OSCAM r10982 - HD02 - not found...

[cleem]

Hallo DEB,
ich hoffe ich schreibe im richtigen Bereich
seit heute ist meine HD02 dunkel...
... im log steht:

2016/02/13 19:23:38 48FE4E1E c      (ecm) user  (1843@000000/0000/EF74/89:5FE522B80793F4FB01340B80F48050EC): not found  (309 ms) by hd+ - SAT.1 HD

im Reader:

tier    1843    008011    0000000000000066    00000000    2015-09-08    2016-09-08    1843@008011 unknown
tier    1843    008011    0000000000000067    00000000    2010-01-19    2010-01-20    1843@008011 unknown

hat sich bei HD+ was geändert? Habe ich ein AU verpasst?

Wo könnte ich mit forschen beginnen?

LG
Clem

 

[supraracer]

AW: OSCAM r10982 - HD02 - not found...

Reader neu starten und hier mal das Log posten. Dazu am besten noch deine kompletten Configs im Spoiler.

-supraracer

 

[Hunchback1000]

AW: OSCAM r10982 - HD02 - not found...

Hey,

du musst global EMM auf die Karte schreiben.

Als Kurzlösung kannst du die Karte mal ein paar Sekunden mit Scam direkt im Receiver befeuern und dann gucken wir uns deine configs an.

MfG
Hunch

 

[dodo83]

AW: OSCAM r10982 - HD02 - not found...

Habe ich ein AU verpasst?

könnte sein...
wie ist das VALID TO Datum?
stimmen die AU Einstellungen?

 

[cleem]

AW: OSCAM r10982 - HD02 - not found...

Hallo und Danke für die schnellen Antworten!

Beim Restart des Readers steht im Log folgendes:

[LIST]
[*]2016/02/13 19:59:18 09E4DDC6 h   (reader) hd+ [nagra] Restarting reader 
[*]2016/02/13 19:59:18 09E4DDC6 h   (reader) hd+ [nagra] creating thread for device /dev/hdplus 
[*]2016/02/13 19:59:19 1B6027E2 r   (reader) hd+ [nagra] Buffers readed  0 bytes total time_us 75242 
[*]2016/02/13 19:59:19 1B6027E2 r   (reader) hd+ [nagra] Flush readed byte Nr 1 value 03 time_us 5763 
[*]2016/02/13 19:59:19 1B6027E2 r   (reader) hd+ [nagra] Buffers readed  1 bytes total time_us 81183 
[*]2016/02/13 19:59:19 1B6027E2 r   (reader) hd+ [nagra] Reader initialized (device=/dev/hdplus, detect=cd, mhz=357, cardmhz=357) 
[*]2016/02/13 19:59:20 1B6027E2 r   (reader) hd+ [nagra] card detected 
[*]2016/02/13 19:59:20 1B6027E2 r   (reader) hd+ [mouse] Buffers readed  0 bytes total time_us 75281 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] Setting baudrate to 111600 bps 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] Calculated work ETU is 8.96 us reader mhz = 357 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] Buffers readed  0 bytes total time_us 75327 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz) 
[*]2016/02/13 19:59:21 1B6027E2 r   (reader) hd+ [mouse] Card responded ok for ifsd request of 160 
[*]2016/02/13 19:59:22 1B6027E2 r   (reader) hd+ [mouse] detect native nagra card 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [mouse] ready for requests 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [mouse] found card system nagra 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] ROM:    D N A S P 1 8 0 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] REV:    M e r 0 0 0 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] SER:    ############ 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] CAID:   1843 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] Prv.ID: 00 00 34 11 (sysid) 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] Prv.ID: 00 00 00 00 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] IRD ID: ############ 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] active to: 2016/02/12 11:59 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] ----------------------------------------- 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] |id  |tier    |valid from  |valid to    | 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] +----+--------+------------+------------+ 
[*]2016/02/13 19:59:23 1B6027E2 r   (reader) hd+ [nagra] |8011|0066    |2015/09/08  |2016/09/08  | 
[*]2016/02/13 19:59:24 1B6027E2 r   (reader) hd+ [nagra] |8011|0067    |2010/01/19  |2010/01/20  | 
[*]2016/02/13 19:59:24 1B6027E2 r   (reader) hd+ [nagra] ----------------------------------------- 
[/LIST]

Spoiler

oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10982
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /var/log/oscam.log
usrfileflag                   = 1
nice                          = -1
maxlogsize                    = 2480
preferlocalcards              = 2
usrfile                       = /var/log/oscamusr.log
emmlogdir                     = /usr/local/etc/emm/

[cache]

[cccam]
port                          = 63000
nodeid                        = 28EB13DA10B014F4
version                       = 2.3.0
reshare                       = 2
stealth                       = 1

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
listen_port                   = 2000
user                          = vdr
read_sdt                      = 2
boxtype                       = pc

[monitor]
port                          = 988
aulow                         = 120
monlevel                      = 4
hideclient_to                 = 15

[webif]
httpport                      = 80
httpuser                      = user
httppwd                       = password
httprefresh                   = 10
httpallowed                   = 0.0.0.0-255.255.255.0
aulow                         = 120
hideclient_to                 = 15

oscam.user

[account]
user                          = user
pwd                           = password
au                            = hd+
group                         = 1,2,3

[account]
user                          = vdr
au                            = hd+
group                         = 1,3

oscam.server

[reader]
label                         = hd+
protocol                      = mouse
device                        = /dev/hdplus
caid                          = 1843
boxkey                        = abc
rsakey                        = abc
detect                        = cd
nagra_read                    = 1
group                         = 1
emmcache                      = 1,3,10,0

Reader-Config der ClientBox:

[reader]
label                         = OSCAM-PROXY
description                   = OSCAM-PROXY
protocol                      = cccam
device                        = 172.21.1.118,63000
user                          = user
password                      = password
inactivitytimeout             = 30
caid                          = 1843
group                         = 1
cccversion                    = 2.1.1
ccckeepalive                  = 1

Also das Valid to Datum für den aktuellen Tier sieht gut aus (2016/09/08).
Welche AU-Settings sind relevant?

Gruß und Dank
Clem

PS: Scheinbar war ich im richtigen Forum?

 

[supraracer]

AW: OSCAM r10982 - HD02 - not found...

Dein AU funktioniert nicht:
2016/02/13 19:59:23 1B6027E2 r (reader) hd+ [nagra] active to: 2016/02/12 11:59

-supraracer

 

[cleem]

AW: OSCAM r10982 - HD02 - not found...

..... super danke!
Habe einen OSCAM auf ner UNIBOX HD Eco+ als Client - was muss ich einstellen?

Habe meine Server-Konfig oben angehängt

 

[dodo83]

AW: OSCAM r10982 - HD02 - not found...

• 2016/02/13 19:59:23 1B6027E2 r (reader) hd+ [nagra] active to: 2016/02/12 11:59

sorry,
im WebIF wenn du auf den Reader gehst steht VALID TO, im Log ACTIVE TO....

poste mal bitte die Configs, SERVER und CLIENT

 

[cleem]

AW: OSCAM r10982 - HD02 - not found...

Hey, hier die Configs:

Spoiler

oscam.config

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r10982
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt

[global]
logfile                       = /var/log/oscam.log
usrfileflag                   = 1
nice                          = -1
maxlogsize                    = 2480
preferlocalcards              = 2
usrfile                       = /var/log/oscamusr.log
emmlogdir                     = /usr/local/etc/emm/

[cache]

[cccam]
port                          = 63000
nodeid                        = 28EB13DA10B014F4
version                       = 2.3.0
reshare                       = 2
stealth                       = 1

[dvbapi]
enabled                       = 1
au                            = 1
pmt_mode                      = 0
listen_port                   = 2000
user                          = vdr
read_sdt                      = 2
boxtype                       = pc

[monitor]
port                          = 988
aulow                         = 120
monlevel                      = 4
hideclient_to                 = 15

[webif]
httpport                      = 80
httpuser                      = user
httppwd                       = password
httprefresh                   = 10
httpallowed                   = 0.0.0.0-255.255.255.0
aulow                         = 120
hideclient_to                 = 15

oscam.user

[account]
user                          = user
pwd                           = password
au                            = hd+
group                         = 1,2,3

[account]
user                          = vdr
au                            = hd+
group                         = 1,3

oscam.server

[reader]
label                         = hd+
protocol                      = mouse
device                        = /dev/hdplus
caid                          = 1843
boxkey                        = abc
rsakey                        = abc
detect                        = cd
nagra_read                    = 1
group                         = 1
emmcache                      = 1,3,10,0

Reader-Config der ClientBox:

[reader]
label                         = OSCAM-PROXY
description                   = OSCAM-PROXY
protocol                      = cccam
device                        = 172.21.1.118,63000
user                          = user
password                      = password
inactivitytimeout             = 30
caid                          = 1843
group                         = 1
cccversion                    = 2.1.1
ccckeepalive                  = 1

 

[dodo83]

AW: OSCAM r10982 - HD02 - not found...

restliche Configs vom Client: oscam.conf und oscam.user

was ist der Server?

 

[schumi2009]

AW: OSCAM r10982 - HD02 - not found...

Hallo,
schreib mal im oscam.reader diesen Eintrag rein:
ident = 1843:000000,003411,008011

Und starte oscam neu...

 

[cleem]

bitte gib mir en bisschen, hab grad ein problem mit meiner unibox - die will nicht mehr starten



Hi Schumi, meinst du am Server oder am Client?
LG
Clem

 

[dodo83]

AW: OSCAM r10982 - HD02 - not found...

@schumi2009

wozu soll das gut sein im Bezug auf EMM ??

@cleem
keine eile.....

 

[cleem]

AW: OSCAM r10982 - HD02 - not found...

....
so hier die Client-Config der Unibox:

Spoiler

oscam.conf

[global]

[cccam]
port                           = 12000
reshare                        = 0
version                        = 2.3.0

[dvbapi]
enabled                       = 1
au                            = 1
boxtype                       = dreambox
user                          = dvbapiau

[webif]
httpport                      = 83
httphelplang                  = de
httprefresh                   = 10
httppollrefresh                   = 10
httpallowed                   = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients           = 0
httpreadonly                  = 0
httpsavefullcfg               = 0

oscam.user

[account]
user                          = dvbapiau
pwd                           = 
group                         = 1,2,3,4,5
uniq                          = 3
au                            = 1

oscam.server

[reader]
label                         = OSCAM-PROXY
description                   = OSCAM-PROXY
protocol                      = cccam
device                        = 172.21.1.118,63000
user                          = user
password                      = password
inactivitytimeout             = 30
caid                          = 1843
group                         = 1
cccversion                    = 2.1.1
ccckeepalive                  = 1

Gruß
Clem

 

[dodo83]

AW: OSCAM r10982 - HD02 - not found...

passt eigentlich bezüglich des AU,
was ist der Server?
welche OScam Versionen nutzt du?