Script für Oscam Start und Stop?

[latte0815]

Hi,

gibt es eigentlich schon Scripte um Oscam zu starten und zu beenden?

MfG

latte

 

[chrisbi]

AW: Script für Oscam Start und Stop?

Nutze einfach IPC. Da ist alles integriert was du brauchst

Oder hier:
HowTo Raspberry + Oscam_svn

Erster Beitrag...

Gesendet von meinem GT-I9000 mit Tapatalk 2

 

[aragorn]

AW: Script für Oscam Start und Stop?

das dort genannte script ist nicht unbedingt optimal - das ist nur ein standard init.d script was angepasst wurde..

man kann sich sowas aber auch schnell selber basteln.. es gibt hier aber auch irgendwo bereits posts mit solchen einfachen scripts - das ist nämlich nichts Raspberry spezielles

zum beispiel das hier:
(das ist bereits ziemlich umfangreich)

Spoiler

#!/bin/sh
#
# 08.2010
#
#
## Recommended HowTo:
#
# Add a new shell user and install there your Oscam:
#
#  useradd -m -s/bin/bash CS
#  usermod -G dialout,adm -a CS
#  su - CS
#  mkdir Oscam
#
# Copy your files as followed: (inc. this script as: OSCAM)
#
#  Oscam/
#  oscam  OSCAM  oscam.conf  oscam.server  oscam.services  oscam.srvid  oscam.user
#
# Add some cronjob entry so Oscam gets started on reboot and gets checked every minute:
#
# nano .cron
#
#  @reboot    $HOME/Oscam/OSCAM start  >/dev/null 2>&1
#  * * * * *     $HOME/Oscam/OSCAM check  >/dev/null 2>&1
#
# crontab .cron
#
# ...Feel free to change the paths...
# ...which depends on your receiver/system/image...
#
### CONFIG - START


# Enable colored output-lines on shell? [yes/no]
ENABLECOLORS="yes"

# Path where the Oscam binary lies, no trailing / [Oscam-default: /var/emu]
OScamPATH="/home/CS/Oscam"

# Name of the Oscam binary [Oscam-default: oscam]
OScamBIN="oscam"

# Options to start Oscam with [Oscam-default: <none>]
# NOTE: you MUST set "-c /path/to/Oscam" if its NOT Oscam-default!
# NOTE: DON'T edit unless you know what you are doing!
OScamOPTIONS="-b -c $OScamPATH"

# Where your Oscam-log is located if enabled?
OScamLOG="/tmp/oscam.log"

# default System's binary paths to locate nano and rar, no trailing /
# NOTE: DON'T edit unless you know what you are doing!
SYSTEMbinPATHS="/bin /usr/bin"

### CONFIG - END


# -------------------------------------------------------------- #
# >>> >> >  DO NOT MESS WiTH ANYTHiNG BELOW THiS LiNE!  < << <<< #
# -------------------------------------------------------------- #


#DEBUG="TRUE"
DEBUG="FALSE"
DATE=$(date)

if [ "$ENABLECOLORS" = "yes" ]; then
    ROT=$(tput setaf 1)
    GRUEN=$(tput setaf 2)
    BOLD=$(tput bold)
    NORM='tput op && tput sgr0'
    else
    ROT="" ; GRUEN="" ; BOLD="" ; NORM=""
fi

if [ "$SYSTEMbinPATHS" = "" ] && [ ! -z "$PATH" ]; then
    SYSTEMbinPATHS=$PATH
fi

# This method starts OScam
start_cam() {
    if ps x |grep -v grep |grep -c $OScamBIN >/dev/null
        then
        echo $ROT "ERROR: $OScamBIN still runs with pids: $(pidof $OScamBIN)..." ; $NORM
    else
        cd $OScamPATH
        ./$OScamBIN $OScamOPTIONS
        echo $GRUEN "Successfully started OScam ($OScamOPTIONS) with pids: $(pidof $OScamBIN)" ; $NORM
    fi
}
# This method stops OScam
stop_cam() {
    PiDS=$(pidof $OScamBIN)
    if [ -z "$PiDS" ]; then
        echo $ROT "ERROR: Cant see $OScamBIN to stop..." ; $NORM
    else
        echo $GRUEN "Stopping OScam with pids: $PiDS" ; $NORM
        for pid in $PiDS
            do kill -9 $pid >/dev/null 2>&1
        done
    fi
}
# This method checks for running process and starts if not...
check_run() {
    if ps x |grep -v grep |grep -c $OScamBIN >/dev/null
        then
        echo $GRUEN "Seems OScam still runs with pids: $(pidof $OScamBIN) ..." ; $NORM
    else
        echo $ROT "Cant see OScam... Restarting!" ; $NORM
        start_cam
    fi 
}

# This method watches the $OScamLOG in realtime...
monitor_log() {
    if [ ! -e $OScamLOG ]; then
        echo $ROT "ERROR: Cant find Oscam log $OScamLOG ... Is it enabled?" ; $NORM
    else
        echo " "
        echo $BOLD "Starting monitoring of $OScamLOG in realtime. Hit STRG + C to abort!" ; $NORM
        echo " "
        sleep 1
        tail -f $OScamLOG
    fi
}

proc_Get_Editor() {
    unset UseEDITOR
    for Spath in $SYSTEMbinPATHS ; do
        if [ -x "$Spath/nano" ]; then
            UseEDITOR="$Spath/nano -R"
        fi
    done
    if [ -z "$UseEDITOR" ]; then
        for Spath in $SYSTEMbinPATHS ; do
            if [ -x "$Spath/vi" ]; then
                UseEDITOR="$Spath/vi"
            fi
        done
    fi
    if [ -z "$UseEDITOR" ]; then
        echo $ROT "ERROR: Unable to locate Editor to open file - Be sure SYSTEMbinPATHS is set currectly!" ; $NORM
        proc_exit
    fi
}

# edit files given from $1
edit_file() {
    proc_Get_Editor
    case "$1" in
        conf*)
            EFILE="$OScamPATH/oscam.conf"
        ;;
        server*)
            EFILE="$OScamPATH/oscam.server"
        ;;
        user*)
            EFILE="$OScamPATH/oscam.user"
            ;;
            *)
            EFILE=""
            ;;
        esac
        if test -f $EFILE ; then
            echo "$EFILE wird geoeffnet.."
            sleep 1 ; $UseEDITOR $EFILE
        else
            echo -e "\033[1;31mKeine Konfiguration vorhanden $EFILE\033[0m"
        fi
}


## Procedure for logging
proc_log() {
  if [ "$OScamLOG" ]; then
    if [ -w "$OScamLOG" ]; then
      echo `$DATE "+%a %b %e %T %Y"` "$@" >> $OScamLOG
    else
      if [ "$USER" = "root" ]; then
        touch $OScamLOG
        if [ -x "chmod" ]; then
          chmod 666 $OScamLOG
        fi
      else
        logname=`basename $OScamLOG`
        echo "Error: Can not write to $logname. Create and set chmod 666."
      fi
    fi
  fi
}

proc_debug() {
  if [ "$DEBUG" = "TRUE" ]; then
    echo "$*"
  fi
}

proc_exit() {
  rm -f "/tmp/OscamCheck.lock"
  exit 0
}

if [ -e "/tmp/OscamCheck.lock" ]; then
    if [ "`find \"/tmp/OscamCheck.lock\" -type f -mmin -5`" ]; then
        echo "Lockfile /tmp/OscamCheck.lock exists and is not 5 minutes old yet. Quitting!"
        exit 0
    else
        echo "Lockfile exists, but its older then 5 minutes. Removing lockfile."
        touch "/tmp/OscamCheck.lock"
    fi
else
    touch "/tmp/OscamCheck.lock"
fi

case "$1" in
    [sS][tT][aA][rR][tT])
        echo "[SCRIPT] $1:"
        start_cam
    ;;
    [sS][tT][oO][pP])
        echo "[SCRIPT] $1:"
        stop_cam
    ;;
    [rR][eE][sS][tT][aA][rR][tT])
        echo "[SCRIPT] $1:"
        stop_cam
        sleep 5
        start_cam
    ;;
    [cC][hH][eE][cC][kK])
        echo "[SCRIPT] $1:"
        check_run
    ;;    
    [lL][oO][gG]|[sS][hH][oO][wW][lL][oO][gG])
        echo "[SCRIPT] $1:"
        monitor_log
    ;;
    [cC][oO][nN][fF])
        echo "[SCRIPT] $1:"
        edit_file "conf"
    ;;
    [sS][eE][rR][vV][eE][rR])
        echo "[SCRIPT] $1:"
        edit_file "server"
    ;;
    [uU][sS][eE][rR])
        echo "[SCRIPT] $1:"
        edit_file "user"
    ;;
    *)
        echo "Usage: $0 [start|stop|restart|check|log|conf|server|user]"
    ;;
    esac
proc_exit

und les dir dazu vielleicht auch mal den folgenden beitrag durch (ab dem "also:") Talk Raspberry Pi + SoftCam - Seite 3