oscam startet teilweise nicht automatisch / unbekannte Abbrüche

[streetracer12345]

Guten Morgen zusammen,

ich habe 2 Problestellungen bei denen ich keine Ursache finde:

1. Oscam (auf Samy TV) startet teilweise nicht automatisch - mal geht es mal muss ich via Telnet mit dem Befehl /mnt/etc/init.d/02_05_libOSCAM.init manuell starten.
Dabei erhalte ich folgende Ausgabe:

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

[/URL][/IMG]

2. ab und zu wird es mit einem Mal dunkel und ich kann erst nach einem Restart der Oscam den Bildschirm wieder erhellen. Was ich im Log gesehen hab das ich vermutlich
in dem Moment wo es dunkel wird "wrong ECM...." stehen hab. Ich gehe aber davon aus das wenn danach wieder ein "found" kommt sollte es doch automatisch wieder hell
werden, oder?

Ich hänge mal alles an Log´s und Config`s an was ich hab - vielleicht fällt einem der Experten hier was auf.

INFO: Leider will der Serverinhaber [Sender] die Version der Oscam nicht ändern (...never touch a running System usw.) - von dem her bleibt mir nur die Anpassung meiner Seite.



Oscam-Version Sender

Spoiler

Unix starttime: 1445187449
Starttime: 18.10.2015 16:57:29
Version: oscam-1.20-unstable_svn-r9921
Compiler: arm-linux-gnueabihf
ConfigDir: /usr/local/etc/

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

oscam.conf Sender

Spoiler

[global]
logfile = /tmp/oscam.log
emmlogdir = /tmp/
logduplicatelines = 1
nice = -1
maxlogsize = 1500
preferlocalcards = 1
recv_timeout = 4000
fallbacktimeout = 2500
ecmfmt = c/s/l
sleep =
bindwait = 120
clientmaxidle = 120

[cccam]
port = 12000
version = 2.1.4
recv_timeout = 4000
keepconnected = 1
stealth = 1

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8085
httpuser = XXXX
httppwd = XXXX
httprefresh = 480
httppollrefresh = 2
httpshowecminfo = 1
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15

oscam.server Sender

Spoiler

[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
#ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
group = 1
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
ndsversion = 2

meine Oscam Version

Spoiler

Unix starttime: 145
Starttime: 01.01.1970 02:02:25
Version: oscam-1.20-unstable_svn-r10663
Compiler: arm-v7a8v3r1-linux-gnueabi-libusb
Box type: generic (generic)
ConfigDir: /mtd_rwcommon/oscam/
WebifPort: 8085

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: yes
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: yes
LED support: yes
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: no
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

meine oscam.conf

Spoiler

[global]

nice = -1
pidfile = /dtv/oscam.pid
logfile = /mtd_rwcommon/oscam/oscam.log
maxlogsize = 256
cwlogdir = /dtv/
waitforcards = 0

[dvbapi]
enabled = 1
boxtype = pc
pmt_mode = 6
user = XXXX


[webif]
httpport = 8085
httpuser = XXXX
httppwd = XXXX
httpcss = /mtd_rwcommon/oscam/Envi_Template.css
httptpl = /mtd_rwcommon/oscam/tpl
httpshowpicons = 1
httppiconsize = 25
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 0.0.0.0-255.255.255.0
hideclient_to = 30
httposcamlabel = OSCam - TV

meine oscam.server

Spoiler

[reader]
label = v14
protocol = cccam
device = XXXX.de,12000
user = XXXX
password = XXXX
ins7e11 = 15
inactivitytimeout = 30
group = 1
#cccamversion = 2.1.4
ccckeepalive =1

Sender LiveLog

Spoiler

>> OSCam << cardserver started at Tue Oct 13 08:09:41 2015
-------------------------------------------------------------------------------
2015/10/13 08:09:41 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9921 (arm-linux-gnueabihf)
2015/10/13 08:09:41 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12128
2015/10/13 08:09:41 0 s userdb reloaded: 5 accounts loaded, 0 expired, 0 disabled
2015/10/13 08:09:41 0 s signal handling initialized
2015/10/13 08:09:41 0 s monitor: initialized (fd=5, port=988)
2015/10/13 08:09:41 0 s newcamd: initialized (fd=6, port=13000)
2015/10/13 08:09:41 0 s -> CAID: 098C PROVID: 000000
2015/10/13 08:09:41 0 s cccam: initialized (fd=7, port=12000)
2015/10/13 08:09:41 0 s v14 [mouse] creating thread for device /dev/ttyUSB0
2015/10/13 08:09:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/10/13 08:09:41 0 s waiting for local card init
2015/10/13 08:09:41 1426298 h webif: decompressed 149826 bytes back into 364788 bytes
2015/10/13 08:09:41 1426298 h HTTP Server running. ip=0.0.0.0 port=8085
2015/10/13 08:09:41 14181D0 r v14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/10/13 08:09:42 14181D0 r v14 [mouse] card detected
2015/10/13 08:09:43 14181D0 r v14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/10/13 08:09:43 14181D0 r v14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/10/13 08:09:43 14181D0 r v14 [mouse] Setting baudrate to 153600 bps
2015/10/13 08:09:43 14181D0 r v14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2015/10/13 08:09:43 14181D0 r v14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/10/13 08:09:44 14181D0 r v14 [mouse] Card type: P1TV
2015/10/13 08:09:44 14181D0 r v14 [mouse] Rom version: 20AA
2015/10/13 08:09:44 14181D0 r v14 [mouse] Credit available on card: 0 euro
2015/10/13 08:09:44 14181D0 r v14 [mouse] Extended 4C detected
2015/10/13 08:09:44 14181D0 r v14 [mouse] FuseByte: 25
2015/10/13 08:09:44 14181D0 r v14 [mouse] Region Code: 00BO0102
2015/10/13 08:09:44 14181D0 r v14 [mouse] Country Code: DEU
2015/10/13 08:09:45 14181D0 r v14 [mouse] Pincode read: 1010
2015/10/13 08:09:45 14181D0 r v14 [mouse] PCB settings: FF FF FF FF
2015/10/13 08:09:45 14181D0 r v14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/10/13 08:09:45 14181D0 r v14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/10/13 08:09:45 14181D0 r v14 [mouse] ready for requests
2015/10/13 08:09:45 14181D0 r v14 [mouse] found card system videoguard2
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] card detected
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: b60d, expiry date: 2015/09/01-00:01:04
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 007b, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 007d, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 0081, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 008e, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00c0, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00c7, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00c8, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00c9, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00ca, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00e4, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00e5, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00f3, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00fa, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:45 14181D0 r v14 [videoguard2] tier: 00ff, expiry date: 2015/11/13-00:00:00
2015/10/13 08:09:47 0 s init for all local cards done
2015/10/13 08:09:47 0 s anti cascading disabled
2015/10/13 08:09:49 142CA60 c client connected to 13000 port
2015/10/13 08:09:49 142CA60 c encrypted newcamd:13000-client 192.168.178.6 granted (XXXX, au=on (1 reader))
2015/10/13 08:09:49 142CA60 c user XXXX authenticated successfully (ACamd)
2015/10/13 08:09:49 142CA60 c AU enabled for user XXXX on reader v14
2015/10/13 08:09:49 142CA60 c XXXX (098C/00F2/98): found (85 ms) by v14
2015/10/13 08:09:50 142CA60 c XXXX (098C/00F2/98): cache1 (0 ms) by v14
2015/10/13 08:09:56 142CA60 c XXXX (098C/00F2/98): found (74 ms) by v14

mein LiveLog

Spoiler

1970/01/01 02:04:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10663 (arm-v7a8v3r1-linux-gnueabi-libusb)
1970/01/01 02:04:38 0 s (main) System name = Linux
1970/01/01 02:04:38 0 s (main) Host name = (none)
1970/01/01 02:04:38 0 s (main) Release = 2.6.35.13
1970/01/01 02:04:38 0 s (main) Version = #1 SMP PREEMPT Fri May 4 10:43:02 KST 2012
1970/01/01 02:04:38 0 s (main) Machine = armv7l
1970/01/01 02:04:38 0 s (main) The current system time is smaller than the build date (May 23 2015). Waiting up to 60 seconds for time to correct
1970/01/01 02:05:39 0 s (main) Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
1970/01/01 02:05:39 0 s (main) creating pidfile /dtv/oscam.pid with pid 1510
1970/01/01 02:05:39 0 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
1970/01/01 02:05:39 0 s (main) signal handling initialized
1970/01/01 02:05:39 0 s (led) LED support is not active. Can't detect machine type.
1970/01/01 02:05:39 0 s (reader) v14 [cccam] creating thread for device XXXX.de
1970/01/01 02:05:39 0 s (stat) loadbalancer: file /mtd_rwcommon/oscam/stat not found
1970/01/01 02:05:39 0 s (emmcache) loading emmcache disabled since no reader is using it!
1970/01/01 02:05:39 0 s (emmcache) loading emmstats disabled since no reader is using it!
1970/01/01 02:05:39 0 s (anticasc) anti cascading disabled
1970/01/01 02:05:39 1294A8 c (client) plain dvbapi-client granted (andy, au=off)
1970/01/01 02:05:39 1294A8 c (dvbapi) dvbapi channelcache loaded from /mtd_rwcommon/oscam/oscam.ccache
1970/01/01 02:05:39 1294A8 c (dvbapi) Using SamyGO dvbapi v0.1, oscam patched by pehedima
1970/01/01 02:05:39 1294A8 c (dvbapi) PMT6: Trying connect to enigma CA PMT listen socket...
1970/01/01 02:05:39 1294A8 c (dvbapi) PMT6 CA PMT Server connected on fd 7!
1970/01/01 02:05:39 126800 h (webif) webif: decompressed 159509 bytes back into 379636 bytes
1970/01/01 02:05:39 126800 h (webif) HTTP Server running. ip=0.0.0.0 port=8085
1970/01/01 02:05:39 128B48 p (reader) XXXX.de: resolved ip=87.xxx.107.xxxx
1970/01/01 02:05:39 128B48 p (reader) v14 [cccam] connecting to XXXX.de:12000
1970/01/01 02:05:39 1294A8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
1970/01/01 02:05:39 1294A8 c (dvbapi) Demuxer 0 serving srvid 2EF4 (FFFE:2EF4 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
1970/01/01 02:05:39 128B48 p (reader) v14 [cccam] proxy initialized, server XXXX.de:12000
1970/01/01 02:06:19 1294A8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
1970/01/01 02:06:19 1294A8 c (dvbapi) Demuxer 0 serving srvid 2F1C (FFFE:2F1C unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
1970/01/01 02:06:20 1294A8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
1970/01/01 02:06:20 1294A8 c (dvbapi) Demuxer 0 serving srvid 2EF4 (FFFE:2EF4 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1702 ECM_PID: 044C PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1833 ECM_PID: 044D PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09C4 ECM_PID: 044E PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 1837 ECM_PID: 044F PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 4 CAID: 0648 ECM_PID: 0452 PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 5 CAID: 098C ECM_PID: 0453 PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 ecmpid 6 CAID: 0650 ECM_PID: 0454 PROVID: 000000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 found 7 ECMpids and 3 STREAMpids in PMT
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 serving srvid 2EFE (1702:2EFE unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000
1970/01/01 02:06:51 1294A8 c (dvbapi) Demuxer 0 trying to descramble PID 5 CAID 098C PROVID 000000 ECMPID 0453 ANY CHID PMTPID 0000 VPID 012D
1970/01/01 02:06:51 1294A8 c (ecm) XXXX (098C&000000/08FD/2EFE/98:AB3469F1D690CFD9ED80384AF7C67AD2): found (164 ms) by v14
1970/01/01 02:06:53 1294A8 c (ecm) XXXX (098C&000000/08FD/2EFE/98:36F355637814CFE31FCB22CD0CEAA797): found (169 ms) by v14
1970/01/01 02:06:58 1294A8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
1970/01/01 02:06:58 1294A8 c (dvbapi) Demuxer 0 serving srvid 2EF4 (FFFE:2EF4 unknown) on adapter 0000 camask 0001 index 0000 pmtpid 0000