Reader device error

[uwwi]

Moin,
habe mit meiner Oscam folgendes Problem.
Was mache ich falsch?
DM900 mit Orginalimage.

Oscam Log:

• 
  
  Spoiler

  [*]2017/06/13 17:49:32 7410E10E r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0
  [*]2017/06/13 17:49:34 7410E10E r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

 

[filius00]

@uwwi
Karte im falschen Schacht?
Wenn es das nicht ist solltest du mal etwas mehr zu deiner (-n) Karte (-n) und den zugehörigen Configs zeigen.

 

[uwwi]

Karte im falschen Schacht geht nicht, habe ja nur einen Kartenschacht und einen für ein ci modul

Spoiler

[reader]
label = SkyV14_1
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

finde den Fehler nicht, Karte auch schon kontrolliert, richtg drin

 

[dodo83]

an der Karte liegt es nicht ...
entweder fehlen die Treiber oder deiner OScam Version fehlt der Reader Support,
was steht in der oscam.version?

cardreader_internal_sci: yes

 

[filius00]

im falschen Schacht geht nicht,

Wenn nur 1 da ist hast du recht
Dachte die 900 hätte 2.
Poste mal ein Log vom Start der Oscam an bis zum Einlesen der Karte (oder auch nicht einlesen)

 

[uwwi]

Oscam version und log,
Oscam zu alt?


OscamDreambox r11283

Spoiler

• 2017/06/13 18:26:15 00000000 s (main) System name = Linux

• 2017/06/13 18:26:15 00000000 s (main) Host name = dm900

• 2017/06/13 18:26:15 00000000 s (main) Release = 3.14-1.15-dm900

• 2017/06/13 18:26:15 00000000 s (main) Version = #8 SMP Fri Dec 9 17:15:10 UTC 2016

• 2017/06/13 18:26:15 00000000 s (main) Machine = armv7l

• 2017/06/13 18:26:15 00000000 s (main) Stb model = dm900

• 2017/06/13 18:26:15 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 2838

• 2017/06/13 18:26:15 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled

• 2017/06/13 18:26:15 00000000 s (main) signal handling initialized

• 2017/06/13 18:26:15 00000000 s (net) cccam: initialized (fd=5, port=12000)

• 2017/06/13 18:26:15 00000000 s (reader) SkyV14_1 [internal] creating thread for device /dev/sci0

• 2017/06/13 18:26:15 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)

• 2017/06/13 18:26:15 00000000 s (main) waiting for local card init

• 2017/06/13 18:26:15 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:15 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:15 7410E10E h (webif) webif: decompressed 174283 bytes back into 424504 bytes

• 2017/06/13 18:26:15 7410E10E h (webif) HTTP Server running. ip=0.0.0.0 port=8888

• 2017/06/13 18:26:17 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:17 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:19 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:19 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:21 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:21 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:23 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:23 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:25 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:25 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

• 2017/06/13 18:26:27 2DF57A2C r (reader) SkyV14_1 [internal] ERROR: Opening device /dev/sci0 (errno=16 Device or resource busy)

• 2017/06/13 18:26:27 2DF57A2C r (reader) SkyV14_1 [internal] Cannot open device: /dev/sci0

 

[dodo83]

nicht die Version der Oscam sonder den Inhalt der oscam.version

WebIF -> FILES -> oscam.version

 

[uwwi]

meinst du das?

Spoiler

Unix starttime: 1497371175
Starttime: 13.06.2017 18:26:15
Version: oscam-1.20-unstable_svn-r11283
Compiler: arm-linux-gnueabihf
Box type: dm900 (generic)
PID: 872
TempDir: /tmp/.oscam
ConfigDir: /usr/config/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API read-sdt charsets: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_drecas: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: no
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes

 

[prangsta]

hast du evtl noch eine cam ( CCcam ? ) am laufen ?
oder die box mal komplett neu gestartet ??

 

[uwwi]

wie finde ich heraus ob noch eine andere cam läuft?

 

[Derek Buegel]

Trag doch mal spasseshalber sci1 ein. Vlt wird der Reader anders angesprochen.

MfG

 

[uwwi]

Habe ich schon gemacht, bleibt beim selben Ergebnis.

 

[uwwi]

Werde mal ein anderes Image flashen mal sehen was dann passiert.
Danke an alle.

Melde mich dann nochmal

Gruß

 

[dodo83]

oder teste auch erstmal eine andere OScam Version

 

[uwwi]

So, Newnigma geflasht und plötzlich Cardreader OK.

Aber dafür wird nicht hell.
vielleicht kann mal jemand schauen was da los ist?
Karte gepairt?

Spoiler: Log Datei

Switch displayed log lines from 512 to

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

• 2017/06/13 19:22:14 00000000 s (main) System name = Linux
• 2017/06/13 19:22:14 00000000 s (main) Host name = dm900
• 2017/06/13 19:22:14 00000000 s (main) Release = 3.14-1.17-dm900
• 2017/06/13 19:22:14 00000000 s (main) Version = #36 SMP Thu May 11 13:11:24 CEST 2017
• 2017/06/13 19:22:14 00000000 s (main) Machine = armv7l
• 2017/06/13 19:22:14 00000000 s (main) Stb model = dm900
• 2017/06/13 19:22:14 00000000 s (main) creating pidfile /var/run/oscam.pid with pid 2156
• 2017/06/13 19:22:14 00000000 s (emu) OSCam-Emu version 739
• 2017/06/13 19:22:14 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
• 2017/06/13 19:22:14 00000000 s (main) signal handling initialized
• 2017/06/13 19:22:14 00000000 s (config) 5 provid's loaded
• 2017/06/13 19:22:14 00000000 s (config) 213 service-id's loaded in 1 ms
• 2017/06/13 19:22:14 00000000 s (reader) SkyV14_1 [internal] creating thread for device /dev/sci0
• 2017/06/13 19:22:14 00000000 s (reader) emulator [emu] creating thread for device emulator
• 2017/06/13 19:22:14 00000000 s (main) waiting for local card init
• 2017/06/13 19:22:14 16A4E736 r (reader) SkyV14_1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2017/06/13 19:22:14 16A4E736 r (reader) SkyV14_1 [internal] Reader sci internal, detected box type: dm900
• 2017/06/13 19:22:14 2ABA318C r (emu) Key file not found in: /etc/tuxbox/config
• 2017/06/13 19:22:14 2ABA318C r (emu) Key file not found in: /var/keys
• 2017/06/13 19:22:14 2ABA318C r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
• 2017/06/13 19:22:14 00000000 (emu) INFO: FFDecsa parallel mode = 32
• 2017/06/13 19:22:14 275A38BD h (webif) webif: decompressed 197129 bytes back into 469640 bytes
• 2017/06/13 19:22:14 275A38BD h (webif) HTTP Server running. ip=0.0.0.0 port=8888
• 2017/06/13 19:22:15 16A4E736 r (reader) SkyV14_1 [internal] card detected
• 2017/06/13 19:22:15 2ABA318C r (reader) emulator [emu] card detected
• 2017/06/13 19:22:16 2ABA318C r (reader) emulator [emu] found card system emu
• 2017/06/13 19:22:16 2ABA318C r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/06/13 19:22:17 2ABA318C r (emu) Key file not found in: /etc/tuxbox/config
• 2017/06/13 19:22:17 2ABA318C r (emu) Key file not found in: /var/keys
• 2017/06/13 19:22:17 16A4E736 r (reader) SkyV14_1 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2017/06/13 19:22:17 16A4E736 r (reader) SkyV14_1 [internal] Sky Deutschland V14 recognized
• 2017/06/13 19:22:17 16A4E736 r (reader) SkyV14_1 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2017/06/13 19:22:17 16A4E736 r (reader) SkyV14_1 [internal] Calculated work ETU is 5.17 us reader mhz = 450
• 2017/06/13 19:22:17 16A4E736 r (reader) SkyV14_1 [internal] Buffers readed 0 bytes total time_us 75101
• 2017/06/13 19:22:18 16A4E736 r (reader) SkyV14_1 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Card type: P1TV
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Rom version: 20AA
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Credit available on card: 0 euro
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Extended 4C detected
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] FuseByte: 25
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Region Code: 00BO0102
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Country Code: DEU
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Pincode read: 2236
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] PCB settings: FF FF FF FF
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] Parental control disabled
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] serial: ########, BoxID: ########, baseyear: 2004
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] ready for requests
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [internal] found card system videoguard2
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] card detected
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] ------------------------------------------------------------------
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] +---------+----------+---------------------+---------------------+
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 007b --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 007d --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 0081 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 008e --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00c0 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00c8 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00c9 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00ca --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00c7 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00e4 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00e5 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00f0 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00f3 --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] |-- 00 ---|-- 00ff --| 2017/08/08-01:00:00 |
• 2017/06/13 19:22:19 16A4E736 r (reader) SkyV14_1 [videoguard2] ------------------------------------------------------from-ins70--
• 2017/06/13 19:22:20 00000000 s (main) init for all local cards done
• 2017/06/13 19:22:20 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
• 2017/06/13 19:22:20 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
• 2017/06/13 19:22:20 00000000 s (anticasc) anti cascading disabled
• 2017/06/13 19:22:20 4B99BF22 c (client) plain dvbapi-client granted (DVBApi, au=auto (2 reader))
• 2017/06/13 19:22:20 4B99BF22 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
• 2017/06/13 19:22:20 4B99BF22 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2017/06/13 19:25:20 4B99BF22 c (dvbapi) Demuxer 0 stop descrambling program number 6DCA (FFFE@FFFFFE:6DCA unknown)

Gruß