Q-active teutonic 2 - Channel List updated [18 August 08] - This backup image is best used with a Motorised setup set, using the DISEqC 1.2 option. - Based on the QBox Official Image v1.4.0. - All satellites from 80east to 45west are included. How to Install the Backup Image: To load the image, open QBox Updater and click Restore Backup, when re-booting the QBox use the rocker switch on the rear of the receiver to turn it off, and then wait for a minimum of 30 seconds before turning back on. After the boot logo has been displayed, there will be a delay of upto 1 minute, during the delat the 'Duolabs QBox logo will be displayed, so you will know the loading process is active. Default Settings: The default satellite is: Astra 1 [19.2e] Russia Today is the default channel on startup CCcam is the default Emu Language: English Time Zone: GMT Selecting Emu's: First click the Blue button then click on Emustarter 1.1 to access Conax or DigitALB channels, click on the Red button or highlight and click UNDERW. For DigiTV, Premiere, Polsat etc, just click on the Blue or Yellow button in Emustarter, or highlight and click CCcam or MGCamd To activate an Emu: 1 .. If a channel do not open within 15 seconds try the options 2 or 3 2 .. Change channel, and that will activate the selected Emu. 3 .. Go directly back into the Emustarter options, and highlight and click ENIGMA, after a short pause it will restart using the selected Emu. How To select Premiere Direkt PPV channels: Simply view the Premiere Direkt Portal channel, and press the Green button. Updating Keys: - Click the Blue button then select HackSat Key v9b, then highlight mgcamd and the click OK button. Card Readers: Both the Top & Bottom Card reader's will only work with GBox Emu. Only the Bottom Card reader is working with all other Emu's. CS: GBox & CCcam okay, just click the Blue button, and select whichever you require. Dieser Link ist nur für Mitglieder!!! Jetzt kostenlos Registrieren ?