OScam Fehler - not found (0 ms) by orf - ORF1

[fritz-net]

Hallo Leute,

ich habe mir auf meinem Ubuntu 14.04.1 Server OScam installiert und nach langem probieren hab ich den "rejected group (0 ms) - ORF1 (no matching reader)" fehler beseitigen können (reihenfolge der idents ändern) aber jetzt kommt bei mir "not found (0 ms) by orf - ORF1" durch googlen habe ich leider nichts gefunden was bei mir funktioniert hat.

Ich verwende eine easymouse und habe diese auf 5V, Poenix, 3...MHz (wenn ich auf mouse stelle wie in der config datei dann erkennt er die karte nicht)
Die Seriennummer meiner ORF karte(muss uralt sein) beginnt mit 0 0085

Hier meine log:

Spoiler

2015/02/27 12:02:03   BE0190 r   (reader) orf [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2015/02/27 12:02:03        0   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r0 (x86_64-linux-gnu)
2015/02/27 12:02:04   BE0190 r   (reader) orf [mouse] card detected
2015/02/27 12:02:04   BE0190 r   (reader) orf [mouse] Buffers readed  0 bytes total time_us 75094
2015/02/27 12:02:05   BE0190 r   (reader) orf [mouse] ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00 
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] Buffers readed  0 bytes total time_us 75088
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] Init card protocol T0, FI=1, F=372, D=2, N=0
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] Setting baudrate to 19819 bps
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] Calculated work ETU is 50.54 us reader mhz = 368
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] Buffers readed  0 bytes total time_us 75086
2015/02/27 12:02:06   BE0190 r   (reader) orf [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] card detected
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] type: CryptoWorks
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] type: CryptoWorks, caid: 0D05, ascii serial: ##########, hex serial: ##########
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] issuer: ORF, id: 08, bios: v3, pin: unknown, mfid: 3F02
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] providers: 4 (04,08,0C,10)
2015/02/27 12:02:07   BE0190 r   (reader) orf [mouse] found card system cryptoworks
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] provider: 1, id: 04, name: ORF
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] chid: 0001, date: 2007/10/20 - 2007/11/18, name: ORF All
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] chid: 0010, date: 2014/02/25 - 2014/09/23, name: ATV+
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] chid: 0001, date: 2014/03/06 - 2014/10/05, name: ORF All
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] chid: 0010, date: 2008/05/06 - 2008/06/04, name: ATV+
2015/02/27 12:02:07   BE0190 r   (reader) orf [cryptoworks] provider: 2, id: 08, name: Sector 2
2015/02/27 12:02:08   BE0190 r   (reader) orf [cryptoworks] provider: 3, id: 0C, name: Sector 3
2015/02/27 12:02:08   BE0190 r   (reader) orf [cryptoworks] provider: 4, id: 10, name: Sector 4
2015/02/27 12:02:08   BE0190 r   (reader) orf [cryptoworks] ready for requests
2015/02/27 12:02:08        0 s     (main) init for all local cards done
2015/02/27 12:02:08        0 s (emmcache) loaded 0 emmcache records from /tmp/oscam-svn/oscam.emmcache in 1 ms
2015/02/27 12:02:08        0 s (emmcache) loaded 0 emmstat records from /tmp/oscam-svn/oscam.emmstat in 0 ms
2015/02/27 12:02:08        0 s (anticasc) anti cascading disabled
2015/02/27 12:02:08   BE14D0 c  (newcamd) client connected to 15050 port
2015/02/27 12:02:08   BE14D0 c   (client) encrypted newcamd:15050-client 127.0.0.1 granted (tvheadend, au=on (1 reader))
2015/02/27 12:02:08   BE14D0 c  (newcamd) user tvheadend authenticated successfully (Tvheadend)
2015/02/27 12:02:08   BE14D0 c  (newcamd) AU enabled for user tvheadend on reader orf
2015/02/27 12:02:14   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32C9/9C:21CE9DFA71468498B86F3FCE2A10F296): not found (188 ms) by orf - ORF1
2015/02/27 12:02:20   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32C9/9C:EA0C58F36DDC312B87E20B1B7D81719C): not found (187 ms) by orf - ORF1
2015/02/27 12:02:35   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/132F/9C:AEC0DB69EA821B7F90BE0286D2162FB9): not found (190 ms) by orf - ORF1 HD
2015/02/27 12:02:37   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/132F/9C:0B7437479BBEE14B68BE35418570999B): not found (186 ms) by orf - ORF1 HD
2015/02/27 12:02:38   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/132F/9C:0B7437479BBEE14B68BE35418570999B): not found (0 ms) by orf - ORF1 HD
2015/02/27 12:02:47   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/132F/9C:596CD3E46BC5722FB13FB6C124082C3E): not found (187 ms) by orf - ORF1 HD
2015/02/27 12:04:07   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:96F88229F26A50652160E32C414A638B): not found (188 ms) by orf - ATV+
2015/02/27 12:04:16   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:ABA318665589F1218B89A1C7891F715B): not found (188 ms) by orf - ATV+
2015/02/27 12:04:17   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:ABA318665589F1218B89A1C7891F715B): not found (0 ms) by orf - ATV+
2015/02/27 12:04:26   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:BFB9DB811DB40D944D8C3BFE0BC57EF6): not found (187 ms) by orf - ATV+
2015/02/27 12:04:27   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:BFB9DB811DB40D944D8C3BFE0BC57EF6): not found (0 ms) by orf - ATV+
2015/02/27 12:04:36   BE14D0 c      (ecm) tvheadend (0D05&000004/0000/32D4/9C:CFAFBA15580DED342F8898F931A6243F): not found (187 ms) by orf - ATV+

Hier meine configs:

oscam.conf

Spoiler

[global]
logfile                       = /var/log/oscam/oscam.log
usrfile                       = /var/log/oscam/oscamuser.log
cwlogdir                      = /var/log/oscam/cw
disablelog                    = 0
disableuserfile               = 0
usrfileflag                   = 0
clienttimeout                 = 2000
fallbacktimeout               = 1500
clientmaxidle                 = 120
failbantime                   = 0
bindwait                      = 120
netprio                       = 0
clientdyndns                  = 0
resolvedelay                  = 2
unlockparental                = 0
nice                          = -1
serialreadertimeout           = 1000
maxlogsize                    = 10
waitforcards                  = 1
preferlocalcards              = 1
saveinithistory               = 0
readerrestartseconds          = 5
lb_mode                       = 0
lb_save                       = 0
lb_nbest_readers              = 1
lb_nfb_readers                = 1
lb_min_ecmcount               = 5
lb_max_ecmcount               = 500
lb_reopen_seconds             = 900
resolvegethostbyname          = 0

block_same_ip                 = 0
block_same_name               = 0
 
[newcamd]
#port                          = 15050@0604:000000
#port                          = 15050@0d05:000004,000000
port                          = 15050@0d05:000004
key                           = 0102030405060708091011121314
allowed                       =
keepalive                     = 1
mgclient                      = 0
 
[webif]
httpport                      = 15080
httpuser                      = oscam
httppwd                       = oscam
httprefresh                   = 0
httpallowed                   = 127.0.0.1,10.0.0.0-10.0.0.255
httphideidleclients           = 0
httpreadonly                  = 0

oscam.server

Spoiler

[reader]
label                         = orf
#protocol                      = phoenix
protocol                      = mouse
#protocol                      = internal
services                      = orf
device                        = /dev/ttyUSB0
caid                          = 0D05
#caid                          = 0D95
detect                        = cd
ecmwhitelist                  = 0D05:9c
#ecmwhitelist                  = 0D05
### Achtung ab SVN 9100 diese Einstellungen aktivieren
#cardmhz                       = 2700
#autospeed                     = 1
### bis SVN 9099 diese Einstellungen benutzen
mhz                           = 368
cardmhz                       = 368
#ident                         = 0D05:000000,000004,00000C,000010,000008
#ident                         = 0d05:000000,0d05:000004
ident                         = 0d05:000004
#ident                         = OD95:000000,000004,00000C,000008,000010
group                         = 1
emmcache                      = 1,1,2

blockemm-unknown              = 1
blockemm-u                    = 0
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1

oscam.user

Spoiler

[account]
user = tvheadend
pwd = tvheadend
uniq = 0
group = 1
#ident = 000000
#ident = 0d05:000000,0d05:000004
#caid = 0604
#caid = 0d05
au = orf

oscam.services

Spoiler

[orf]
#caid = 0D05,0D95
caid = 0D05
#provid = 000000,000004,000010
provid = 000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0, 32D1,32D2,32D3,32D4,332D,3332,33A5,33A7,4E27

Über Tipps/Lösungsansetze würde ich mich freuen

 

[supamicha]

AW: OScam Fehler - not found (0 ms) by orf - ORF1

date: 2007/10/20 - 2007/11/18
date: 2014/02/25 - 2014/09/23
date: 2014/03/06 - 2014/10/05
date: 2008/05/06 - 2008/06/04

Karte ist abgelaufen

 

[Backo]

AW: OScam Fehler - not found (0 ms) by orf - ORF1

Nun ja OSCam sagt, dass deine Karte ein Bios v3 hat, welches nur die wirklich uralten 0042er Karten haben auf dem auch der Hack für den Emu basiert. Und dieses Bios kannst du mit einem Kartenleser/schreiber und einer bestimmten Software selbst verlängern.

Falls sich OSCam irrt und du eine 0085er karte mit Bios v5 hast kannste dort nichts machen außer wenn der ORF noch EMM's für diese Karte schickt schreiben und verlängern.
Ansonsten eine neue ICE Karte beim ORF/ORS beantragen oder bis Ende März auf einen Emu ausweichen. Danach wird die CAID 0D05 sowieso abgeschalten.


MfG