Hallo,
ich bekomme einfach nicht meine neu erworbene orf karte ans laufen. Einen normalen computer mit smartmouse2 direkt am usb-port tvheadend läuft, öffentliche programme wie zB prosieben austria kann ich problemlos anschauen, nur bei den verschlüsselten happerts. orf1 über antenne funktioniert auch problemlos (ist ja auch nicht verschlüsselt
)
Ich habe schon wirklich sehr viel probiert, vielleicht entdeckt ja einer von euch einen Fehler ....
Also ich habe folgende config files.
oscam.conf
oscam.server
oscam.user
oscam.services
log von oscam
DANKE derweil für eure Hilfe
lg Martin
Update:: Für alle die auch so ein ähnliches Problem haben, die orf caid is 0D95 und nicht 0D98 wie fälschlicher weise behauptet wird (für neuere Karten)
Habe auch noch alle anderen reader herausgelöscht und nun funktioniert es
Ach ja, in der oscam.server muss unter services einfach nur orf stehen ohne Rufzeichen oder dergleichen
ich bekomme einfach nicht meine neu erworbene orf karte ans laufen. Einen normalen computer mit smartmouse2 direkt am usb-port tvheadend läuft, öffentliche programme wie zB prosieben austria kann ich problemlos anschauen, nur bei den verschlüsselten happerts. orf1 über antenne funktioniert auch problemlos (ist ja auch nicht verschlüsselt
) Ich habe schon wirklich sehr viel probiert, vielleicht entdeckt ja einer von euch einen Fehler ....
Also ich habe folgende config files.
oscam.conf
[global]
logfile = stdout
nice = -1
preferlocalcards = 1
[cache]
[newcamd]
port = 15000@0000:000D95
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
user = emka81
boxtype = pc
listen_port = 9000
#user = tvheadend
[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = 8989
httprefresh = 5
httpallowed = 192.168.1.1-192.168.1.10,127.0.0.1
aulow = 120
hideclient_to = 15
logfile = stdout
nice = -1
preferlocalcards = 1
[cache]
[newcamd]
port = 15000@0000:000D95
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 4
request_mode = 1
user = emka81
boxtype = pc
listen_port = 9000
#user = tvheadend
[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15
[webif]
httpport = 8989
httprefresh = 5
httpallowed = 192.168.1.1-192.168.1.10,127.0.0.1
aulow = 120
hideclient_to = 15
[reader]
label = cccam
protocol = cccam
device = 127.0.0.1,12000
user = emka81
password = emka81
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1
[reader]
label = keyserver
protocol = camd35
device = 127.0.0.1,20248
user = emka81
password = emka81
#caid = 0D95
group = 2
[reader]
label = myesasymouse2
protocol = mouse
device = /dev/ttyUSB0
services = !orfcw
#caid = 0648
caid = 0d98
#boxkey = 1xxx8
#rsakey = DxxxD
#force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
label = cccam
protocol = cccam
device = 127.0.0.1,12000
user = emka81
password = emka81
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccwantemu = 1
ccckeepalive = 1
[reader]
label = keyserver
protocol = camd35
device = 127.0.0.1,20248
user = emka81
password = emka81
#caid = 0D95
group = 2
[reader]
label = myesasymouse2
protocol = mouse
device = /dev/ttyUSB0
services = !orfcw
#caid = 0648
caid = 0d98
#boxkey = 1xxx8
#rsakey = DxxxD
#force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
[account]
user = emka81
pwd = emka81
caid = 0D95
au = 1
group = 1,2
user = emka81
pwd = emka81
caid = 0D95
au = 1
group = 1,2
[orfcw]
caid = 0D95
provid = 000000,000004
srvid = 4E27
srvid = 32F,1330,1334,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,332D,33A5,33A7,33AC,33F5,33F6,
33F7,33F8,33F9,33FA,33FB,33FC,33FD,4E27
caid = 0D95
provid = 000000,000004
srvid = 4E27
srvid = 32F,1330,1334,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,332D,33A5,33A7,33AC,33F5,33F6,
33F7,33F8,33F9,33FA,33FB,33FC,33FD,4E27
12:55:17 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10991 (x86_64-linux-gnu-ssl-libusb)
12:55:17 00000000 s (main) System name = Linux
12:55:17 00000000 s (main) Host name = cineraum
12:55:17 00000000 s (main) Release = 3.16-2-amd64
12:55:17 00000000 s (main) Version = #1 SMP Debian 3.16.3-2 (2014-09-20)
12:55:17 00000000 s (main) Machine = x86_64
12:55:17 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6840
12:55:17 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
12:55:17 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:55:17 00000000 s (main) signal handling initialized
12:55:17 00000000 s (net) monitor: initialized (fd=4, port=988)
12:55:17 00000000 s (net) newcamd: initialized (fd=5, port=15000)
12:55:17 00000000 s (net) -> CAID: 0000 PROVID: 000D95
12:55:17 00000000 s (reader) cccam [cccam] creating thread for device 127.0.0.1
12:55:17 00000000 s (reader) keyserver [cs357x] creating thread for device 127.0.0.1
12:55:17 00000000 s (reader) myesasymouse2 [mouse] creating thread for device /dev/ttyUSB0
12:55:17 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
12:55:17 00000000 s (main) waiting for local card init
12:55:17 10AC3B08 p (reader) keyserver [cs357x] proxy 127.0.0.1:20248
12:55:17 5FC54F44 p (reader) 127.0.0.1: resolved ip=127.0.0.1
12:55:17 5FC54F44 p (reader) cccam [cccam] connecting to 127.0.0.1:12000
12:55:17 3C45BE4B h (webif) webif: decompressed 156447 bytes back into 377264 bytes
12:55:17 3C45BE4B h (webif) HTTP Server running. ip=0.0.0.0 port=8989
12:55:17 10AC3B08 p (reader) keyserver [cs357x] proxy initialized, server 127.0.0.1:20248
12:55:17 5FC54F44 p (reader) cccam [cccam] proxy initialized, server 127.0.0.1:12000
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75126
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 1 value 3b time_us 5048
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 2 value 78 time_us 987
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 3 value 12 time_us 951
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 4 value 00 time_us 976
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 5 value 00 time_us 2002
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 6 value 54 time_us 974
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 7 value c4 time_us 998
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 8 value 03 time_us 1009
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 9 value 00 time_us 2020
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 10 value 8f time_us 939
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 11 value f1 time_us 973
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 12 value 90 time_us 998
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 13 value 00 time_us 1972
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 13 bytes total time_us 95173
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
12:55:18 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:18 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75154
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75138
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Setting baudrate to 32258 bps
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Calculated work ETU is 31.00 us reader mhz = 600
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
12:55:20 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:20 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks
12:55:21 75952F06 r (reader) myesasymouse2 [mouse] card system not supported
12:55:21 75952F06 r (reader) myesasymouse2 [mouse] Normal mode failed, reverting to Deprecated Mode
12:55:22 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75106
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75122
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] providers: 4 (04,08,0C,10)
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] found card system cryptoworks
12:55:24 75952F06 r (reader) myesasymouse2 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 000D, date: 2015/09/11 - 2015/10/11, name: Product 000D
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 001D, date: 2015/09/11 - 2015/10/11, name: Product 001D
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 0031, date: 2015/09/11 - 2015/10/11, name: Product 0031
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] ready for requests
12:55:26 00000000 s (main) init for all local cards done
12:55:26 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
12:55:26 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
12:55:26 00000000 s (anticasc) anti cascading disabled
12:55:26 3F737B53 c (client) plain dvbapi-client granted (emka81, au=auto (3 reader))
12:55:26 3F737B53 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
12:55:26 3F737B53 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
12:55:17 00000000 s (main) System name = Linux
12:55:17 00000000 s (main) Host name = cineraum
12:55:17 00000000 s (main) Release = 3.16-2-amd64
12:55:17 00000000 s (main) Version = #1 SMP Debian 3.16.3-2 (2014-09-20)
12:55:17 00000000 s (main) Machine = x86_64
12:55:17 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 6840
12:55:17 00000000 s (config) services reloaded: 0 services freed, 1 services loaded, rejected 0
12:55:17 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:55:17 00000000 s (main) signal handling initialized
12:55:17 00000000 s (net) monitor: initialized (fd=4, port=988)
12:55:17 00000000 s (net) newcamd: initialized (fd=5, port=15000)
12:55:17 00000000 s (net) -> CAID: 0000 PROVID: 000D95
12:55:17 00000000 s (reader) cccam [cccam] creating thread for device 127.0.0.1
12:55:17 00000000 s (reader) keyserver [cs357x] creating thread for device 127.0.0.1
12:55:17 00000000 s (reader) myesasymouse2 [mouse] creating thread for device /dev/ttyUSB0
12:55:17 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
12:55:17 00000000 s (main) waiting for local card init
12:55:17 10AC3B08 p (reader) keyserver [cs357x] proxy 127.0.0.1:20248
12:55:17 5FC54F44 p (reader) 127.0.0.1: resolved ip=127.0.0.1
12:55:17 5FC54F44 p (reader) cccam [cccam] connecting to 127.0.0.1:12000
12:55:17 3C45BE4B h (webif) webif: decompressed 156447 bytes back into 377264 bytes
12:55:17 3C45BE4B h (webif) HTTP Server running. ip=0.0.0.0 port=8989
12:55:17 10AC3B08 p (reader) keyserver [cs357x] proxy initialized, server 127.0.0.1:20248
12:55:17 5FC54F44 p (reader) cccam [cccam] proxy initialized, server 127.0.0.1:12000
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75126
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 1 value 3b time_us 5048
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 2 value 78 time_us 987
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 3 value 12 time_us 951
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 4 value 00 time_us 976
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 5 value 00 time_us 2002
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 6 value 54 time_us 974
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 7 value c4 time_us 998
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 8 value 03 time_us 1009
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 9 value 00 time_us 2020
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 10 value 8f time_us 939
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 11 value f1 time_us 973
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 12 value 90 time_us 998
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Flush readed byte Nr 13 value 00 time_us 1972
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 13 bytes total time_us 95173
12:55:17 75952F06 r (reader) myesasymouse2 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=600)
12:55:18 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:18 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75154
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75138
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Setting baudrate to 32258 bps
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Calculated work ETU is 31.00 us reader mhz = 600
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75118
12:55:19 75952F06 r (reader) myesasymouse2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
12:55:20 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:20 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks
12:55:21 75952F06 r (reader) myesasymouse2 [mouse] card system not supported
12:55:21 75952F06 r (reader) myesasymouse2 [mouse] Normal mode failed, reverting to Deprecated Mode
12:55:22 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75106
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] ATR: 3B 78 12 00 00 54 C4 03 00 8F F1 90 00
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] Buffers readed 0 bytes total time_us 75122
12:55:23 75952F06 r (reader) myesasymouse2 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 6.00 MHz (specified in reader->mhz)
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] card detected
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] type: CryptoWorks, caid: 0D95, ascii serial: #########, hex serial: ##########
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] issuer: CryptoWorks, id: 04, bios: v3, pin: unknown, mfid: 3F00
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] providers: 4 (04,08,0C,10)
12:55:24 75952F06 r (reader) myesasymouse2 [mouse] found card system cryptoworks
12:55:24 75952F06 r (reader) myesasymouse2 [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 1, id: 04, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 000D, date: 2015/09/11 - 2015/10/11, name: Product 000D
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 2, id: 08, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 001D, date: 2015/09/11 - 2015/10/11, name: Product 001D
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 3, id: 0C, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] provider: 4, id: 10, name: Operator: FFFF
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] chid: 0031, date: 2015/09/11 - 2015/10/11, name: Product 0031
12:55:25 75952F06 r (reader) myesasymouse2 [cryptoworks] ready for requests
12:55:26 00000000 s (main) init for all local cards done
12:55:26 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 1 ms
12:55:26 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
12:55:26 00000000 s (anticasc) anti cascading disabled
12:55:26 3F737B53 c (client) plain dvbapi-client granted (emka81, au=auto (3 reader))
12:55:26 3F737B53 c (dvbapi) dvbapi channelcache loaded from /usr/local/etc/oscam.ccache
12:55:26 3F737B53 c (dvbapi) Using TCP listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
DANKE derweil für eure Hilfe
lg Martin
Update:: Für alle die auch so ein ähnliches Problem haben, die orf caid is 0D95 und nicht 0D98 wie fälschlicher weise behauptet wird (für neuere Karten)
Habe auch noch alle anderen reader herausgelöscht und nun funktioniert es
Ach ja, in der oscam.server muss unter services einfach nur orf stehen ohne Rufzeichen oder dergleichen
Zuletzt bearbeitet:
