RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

[randyandy21]

Hallo Forum,
ich habe meinen Oscam Server von der Synology auf den Raspi umgezogen. Wenn der Raspi neu gestartet wird läuft alles auch richtig, nach kurzer Zeit kommen folgende Fehlermeldungen...

Spoiler

2014/12/28 18:33:50 1182070 c User1 (1843&000000/0000/EF11/89:22F01D14A3672BF00899B5CBD0D4E049): found (406 ms) by HD+ - VOX HD
2014/12/28 18:34:00 1182070 c User1 (1843&000000/0000/EF11/89:6ECE5D314235D570E0C632F769226229): found (407 ms) by HD+ - VOX HD
2014/12/28 18:34:10 1182070 c User1 (1843&000000/0000/EF11/89:320E8A8D63B53A49117E01B633354513): found (399 ms) by HD+ - VOX HD
2014/12/28 18:34:18 0 HD+ [nagra] SR: submit async transfer failed with error -1
2014/12/28 18:34:20 0 --- Skipped 1 duplicated log lines ---
2014/12/28 18:34:20 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:20 1176C58 r HD+ [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/28 18:34:20 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:21 1185E78 c client connected to 50002 port
2014/12/28 18:34:21 1185E78 c encrypted newcamd:50002-client ##.#.###.## granted (vdr, au=auto (1 reader))
2014/12/28 18:34:21 1185E78 c user vdr authenticated successfully (generic)
2014/12/28 18:34:21 1185E78 c AU enabled for user vdr on reader HD+
2014/12/28 18:34:21 1176C58 r HD+ [nagra] T1 Resync command error, trying to reactivate!
2014/12/28 18:34:21 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:25 0 --- Skipped 9 duplicated log lines ---
2014/12/28 18:34:25 1182070 c User1 (1843&000000/0000/EF11/89:1C85D98AAD920BFE183E5E1963769668): timeout (5000 ms) by HD+ - VOX HD
2014/12/28 18:34:25 1182070 c unexpected ecm answer rc=100.
2014/12/28 18:34:25 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:26 0 --- Skipped 4 duplicated log lines ---
2014/12/28 18:34:26 1185E78 c vdr (1843&000000/0000/EF74/89:51479F97CA8600D762B3FA3D0C60D72F): timeout (5000 ms) by HD+ - SAT.1 HD
2014/12/28 18:34:26 1185E78 c unexpected ecm answer rc=100.
2014/12/28 18:34:28 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:30 0 --- Skipped 5 duplicated log lines ---
2014/12/28 18:34:30 1176C58 r HD+ [nagra] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/12/28 18:34:30 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1
2014/12/28 18:34:31 1176C58 r HD+ [nagra] T1 Resync command error, trying to reactivate!
2014/12/28 18:34:31 1176C58 r HD+ [nagra] usb bulk write failed : ret = -1

Habt Ihr ne Idee???

Gruß
Randyandy

 

[bombadil]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Hi,

hat der raspi genug Power am USB?

Grüße
Bombadil

 

[Alex]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

• Welche Oscam Version verwendest du?
• Ist dein System aktuell?
• Welcher Cardreader?
• Wie sehen deine Configs aus?

Wie du siehst Fragen über Fragen

 

[randyandy21]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Ihr seit ja fix...

Ich habe ein 2A Netzteil dran. So ein bis zwei Minuten geht ja auch alles auf meinen 2 Abnehmern (VDR und MacMini mit EyeTV)
Meine Oscam Version ist 1.20 unstable 9921
Hier mal das Logfile vom Start bis zum ersten entschlüsseln...

Spoiler

2014/12/28 17:45:17 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
2014/12/28 17:45:17 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2136
2014/12/28 17:45:17 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2014/12/28 17:45:17 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/12/28 17:45:17 0 s signal handling initialized
2014/12/28 17:45:17 0 s newcamd: initialized (fd=5, port=50002)
2014/12/28 17:45:17 0 s -> CAID: 1843 PROVID: 000000
2014/12/28 17:45:17 0 s HD+ [smartreader] creating thread for device Serial:Reader AB299B6
2014/12/28 17:45:17 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/12/28 17:45:17 0 s waiting for local card init
2014/12/28 17:45:17 CCE250 h webif: decompressed 149826 bytes back into 364788 bytes
2014/12/28 17:45:17 CCC370 r HD+ [smartreader] Reader initialized (device=Serial:Reader AB299B6, detect=cd, mhz= AUTO, cardmhz=369)
2014/12/28 17:45:17 CCE250 h HTTP Server running. ip=0.0.0.0 port=3001
2014/12/28 17:45:18 CCC370 r HD+ [smartreader] card detected
2014/12/28 17:46:05 CCC370 r HD+ [smartreader] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2014/12/28 17:46:05 CCC370 r HD+ [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/12/28 17:46:05 CCC370 r HD+ [smartreader] Calculated work ETU is 5.99 us reader mhz = 534
2014/12/28 17:46:05 CCC370 r HD+ [smartreader] Effective reader settings mhz =534 F= 512 D= 16 N=0 T=1 inv=1 parity=ODD
2014/12/28 17:46:06 CCC370 r HD+ [smartreader] ATR Fsmax is 5 MHz, clocking card to ATR Fsmax for smartreader cardspeed of 5.34 MHz (specified in reader->mhz)
2014/12/28 17:46:06 CCC370 r HD+ [smartreader] Card responded ok for ifsd request of 160
2014/12/28 17:46:07 CCC370 r HD+ [smartreader] detect native nagra card
2014/12/28 17:46:08 CCC370 r HD+ [smartreader] ready for requests
2014/12/28 17:46:08 CCC370 r HD+ [smartreader] found card system nagra
2014/12/28 17:46:08 CCC370 r HD+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/12/28 17:46:08 CCC370 r HD+ [nagra] ROM: D N A S P 1 8 0
2014/12/28 17:46:08 CCC370 r HD+ [nagra] REV: M e r 0 0 0
2014/12/28 17:46:08 CCC370 r HD+ [nagra] SER: ############
2014/12/28 17:46:08 CCC370 r HD+ [nagra] CAID: 1843
2014/12/28 17:46:08 CCC370 r HD+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/12/28 17:46:08 CCC370 r HD+ [nagra] Prv.ID: 00 00 00 00
2014/12/28 17:46:08 CCC370 r HD+ [nagra] IRD ID: ############
2014/12/28 17:46:08 CCC370 r HD+ [nagra] active to: 2015/02/07 11:59
2014/12/28 17:46:08 CCC370 r HD+ [nagra] -----------------------------------------
2014/12/28 17:46:08 CCC370 r HD+ [nagra] |id |tier |valid from |valid to |
2014/12/28 17:46:08 CCC370 r HD+ [nagra] +----+--------+------------+------------+
2014/12/28 17:46:08 CCC370 r HD+ [nagra] |8011|0066 |2014/03/03 |2015/03/04 |
2014/12/28 17:46:09 CCC370 r HD+ [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2014/12/28 17:46:09 CCC370 r HD+ [nagra] -----------------------------------------
2014/12/28 17:46:09 0 s init for all local cards done
2014/12/28 17:46:09 0 s anti cascading disabled
2014/12/28 17:46:09 CDEEA0 c client connected to 50002 port
2014/12/28 17:46:09 0 --- Skipped 1 duplicated log lines ---
2014/12/28 17:46:09 CDEEA0 c encrypted newcamd:50002-client xx.xx.xx.xx granted (User1, au=auto (1 reader))
2014/12/28 17:46:09 CDEEA0 c user User1 authenticated successfully (eyetvCamd)
2014/12/28 17:46:09 CDEEA0 c AU enabled for user User1 on reader HD+
2014/12/28 17:46:09 CDD070 c encrypted newcamd:50002-client xx.xx.xx.xx granted (vdr, au=auto (1 reader))
2014/12/28 17:46:09 CDD070 c user vdr authenticated successfully (generic)
2014/12/28 17:46:09 CDD070 c AU enabled for user vdr on reader HD+
2014/12/28 17:46:10 CDEEA0 c User1 (1843&000000/0000/EF11/89:E3EF1C6CFA10957963D49F6C2C750540): found (406 ms) by HD+
2014/12/28 17:46:10 CDEEA0 c User1 (1843&000000/0000/EF11/89:ED03FB71ACD14087697C068DBA4AFF90): found (402 ms) by HD+

 

[Alex]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Bleiben nur noch 3 Fragen:

• Ist dein System aktuell?
• Welcher Cardreader?
• Wie sehen deine Configs aus?

 

[randyandy21]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Ok, dann der Reihe nach...
zu 1:
Ich habe den frischen Raspi von der mitgelieferten Noobs (?) SD installiert. Die Oscam Installation laut dem HowTo von raspberry.tips (

Sie müssen registriert sein, um Links zu sehen.

)

zu 2:
Smargo Cardreader (hatte ich im Titel schon geschrieben ;-))

zu 3:
oscam.conf

Spoiler

[global]nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /tmp/oscam.log
maxlogsize = 256


[webif]
HttpPort = 3001
HttpUser = admin
HttpPWD = oscam
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 10.1.10.1-10.1.10.255
HttpReadOnly = 1


[newcamd]
port = 50002@1843:000000
key = 0102030405060708091011121314

oscam.user

Spoiler

[account]user = User1
pwd = Pass1
monlevel = 4
au = 1
group = 1
services = v14


[account]
user = vdr
pwd = vdr
description = yaVDR
monlevel = 4
au = 1
group = 1
services = v14

oscam.server

Spoiler

[reader]label = HD+
description = HD+
protocol = smartreader
#protocol = mouse
device = Serial:Reader AB299B6
#device = /dev/ttyUSB0
services = v14
caid = 1843
boxid = 12345678
boxkey = A7xxxxxC
rsakey = BFxxxxxD5
detect = cd
mhz = 534
cardmhz = 369
group = 1
emmcache = 1,1,2

oscam.services

Spoiler

[v14]caid = 1843
provid = 000000,000401
srvid = 000C,000D,000E,0010,0013,0015,0016,0017,0018,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8,0206,0008,0009,000A,000B,0014,0019,0029,002B,0203
,0204,0011,0035,00DD,00DE,00FD,0107,0111,011B,0125,012F,0139,0143,014D,016B,0175,00DF,0106,0110,011A,0124,012E,0138,0142,014C,0156,0160,00FC,00FB,00FE,0105,0108,010F,0119,0123,
012D,0137,0141,014B,0078,007B,007B,007D,006A,006B,006F,0074,006E,0070,0076,0071,007C,0077,0081,0072,0069,006C,0082,0083,0084,0084,0075,0021,0023,0025,0026,0038,003A,3331,07FF,0
027,0037,2EFE,0039,4461,4462,6FF1,7001,7009,700A,003B,0046,0201,0159,0163,016D,0079,007A,2F45,2F46,2F47,2F49,2F4A,2F48,4E91,5E2F,5E27,5E28,5E29,42DC,75A0,5E2A,4E8C,5E30,71B4,62
0D,75A1,5E2C,42D8,3B06,69E0,69E4,5E25,75A2,4E8B,2F4B,2B60,4E94,2F4F,2B5E,2F4C,2B63,6DCE,2F4D,2F4E,371A,5667,5E2D,2B61,4E8F,4E90,69DF,4E93,4E97,4AA8,620E,5A48,4AAC,000E,3331,332
E,6210,2F50,3B07,6606,75A3,3339,0032,0010,2B64,332D,332F,3335,3338,371F,3333,3334,2B66,372B,3718,69E3,3B00,3330,2B65,372C,3337,6211,3716,3B03,3B02,6212,3B08,4AAA,0018,3B0C,4AAB
,371C,3AFD,3AFE,371D,3AFF,6217,371E,5270,5271,3719,526E,526F,5272,526D,3B04,3B05,6DD0,42DA,69EA,5274,5273,71B5,71B6,69E9,759B,759C,6DCF,4E96,7D65,7D66,7D67,7D68,8150,814D,814E,
814F,94D5,94D6,94D7,621B,797F,75A4,94D8,90EE,90EF,90ED,90F0,4AA7,4AA6,4AA5,4AA4,4AA3,4AA2,3EEA,3EE9,3EE8,3EE7,3EE6,3EE5,42CD,42CE,42CF,42D0,42D1,42D2,42D3,42D4,000A,000B,002B,0
009,001B,002A,000E,000D,000C,0034,0024,0203,0008,0010,0204,0029,0017,0014,0032,0018,0016,0206,001D,001C,0022,0013,0019,00A8,001A,00DF,0106,0110,011A,0124,012E,0138,0142,014C,01
56,0160,00FC,0011,00DD,00DE,00FD,014D,0143,0139,012F,0125,011B,0107,0111,016B,0175,0012,00FB,0105,010F,0119,0123,012D,0137,0141,014B,00FE,0108,0201,0159,0163,016D,797D,3341,334
2,3343,3344,3345,3346,3347,3348,3349,334A,334B,334C,334D,334E,334F,3350,3729,372A,0096,0097,0098,0099,009A,009B,009C,6601,6602,2B72,2B73,2B74,2B75,2B76,2B77,2B78,2B79,2B7A,2B7B
,2B7C,2B7D,2B7E,2B7F,2B80,2B81,2B82,2B83,2B84,2B85,2B86,2B87,2B88,2B89,2B8A,2B8B,2B8C,2B8D,2B8E,2B8F,2B90,6DCD,65F7,5669,2B71,C3B5,C3BE,C4E0,C4E1,C4E2,C4E4,C4E5,C4E6,C4E7,C4E8,
C60C,CF09,CF0A,CF0C,CF0D,CF0E,CF0F,CF12,CF76,CF7F,CFDB,CFE3,D09B,D10A,D10B,D161,D162,D163,D164,D165,D166,D167,D168,D169,D16C,D16D,D16E,D16F,D170,CF77,D171,D172,D173,D174,D175,D
176,D177,D178,D179,D17A,D17B,D17E,C3B6

Ich hoffe das passt so...
Gruß
Randyandy

 

[Alex]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Dann solltes du dein System zuerst mal auf den aktuellen Stand bringen. Ich geh' davon aus, dass es sich um Raspbian handelt.

1. sudo apt-get update && sudo apt-get dist-upgrade -y
2. sudo rpi-update
3. Reboot

Den Smargo hatte ich wohl überlesen, aber der mach da sehr gerne Ärger in Verbindung mit T1 Resync command error

 

[randyandy21]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

So, die Updates sind durchgelaufen... war ne Menge...

Das Verhalten ist leider wie gehabt :-(
Erst geht alles, dann kommen die Fehlermeldungen und nix wird mehr entschlüsselt... dann schmiert Oscam auch noch ab habe ich festgestellt...

 

[Alex]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Mir fällt dann leider nix mehr dazu ein, außer das du nen anderen Reader testest. Z.B. Easymouse

 

[randyandy21]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

OK, habe gerade mal einen bestellt... mal schauen was damit geht, solange wird halt SD geschaut :-(
Gruß
Randyandy

edit...
cool wollte gerade auf gelöst setzten, ist das schon erledigt!!!! Magic!

 

[Alex]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

Meld dich, wennn du noch was brauchst

 

[randyandy21]

AW: RaspberryPi B+, Oscam Server, Smargo, HD02, usb bulk write failed

So, die Easymouse ist endlich angekommen... gestern in Betrieb genommen, Parameter angepasst, kurz noch eine Fehlermldung ala ....unexpected ecm answer rc=100.... nach Neustart ist aber alles tutti. Gestern Abend und heute Morgen alles bestens!
Danke Euch!!!
Gruß
Randyandy