oscam mit v14 in ReinerSCT Reader: card system not supported

[Eldarik]

Hi,

Oscam ist die oscam-svn aus dem Ubuntu ppa. Sollte also aktuell sein.
oscam-svn - 1.20.9254+svn201505071715~ubuntu15.04.1
V14 ist neu und noch nicht freigeschaltet.

Ich erhalte nach dem oscam Start die Fehlermeldung card system not supported und THIS WAS A FAILED START ATTEMPT.
Soweit ich das verstehe bedeutet das, dass Oscam mit der Karte nicht sprechen wird? Sie also auch nicht freigeschaltet werden wird.

Kann das am Cardreader liegen? Ist für diesen Zweck ja nicht das Standardmodell.
log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Thu May 7 23:08:08 2015
-------------------------------------------------------------------------------
2015/05/07 23:08:08 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r0 (x86_64-linux-gnu)
2015/05/07 23:08:08 0 s (main) System name = Linux
2015/05/07 23:08:08 0 s (main) Host name = abc-media
2015/05/07 23:08:08 0 s (main) Release = 3.13.0-39-generic
2015/05/07 23:08:08 0 s (main) Version = #66-Ubuntu SMP Tue Oct 28 13:30:27 UTC 2014
2015/05/07 23:08:08 0 s (main) Machine = x86_64
2015/05/07 23:08:08 0 s (main) creating pidfile /var/run/oscam-svn.pid with pid 9450
2015/05/07 23:08:08 0 s (config) services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/05/07 23:08:08 0 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/05/07 23:08:08 0 s (main) signal handling initialized
2015/05/07 23:08:08 0 s (config) 775 service-id's loaded in 1 ms
2015/05/07 23:08:08 0 s (net) newcamd: initialized (fd=6, port=30000)
2015/05/07 23:08:08 0 s (net) -> CAID: 098C PROVID: 000000
2015/05/07 23:08:08 0 s (reader) sky [pcsc] creating thread for device 0
2015/05/07 23:08:08 0 s (stat) loadbalancer: can't read from file /tmp/oscam-svn/stat
2015/05/07 23:08:08 0 s (main) waiting for local card init
2015/05/07 23:08:08 17972F0 r (reader) sky [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2015/05/07 23:08:08 F80008C0 h (webif) webif: decompressed 159535 bytes back into 380152 bytes
2015/05/07 23:08:08 F80008C0 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/05/07 23:08:09 17972F0 r (reader) sky [pcsc] Error getting card status.
2015/05/07 23:08:10 0 s (main) init for all local cards done
2015/05/07 23:08:10 0 s (emmcache) loaded 0 emmcache records from /etc/oscam-svn/oscam.emmcache in 0 ms
2015/05/07 23:08:10 0 s (emmcache) loaded 0 emmstat records from /etc/oscam-svn/oscam.emmstat in 0 ms
2015/05/07 23:08:10 0 s (anticasc) anti cascading disabled
2015/05/07 23:08:10 17972F0 r (reader) sky [pcsc] PCSC was opened with handle: 702923183
2015/05/07 23:08:10 17972F0 r (reader) sky [pcsc] card detected
2015/05/07 23:08:12 17972F0 r (reader) sky [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/07 23:08:14 17972F0 r (reader) sky [pcsc] card system not supported
2015/05/07 23:08:14 17972F0 r (reader) sky [pcsc] Normal mode failed, reverting to Deprecated Mode
2015/05/07 23:08:15 17972F0 r (reader) sky [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/07 23:08:17 17972F0 r (reader) sky [pcsc] card system not supported
2015/05/07 23:08:17 17972F0 r (reader) sky [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/07 23:08:17 17972F0 r (reader) sky [pcsc] card initializing error
2015/05/08 00:38:37 F80008C0 h (webif) Reader sky restarted by WebIF from
2015/05/08 00:38:38 E4001090 r (reader) sky [pcsc] creating thread for device 0
2015/05/08 00:38:38 E4001CB0 r (reader) sky [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2015/05/08 00:38:39 E4001CB0 r (reader) sky [pcsc] PCSC was opened with handle: 1659101834
2015/05/08 00:38:39 E4001CB0 r (reader) sky [pcsc] card detected
2015/05/08 00:38:39 E4001CB0 r (reader) sky [pcsc] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2015/05/08 00:38:40 1798630 c (ecm) abc (098C&000000/01FB/0017/98:6BCAA1B91AE5F94A26943206DBED11C1): rejected group (0 ms) (no matching reader)
2015/05/08 00:38:40 E4001CB0 r (reader) sky [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 00:38:41 E4001CB0 r (reader) sky [pcsc] passed history check
2015/05/08 00:38:41 E4001CB0 r (reader) sky [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 00:38:41 E4001CB0 r (reader) sky [pcsc] forced to NDS2
2015/05/08 00:38:41 E4001CB0 r (reader) sky [pcsc] write to cardreader
2015/05/08 00:38:41 E4001CB0 r (reader) D0 74 01 80 01
2015/05/08 00:38:42 E4001CB0 r (reader) sky [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 00:38:42 E4001CB0 r (reader) sky [pcsc] passed history check
2015/05/08 00:38:42 E4001CB0 r (reader) sky [pcsc] card system not supported
2015/05/08 00:38:42 E4001CB0 r (reader) sky [pcsc] Normal mode failed, reverting to Deprecated Mode
2015/05/08 00:38:44 E4001CB0 r (reader) sky [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 00:38:45 E4001CB0 r (reader) sky [pcsc] passed history check
2015/05/08 00:38:45 E4001CB0 r (reader) sky [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 00:38:45 E4001CB0 r (reader) sky [pcsc] forced to NDS2
2015/05/08 00:38:45 E4001CB0 r (reader) sky [pcsc] write to cardreader
2015/05/08 00:38:45 E4001CB0 r (reader) D0 74 01 80 01
2015/05/08 00:38:46 E4001CB0 r (reader) sky [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 00:38:46 E4001CB0 r (reader) sky [pcsc] passed history check
2015/05/08 00:38:46 E4001CB0 r (reader) sky [pcsc] card system not supported
2015/05/08 00:38:46 E4001CB0 r (reader) sky [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/08 00:38:46 E4001CB0 r (reader) sky [pcsc] card initializing error

oscam.conf:

Spoiler

[global]
nice = -1
WaitForCards = 1

# logging
maxlogsize = 10240
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
emmlogdir = /var/log/oscam/emm

[newcamd]
key = 000102030405060708090A0B0C0D
port = 30000@098C:000000;
keepalive = 1

oscam.server:

Spoiler

[reader]
label = sky
protocol = pcsc
device = 0
caid = 098C
boxid = 12345678
ecmwhitelist = 098C:98,9B,97,57
detect = cd
autospeed = 1
#mhz = 500
#cardmhz = 500
#ident = 098C:000000
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

oscam.user:

Spoiler

[account]
user = abc
pwd = def
#monlevel = 0
#uniq = 1
group = 1
au = sky
#au = 1
#services = services1
#betatunnel = 0300.FFFF:0100,0400.FFFF:0100
#ident = 0100:000000
caid = 098C

Änderungen an der Taktung ändern an dem Fehler nichts.
Auch wird beim Verbinden des Clients AU deaktiviert.
Für Hilfe wär ich sehr dankbar

edit: Debug-Level 4 Info im Log ergänzt

 

[dodo83]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

wie ist der Reader den aktuell eingestellt?
bzw. wie kann man den einstellen?

 

[supraracer]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Poste mal die Ausgabe von Files -> oscam.version (WebIF).
Welches Modell von Reiner hast du da genau?

-supraracer

 

[Eldarik]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Der Reader ist ein cyberjack RFID standard.
Einzustellen ist bei dem Gerät nichts.
Ich wollte damit eigentlich nur testen, ob die Karte gepairt ist oder nicht, bevor ich mir einen extra Reader dafür zuleg.

oscam.version (webif)

Spoiler

Unix starttime: 1431048222
Starttime: 08.05.2015 03:23:42
Version: oscam-1.20-unstable_svn-r0
Compiler: x86_64-linux-gnu
Box type: generic (generic)
ConfigDir: /etc/oscam-svn/
WebifPort: 8888

Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: yes
SSL support: yes
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Irdeto guessing: yes
Anti-cascading support: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: yes
IPv6 support: no

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: no
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: yes
constant CW: yes
Pandora: yes
ghttp: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: yes
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

Output von pcsc_scan:

Spoiler

Fri May 8 13:14:13 2015
Reader 0: REINER SCT cyberJack RFID standard (9794057650) 00 00
Card state: Card inserted,
ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
+ TS = 3F --> Inverse Convention
+ T0 = FD, Y(1): 1111, K: 13 (historical bytes)
TA(1) = 13 --> Fi=372, Di=4, 93 cycles/ETU
43010 bits/s at 4 MHz, fMax for Fi = 5 MHz => 53763 bits/s
TB(1) = 25 --> Programming Param P: 5 Volts, I: 1 milliamperes
TC(1) = 02 --> Extra guard time: 2
TD(1) = 50 --> Y(i+1) = 0101, Protocol T = 0
-----
TA(2) = 80 --> Protocol to be used in spec mode: T=0 - Unable to change - defined by interface bytes
TC(2) = 0F --> Work waiting time: 960 x 15 x (Fi/F)
+ Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
Category indicator byte: 41 (proprietary format)

Possibly identified card (using /usr/share/pcsc/smartcard_list.txt):
NONE

 

[supraracer]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Schaut eigentlich gut aus, mal ein bisschen mit den Werten gespielt?

Spoiler

autospeed = 0
mhz = 358
cardmhz = 358

oder

autospeed = 0
mhz = 357
cardmhz = 357

-supraracer

 

[Eldarik]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Ja schon verschiedene settings versucht.
Man findet die Kombination v14+pcsc allerdings recht selten, die Kombination mit einem Class 2 Reader logischerweise noch seltener., deshalb fehlt mir etwas der Ansatzpunkt.
Die sonst üblichen Werte brachten alle keine Veränderung.

 

[pehedima]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Setze mal bitte autospeed = 0 und reboote den gesamten Rechner.

Dann neues Logfile posten.

Welche Readereinstellungen hast du denn jetzt aktuell laufen?
Auf welcher Kiste läuft oscam?

 

[supraracer]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Du musst nach jeder Änderung mindestens OScam komplett neu starten, noch besser den ganzen Rechner (wie von pehedima geschrieben).

-supraracer

 

[Eldarik]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Momentan "läuft"
oscam.server:

Spoiler

[reader]
label = v14
protocol = pcsc
device = 0
autospeed = 0
caid = 098C
boxid = 12345678
ecmwhitelist = 098C:98,9B,97,57
detect = cd
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
ndsversion = 2

Nach dem Reboot keine Änderung:

Spoiler

2015/05/08 14:32:01 980008C0 h (reader) v14 [pcsc] Restarting reader
2015/05/08 14:32:01 980008C0 h (reader) v14 [pcsc] creating thread for device 0
2015/05/08 14:32:01 94007650 r (reader) v14 [pcsc] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2015/05/08 14:32:03 94007650 r (reader) v14 [pcsc] PCSC was opened with handle: 1562689989
2015/05/08 14:32:03 94007650 r (reader) v14 [pcsc] card detected
2015/05/08 14:32:03 94007650 r (reader) v14 [pcsc] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2015/05/08 14:32:04 94007650 r (reader) v14 [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 14:32:05 94007650 r (reader) v14 [pcsc] passed history check
2015/05/08 14:32:05 94007650 r TA1 = 13
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 12
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 13
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 13
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 11
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 11
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r TA1 = 11
2015/05/08 14:32:05 94007650 r FI = 01
2015/05/08 14:32:05 94007650 r (reader) v14 [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 14:32:05 94007650 r (reader) v14 [pcsc] forced to NDS2
2015/05/08 14:32:05 94007650 r (reader) v14 [pcsc] write to cardreader
2015/05/08 14:32:05 94007650 r (reader) D0 74 01 80 01
2015/05/08 14:32:06 94007650 r (reader) v14 [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 14:32:06 94007650 r (reader) v14 [pcsc] passed history check
2015/05/08 14:32:06 94007650 r TA1 = 13
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 12
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 13
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 13
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 11
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 11
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r TA1 = 11
2015/05/08 14:32:06 94007650 r FI = 01
2015/05/08 14:32:06 94007650 r (reader) v14 [pcsc] card system not supported
2015/05/08 14:32:06 94007650 r (reader) v14 [pcsc] Normal mode failed, reverting to Deprecated Mode
2015/05/08 14:32:08 94007650 r (reader) v14 [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 14:32:09 94007650 r (reader) v14 [pcsc] passed history check
2015/05/08 14:32:09 94007650 r TA1 = 13
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 12
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 13
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 13
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 11
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 11
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r TA1 = 11
2015/05/08 14:32:09 94007650 r FI = 01
2015/05/08 14:32:09 94007650 r (reader) v14 [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 14:32:09 94007650 r (reader) v14 [pcsc] forced to NDS2
2015/05/08 14:32:09 94007650 r (reader) v14 [pcsc] write to cardreader
2015/05/08 14:32:09 94007650 r (reader) D0 74 01 80 01
2015/05/08 14:32:10 94007650 r (reader) v14 [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 14:32:10 94007650 r (reader) v14 [pcsc] passed history check
2015/05/08 14:32:10 94007650 r TA1 = 13
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 12
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 13
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 13
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 11
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 11
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r TA1 = 11
2015/05/08 14:32:10 94007650 r FI = 01
2015/05/08 14:32:10 94007650 r (reader) v14 [pcsc] card system not supported
2015/05/08 14:32:10 94007650 r (reader) v14 [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/08 14:32:10 94007650 r (reader) v14 [pcsc] card initializing error

Oscam läuft unter Ubuntu 14.04 x86/64 auf einem Standard-PC.
Der Reader hängt an einem USB 2.0 Port

Wie kommt man rein theoretisch auf die richtige Taktung für einen Reader? Müssen die Werte exakt stimmen und äußert sich eine falsche Taktung üblicherweise so?

Danke jedenfalls schon mal an alle fürs reinschaun.

ok...Bei den meisten Versuchen hab ich Oscam neu gestartet (bevor ich das web-if entdeckt hab ) danach nur noch den Reader neu übers web-if.
Ich werd die gängigen Werte mal mit komplett Reboots durchspielen.

 

[supraracer]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Bitte mal so testen:

Spoiler

autospeed = 0
mhz = 400
cardmhz = 400

-supraracer

 

[Eldarik]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Ergebnis offenbar unverändert:

Spoiler

2015/05/08 15:19:41 84007500 r (reader) v14 [pcsc] Reader initialized (device=0, detect=cd, mhz=400, cardmhz=400)
2015/05/08 15:19:43 84007500 r (reader) v14 [pcsc] PCSC was opened with handle: 395981164
2015/05/08 15:19:43 84007500 r (reader) v14 [pcsc] card detected
2015/05/08 15:19:43 84007500 r (reader) v14 [pcsc] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2015/05/08 15:19:45 84007500 r (reader) v14 [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 15:19:46 84007500 r (reader) v14 [pcsc] passed history check
2015/05/08 15:19:46 84007500 r TA1 = 13
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 12
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 13
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 13
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 11
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 11
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r TA1 = 11
2015/05/08 15:19:46 84007500 r FI = 01
2015/05/08 15:19:46 84007500 r (reader) v14 [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 15:19:46 84007500 r (reader) v14 [pcsc] forced to NDS2
2015/05/08 15:19:46 84007500 r (reader) v14 [pcsc] write to cardreader
2015/05/08 15:19:46 84007500 r (reader) D0 74 01 80 01
2015/05/08 15:19:47 84007500 r (reader) v14 [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 15:19:47 84007500 r (reader) v14 [pcsc] passed history check
2015/05/08 15:19:47 84007500 r TA1 = 13
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 12
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 13
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 13
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 11
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 11
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r TA1 = 11
2015/05/08 15:19:47 84007500 r FI = 01
2015/05/08 15:19:47 84007500 r (reader) v14 [pcsc] card system not supported
2015/05/08 15:19:47 84007500 r (reader) v14 [pcsc] Normal mode failed, reverting to Deprecated Mode
2015/05/08 15:19:48 84007500 r (reader) v14 [pcsc] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/05/08 15:19:49 84007500 r (reader) v14 [pcsc] passed history check
2015/05/08 15:19:49 84007500 r TA1 = 13
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 12
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 13
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 13
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 11
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 11
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r TA1 = 11
2015/05/08 15:19:49 84007500 r FI = 01
2015/05/08 15:19:49 84007500 r (reader) v14 [pcsc] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2015/05/08 15:19:49 84007500 r (reader) v14 [pcsc] forced to NDS2
2015/05/08 15:19:49 84007500 r (reader) v14 [pcsc] write to cardreader
2015/05/08 15:19:49 84007500 r (reader) D0 74 01 80 01
2015/05/08 15:19:50 84007500 r (reader) v14 [pcsc] failed to read 7401 cmd length (6f 00)
2015/05/08 15:19:50 84007500 r (reader) v14 [pcsc] passed history check
2015/05/08 15:19:50 84007500 r TA1 = 13
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 12
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 13
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 13
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 11
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 11
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r TA1 = 11
2015/05/08 15:19:50 84007500 r FI = 01
2015/05/08 15:19:50 84007500 r (reader) v14 [pcsc] card system not supported
2015/05/08 15:19:50 84007500 r (reader) v14 [pcsc] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/08 15:19:50 84007500 r (reader) v14 [pcsc] card initializing error

Was auffällt ist, wenn die Karte beim booten schon im Reader ist, wird sie garnicht erkannt. Nach erneutem stecken aber schon.

 

[Pilot]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Eh du noch weiter lange rundockerst: besorg dir einen anderen reader: easymouse2 oder Apolloreader.

 

[Eldarik]

AW: oscam mit v14 in ReinerSCT Reader: card system not supported

Danke allen. Habs mit einem geliehenen Smargo-Reader mal versucht.
Klappte.
Nach der 3D Zubuchung, dann aber eine falsche EMM geschrieben
Das Vergnügen dauerte nur 9 min. Jetzt muss wohl die Mikrowelle zum Einsatz kommen.