 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:28:06 1CF3B50 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:28:06 1CF3B50 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:28:06 1CF3B50 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:28:07 1CF3B50 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:28:07 1CF3B50 r hd+ [mouse] card system not supported
2013/05/13 19:28:07 1CF3B50 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
2013/05/13 19:28:10 1CF3B50 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:28:10 1CF3B50 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:28:10 1CF3B50 r hd+ [mouse] Calculated work ETU is 104.20 us
2013/05/13 19:28:10 1CF3B50 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:28:11 1CF3B50 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:28:12 1CF3B50 r hd+ [mouse] detect native nagra card
2013/05/13 19:28:14 1CF3B50 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/13 19:28:16 1CF3B50 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2013/05/13 19:28:18 1CF3B50 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:28:18 1CF3B50 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:28:18 1CF3B50 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:28:18 1CF3B50 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:28:18 1CF3B50 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:28:20 1CF3B50 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:28:21 1CF3B50 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/13 19:28:23 1CF3B50 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2013/05/13 19:28:25 1CF3B50 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:28:25 1CF3B50 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:28:25 1CF3B50 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:28:25 1CF3B50 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:28:25 1CF3B50 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:28:27 1CF3B50 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:28:27 1CF3B50 r hd+ [mouse] card system not supported
2013/05/13 19:28:27 1CF3B50 r hd+ [mouse] card initializing error
2013/05/13 19:29:09 1D07D60 c roccomi disconnected from 84.59.231.208
2013/05/13 19:29:09 1D0C0A0 c encrypted cccam-client 84.59.231.208 granted (roccomi, au=on (2 reader))
2013/05/13 19:29:17 1D0C0A0 c roccomi (183D&000000/0000/0002/91:00000000000000000000000000000000): invalid (0 ms) (0/0/0/0)
2013/05/13 19:30:37 0 --- Skipped 7 duplicated log lines ---
2013/05/13 19:31:37 0 --- Skipped 6 duplicated log lines ---
2013/05/13 19:32:37 0 --- Skipped 6 duplicated log lines ---

Log2

Spoiler

hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x1dc80e0 s 0 root 127.0.0.1 0 server 13.05.13 19:39:20 00:00:13 0000:0000 00:00:12 OK
Hide 0x1dd0ea0 h 1 root 127.0.0.1 0 http 13.05.13 19:39:21 00:00:12 0000:0000 00:00:00 OK
Readers 0/3
Hide 0x1e0db30 r 1 hd+ ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:00:12 NEEDINIT (no entitlements)
Hide 0x1e12cf0 r 2 skyita ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:00:12 ERROR (no entitlements)
Hide 0x1e14b90 r 3 tivusat ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:00:12 NEEDINIT (no entitlements)
Proxies 0/1
Hide Restart p 1 camd3emu ON ON 0.0.0.0 20248 camd35 0000:0000 no data 00:00:12 UNKNOWN

2013/05/13 19:39:21 1E12CF0 r skyita [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2013/05/13 19:39:21 1E14B90 r tivusat [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=358, cardmhz=358)
2013/05/13 19:39:22 1E0DB30 r hd+ [mouse] card detected
2013/05/13 19:39:22 1E12CF0 r skyita [mouse] card detected
2013/05/13 19:39:22 1E14B90 r tivusat [mouse] card detected
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] ATR: 3F C0 3F FD 13 25 xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] Setting baudrate to 9600 bps
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] Calculated work ETU is 62.00 us
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] ERROR: Parse_ATR returned error
2013/05/13 19:39:24 1E12CF0 r skyita [mouse] Error activating card.
2013/05/13 19:39:24 1E0DB30 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:39:24 1E0DB30 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:39:24 1E0DB30 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:39:24 1E0DB30 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:39:24 1E0DB30 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:39:26 1E14B90 r tivusat [mouse] ATR: 3F FF 95 00 FF 91 81 xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:39:26 1E14B90 r tivusat [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:39:26 1E14B90 r tivusat [mouse] Setting baudrate to 111600 bps
2013/05/13 19:39:26 1E14B90 r tivusat [mouse] Calculated work ETU is 8.94 us
2013/05/13 19:39:26 1E14B90 r tivusat [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.58 Mhz (specified in reader->mhz)
2013/05/13 19:39:26 1E0DB30 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] ATR: 3F C0 3F FD 13 25 02 50 80 0F
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] Setting baudrate to 9600 bps
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] Calculated work ETU is 62.00 us
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] ERROR: Parse_ATR returned error
2013/05/13 19:39:27 1E12CF0 r skyita [mouse] Error activating card.
2013/05/13 19:39:27 1E0DB30 r hd+ [mouse] detect native nagra card
2013/05/13 19:39:29 1E0DB30 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] ATR: 3F C0 3F FD 13 25 02 50 80 0F
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] Init card protocol T3, FI=1, F=372, D=1, N=63
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] Setting baudrate to 9600 bps
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] Calculated work ETU is 62.00 us
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] ERROR: Parse_ATR returned error
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] Error activating card.
2013/05/13 19:39:30 1E12CF0 r skyita [mouse] card initializing error
2013/05/13 19:39:30 1E0DB30 r hd+ [mouse] T1 Resync command error, trying to reactivate!

Log 3

Spoiler

ide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x1dc80e0 s 0 root 127.0.0.1 0 server 13.05.13 19:39:20 00:03:28 0000:0000 00:00:01 OK
Hide 0x1dd0ea0 h 1 root 127.0.0.1 0 http 13.05.13 19:39:21 00:03:27 0000:0000 00:00:01 OK
Hide 0x1e0f550 s 1 root 127.0.0.1 0 server 13.05.13 19:39:21 00:03:27 0000:0000 00:03:27 OK
Readers 1/3
Hide 0x1e0db30 r 1 hd+ ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:03:27 ERROR (no entitlements)
Hide 0x1e12cf0 r 2 skyita ON OFF 127.0.0.1 0 mouse 0000:0000 no data 00:03:27 ERROR (no entitlements)
Hide 0x1e14b90 r 3 tivusat ON OFF 127.0.0.1 0 mouse 13.05.13 19:39:21 00:03:27 0000:0000 no data 00:03:27 CARDOK (no entitlements)
Proxies 0/1
Hide Restart p 1 camd3emu ON ON 0.0.0.0 20248 camd35 0000:0000 no data 00:03:27 UNKNOWN
Clients 1/1
Hide Kill c 1 roccomi ON ON 84.59.231.208 57934 cccam (2.3.0-3367) 13.05.13 19:40:03 00:02:45 none:none by invalid (0ms) 00:00:02 OK

2013/05/13 19:39:41 1E14B90 r tivusat [nagra] ROM: T I G E R 0 0 3
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] REV: R e v 2 5 0
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] SER: ############
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] CAID: 183D
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] Prv.ID: 00 00 54 11 (sysid)
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] Activation Date : 01/01/2009
2013/05/13 19:39:41 1E14B90 r tivusat [nagra] Expiry Date : 31/12/2099
2013/05/13 19:39:42 1E0DB30 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:39:42 1E0DB30 r hd+ [mouse] card system not supported
2013/05/13 19:39:42 1E0DB30 r hd+ [mouse] Normal mode failed, reverting to Deprecated Mode
2013/05/13 19:39:44 1E0DB30 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:39:44 1E0DB30 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:39:44 1E0DB30 r hd+ [mouse] Calculated work ETU is 104.20 us
2013/05/13 19:39:44 1E0DB30 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:39:46 1E0DB30 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:39:47 1E0DB30 r hd+ [mouse] detect native nagra card
2013/05/13 19:39:48 1E0DB30 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/13 19:39:50 1E0DB30 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2013/05/13 19:39:52 1E0DB30 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:39:52 1E0DB30 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:39:52 1E0DB30 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:39:52 1E0DB30 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:39:52 1E0DB30 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:39:54 1E0DB30 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:39:56 1E0DB30 r hd+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2013/05/13 19:39:57 1E0DB30 r hd+ [mouse] T1 Resync command error, trying to reactivate!
2013/05/13 19:40:00 1E0DB30 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx
2013/05/13 19:40:00 1E0DB30 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2013/05/13 19:40:00 1E0DB30 r hd+ [mouse] Setting baudrate to 111600 bps
2013/05/13 19:40:00 1E0DB30 r hd+ [mouse] Calculated work ETU is 8.96 us
2013/05/13 19:40:00 1E0DB30 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2013/05/13 19:40:01 1E0DB30 r hd+ [mouse] Warning: Card returned error on setting ifsd value to 160
2013/05/13 19:40:01 1E0DB30 r hd+ [mouse] card system not supported
2013/05/13 19:40:01 1E0DB30 r hd+ [mouse] card initializing error
2013/05/13 19:40:02 0 s init for all local cards done
2013/05/13 19:40:02 0 s anti cascading disabled
2013/05/13 19:40:02 1E22E40 c anonymous disconnected from 84.59.231.208
2013/05/13 19:40:03 0 --- Skipped 2 duplicated log lines ---
2013/05/13 19:40:03 1E2C1A0 c encrypted cccam-client 84.59.231.208 granted (roccomi, au=on (1 reader))
2013/05/13 19:40:06 1E2C1A0 c roccomi (183D&000000/0000/0E1E/91:00000000000000000000000000000000): invalid (0 ms) (0/0/0/0)
2013/05/13 19:41:06 0 --- Skipped 5 duplicated log lines ---
2013/05/13 19:42:06 0 --- Skipped 6 duplicated log lines ---

 

[meister85]

AW: server debian oscam+Cccam

Come hai impostato il smargo?

 

[Medioro]

AW: server debian oscam+Cccam

li impostato cosi

pert Tvusat

Fixed
frequecy 369
kernel t=0
egt 0

sky it
Fixed
frequecy 600
kernel t=0
egt 0

hd+
Fixed
frequecy 600
kernel t=0
egt 0

medioro