Oscam IPC SRG Viaccess 5.0 liefert 2 x Fehlermeldung und dann erst ein Bild

[Purzelpries]

Hallo,

ich habe einen Igel mit Debian und die SRG Viaccess 5.0 liefert seit neuen o.a. Fehlermeldung. Die Karte lief seit einen halben Jahr einwandfrei, jetzt auf einmal die Fehler, obwohl nichtsgeändert wurde. Alle clients liefern den gleichen Fehler. Die Karte sitzt in einer Quadmouse mit 3,69 Mhz eingestellt.
Die S*y, Hd+, ORF, hallotv & HuDo Karten laufen ohne Probleme bei den clients, alles Linux Receiver (UFS910-922 mit BPanther).

Log

Spoiler

2014/06/17 00:35:50 86353D8 h srg [viaccess] Restarting reader
2014/06/17 00:35:50 86353D8 h srg [viaccess] creating thread for device /dev/srg
2014/06/17 00:35:50 862CBC8 r srg [viaccess] Reader initialized (device=/dev/srg, detect=cd, mhz=369, cardmhz=369)
2014/06/17 00:35:51 862CBC8 r srg [viaccess] card detected
2014/06/17 00:35:52 862CBC8 r srg [mouse] ATR: BEKANNT
2014/06/17 00:35:52 862CBC8 r srg [mouse] Init card protocol T0, FI=1, F=372, D=12, N=0
2014/06/17 00:35:52 862CBC8 r srg [mouse] Setting baudrate to 119032 bps
2014/06/17 00:35:52 862CBC8 r srg [mouse] Calculated work ETU is 8.40 us reader mhz = 369
2014/06/17 00:35:52 862CBC8 r srg [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.69 MHz (specified in reader->mhz)
2014/06/17 00:35:54 862CBC8 r srg [mouse] using ecm #70b for long viaccess ecm
2014/06/17 00:35:54 862CBC8 r srg [mouse] type: Viaccess (non-standard atr), caid: 0500, serial: ##########
2014/06/17 00:35:54 862CBC8 r srg [mouse] providers: 6 (FFF430,050800,050810,050820,050830,050840)
2014/06/17 00:35:54 862CBC8 r srg [mouse] Using PIN 0000!
2014/06/17 00:35:54 862CBC8 r srg [mouse] Parental lock disabled
2014/06/17 00:35:54 862CBC8 r srg [mouse] ready for requests
2014/06/17 00:35:54 862CBC8 r srg [mouse] found card system viaccess
2014/06/17 00:35:54 862CBC8 r srg [viaccess] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/17 00:35:54 862CBC8 r srg [viaccess] card detected
2014/06/17 00:35:54 862CBC8 r srg [viaccess] serial: ##########
2014/06/17 00:35:55 862CBC8 r srg [viaccess] provider: 1, id: ####################, sa: ########, geo: empty
2014/06/17 00:35:55 862CBC8 r srg [viaccess] provider: 2, id: ####################, sa: ########, geo: FF FF FF FF
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/05/29 - 2014/07/13
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/04/24 - 2014/06/08
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/03/20 - 2014/05/04
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/02/13 - 2014/03/30
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 03, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 04, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 05, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:55 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/01/09 - 2014/02/23
2014/06/17 00:35:55 862CBC8 r srg [viaccess] provider: 3, id: ######################, sa: ########, geo: FF FF FF FF
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/05/29 - 2014/07/13
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/04/24 - 2014/06/08
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/03/20 - 2014/05/04
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/02/13 - 2014/03/30
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 01, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 03, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 04, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 05, expiry date: 2014/01/18 - 2014/02/17
2014/06/17 00:35:56 862CBC8 r srg [viaccess] class: 02, expiry date: 2014/01/09 - 2014/02/23
2014/06/17 00:35:56 862CBC8 r srg [viaccess] provider: 4, id: ######################, sa: ########, geo: FF FF FF FF
2014/06/17 00:35:56 862CBC8 r srg [viaccess] provider: 5, id: ######################, sa: ########, geo: FF FF FF FF
2014/06/17 00:35:57 862CBC8 r srg [viaccess] provider: 6, id: ######################, sa: ########, geo: FF FF FF FF
2014/06/17 00:36:11 8648B90 c encrypted cccam-client xxxxxxxcxcc granted (thomas, au=on (3 reader))
2014/06/17 00:36:16 8648B90 c thomas (0500&040810/18DE/4332/30:830359D09D1237F765E5D4869BB1DC71): not found (1 ms) by srg - SRF zwei HD (provider(040810) or key(8) n
2014/06/17 00:36:16 8648B90 c thomas (0500&040810/18DE/4332/30:830359D09D1237F765E5D4869BB1DC71): not found (1 ms) by srg - SRF zwei HD
2014/06/17 00:36:18 8648B90 c thomas (0500&050800/08DE/4332/30:0242F74D39FB7F40A357E7F127F2AD43): found (228 ms) by srg - SRF zwei HD
2014/06/17 00:58:33 865F9A8 c encrypted cccam-client xxxxxxxxxxxx granted (thomas, au=on (3 reader))
2014/06/17 00:58:38 865F9A8 c thomas (0500&040810/18DE/4332/30:2169D6C01AE5C5572436B55F964A566D): not found (1 ms) by srg - SRF zwei HD (provider(040810) or key(8) n
2014/06/17 00:58:38 865F9A8 c thomas (0500&040810/18DE/4332/30:2169D6C01AE5C5572436B55F964A566D): not found (0 ms) by srg - SRF zwei HD
2014/06/17 00:58:40 865F9A8 c thomas (0500&050800/08DE/4332/30:81437A97FFA0DF90C1B7524313B456A7): found (200 ms) by srg - SRF zwei HD
2014/06/17 01:26:51 8648B90 c encrypted cccam-client xxxxxxxxxxx granted (thomas, au=on (3 reader))
2014/06/17 01:26:57 8648B90 c thomas (0500&040810/18DE/4332/30:7337C33305E47CD77AABDD37BF0D54B4): not found (1 ms) by srg - SRF zwei HD (provider(040810) or key(8) n
2014/06/17 01:26:57 8648B90 c thomas (0500&040810/18DE/4332/30:7337C33305E47CD77AABDD37BF0D54B4): not found (1 ms) by srg - SRF zwei HD
2014/06/17 01:26:58 8648B90 c thomas (0500&050800/08DE/4332/30:895FE5519E0008E39A2BAE3DBA202F3F): found (202 ms) by srg - SRF zwei HD1
2014/06/17 08:59:10 8648B90 c thomas disconnected from xxxxxxxxxxx
2014/06/17 08:59:11 8655BA8 c encrypted cccam-client xxxxxxxxxx granted (thomas, au=on (3 reader))
2014/06/17 08:59:16 8655BA8 c thomas (0500&040810/18DE/4332/30:344B80077A4CC472110FF78785A073F0): not found (1 ms) by srg - SRF zwei HD (provider(040810) or key(8) n
2014/06/17 08:59:16 8655BA8 c thomas (0500&040810/18DE/4332/30:344B80077A4CC472110FF78785A073F0): not found (0 ms) by srg - SRF zwei HD
2014/06/17 08:59:16 8655BA8 c thomas (0500&050800/08DE/4332/30:69D3C4019554AC23161F4ACE6761B695): found (200 ms) by srg - SRF zwei HD
2014/06/17 08:59:17 8655BA8 c thomas (0500&050800/08DE/4332/30:69D3C4019554AC23161F4ACE6761B695): cache1 (0 ms) by srg - SRF zwei HD
2014/06/17 08:59:21 8655BA8 c thomas (0500&050800/08DE/4332/30:956EC44AB2616B10303937249F7F6CD8): found (202 ms) by srg - SRF zwei HD

Meine configs
Igel Debian 6x IPC mit aktuller Oscam und camd3 Emu

Spoiler

oscam.server
[reader]
label = srg
description = #SRG Viaccess5.0
protocol = mouse
device = /dev/srg
services = srg
caid = 0500
ecmwhitelist = FFFF:30;FFFF:2A
detect = cd
mhz = 369
cardmhz = 369
group = 9
emmcache = 1,1,2
blockemm-unknown = 1
auprovid = 000500


oscam.user
[account]
user = thomas
pwd = bekannt
monlevel = 2
sleep = 0
au = sky1,sky2,hd1,hd2,orf1,srg,hallotv,hudo
emmreassembly = 1
allowedprotocols = newcamd,cccam
group = 1,2,3,4,5,6,7,8,9,10,11,12
services = !skyselect,!skybluemovie,!skyorfblock
cccmaxhops = 2
acosc_max_active_sids = 5
acosc_zap_limit = 10
acosc_penalty_duration = 30

oscam.services
[srg]
caid = 0500
provid = 040810,040820,040830,050810,050800
srvid = 0385,038B,038F,03B7,1F43,1F44,1260,36B2,36B3,36B8,36B9,36E3,4331,4332,4333,4334

config Client (alles Linuxreceiver mit Oscam)

Spoiler

oscam.conf

[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 0
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
maxlogsize = 200

[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1

[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
###### for E2 set pmt_mode = 0 ###########
###### for Titan set pmt_mode = 4 ###########
pmt_mode = 0
request_mode = 0

oscam.server

[reader]
enable = 1
label = cccam-reader
protocol = cccam
device = vollpfosten.zapto.org,37009
user = thomas
password = ******
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.2.1


oscam.user

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702

oscam.dvbapi

P: 0D05
P: 1830
P: 0648
P: 1702
P: 0500:050800
P: 0500:050F00
P: 0B02
P: 0500:050810
I: 0D95

Wie gesagt, die Fehlermeldungen kamen erst nach dem oscam update am Igel. Ich kann mir das nicht erklären.

Vielleicht hat ja einer einen Tip.

Danke und Grüße

 

[user4home]

AW: Oscam IPC SRG Viaccess 5.0 liefert 2 x Fehlermeldung und dann erst ein Bild

Spoiler

Meine configs
Igel Debian 6x IPC mit aktuller Oscam und camd3 Emu

Spoiler

oscam.server
[reader]
label = srg
description = #SRG Viaccess5.0
protocol = mouse
device = /dev/srg
services = srg
caid = 0500
ecmwhitelist = FFFF:30;FFFF:2A
detect = cd
mhz = 369
cardmhz = 369
group = 9
emmcache = 1,1,2
blockemm-unknown = 1
auprovid = 000500


oscam.user
[account]
user = thomas
pwd = bekannt
monlevel = 2
sleep = 0
au = sky1,sky2,hd1,hd2,orf1,srg,hallotv,hudo
emmreassembly = 1
allowedprotocols = newcamd,cccam
group = 1,2,3,4,5,6,7,8,9,10,11,12
services = !skyselect,!skybluemovie,!skyorfblock
cccmaxhops = 2
acosc_max_active_sids = 5
acosc_zap_limit = 10
acosc_penalty_duration = 30

oscam.services
[srg]
caid = 0500
provid = 050810,050800 #040810,040820,040830 = die sind für die V4 Karte!
srvid = 0385,038B,038F,03B7,1F43,1F44,1260,36B2,36B3,36B8,36B9,36E3,4331,4332,4333,4334

config Client (alles Linuxreceiver mit Oscam)

Spoiler

oscam.conf

[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 0
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
maxlogsize = 200

[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1

[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
###### for E2 set pmt_mode = 0 ###########
###### for Titan set pmt_mode = 4 ###########
pmt_mode = 0
request_mode = 0

oscam.server

[reader]
enable = 1
label = cccam-reader
protocol = cccam
device = vollpfosten.zapto.org,37009
user = thomas
password = ******
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.2.1


oscam.user

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702

oscam.dvbapi

P: 0D05
P: 1830
P: 0648
P: 1702
P: 0500:050800
P: 0500:050810
P: 0500:050F00
P: 0B02
I: 0500:040810
I: 0500:040820
I: 0D95

-----------------------
hi
probier mal die Eistellungen

Gruss

 

[mrwong]

AW: Oscam IPC SRG Viaccess 5.0 liefert 2 x Fehlermeldung und dann erst ein Bild

du kannst mal bei den services

provid = 040810,040820,040830,

rauswerfen es scheint so als ob erst versucht wird die alte srg via 4 abzufragen

 

[Purzelpries]

AW: Oscam IPC SRG Viaccess 5.0 liefert 2 x Fehlermeldung und dann erst ein Bild

Hi,

danke, das mit den Services war es. Mich wundert, daß die Karte 1/2 halbes Jahr lief und erst
mit einen oscam update die Probleme begannen.

Danke und Grüße

 

[mrwong]

AW: Oscam IPC SRG Viaccess 5.0 liefert 2 x Fehlermeldung und dann erst ein Bild

wird wohl an der neuen version liegen die sich strenger an den voragben deiner servies hällt

schön wenn man helfen konnte