Oscam Easymouse Sky V14

[corrupted]

Hallo zusammen,

ich habe eine neue Sky V14 Karte bekommen und möchte sie in meinem NAS + Easymouse betreiben. Bislang hatte ich eine V13 laufen, die keine Probleme bereitete. Nachfolgend erstmal meine Configs

Spoiler: oscam.conf

[global]
logfile = /tmp/oscam.log
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
#cachedelay = 160
bindwait = 120
nice = -1
#serialreadertimeout = 1500
maxlogsize = 2048
#saveinithistory = 1
waitforcards = 1
lb_mode = 0
lb_save = 200

Spoiler: oscam.server

[reader]
label = SKYV14
description = SKY_DE
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 357
cardmhz = 357
ident = 098C:000000
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255
ndsversion = 2

Sowie ich die Karte in den Reader stecke stürzt oscam komplett ab. Folgendes ist im Log zu sehen:

Spoiler: Logfile

2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78945
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 1 value 03 time_us 9125
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 2 value 40 time_us 21
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 3 value d7 time_us 39921
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 4 value 5b time_us 9911
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 5 value bf time_us 21
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 6 value f5 time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 7 value fe time_us 20
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 8 value 0f time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 9 value 7d time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 10 value f2 time_us 9768
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 11 value af time_us 22
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 12 value 69 time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 13 value 00 time_us 20
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 14 value ad time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 15 value f5 time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 16 value f0 time_us 9626
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 17 value ff time_us 22
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 18 value ff time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 19 value f5 time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 20 value 73 time_us 19
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Flush readed byte Nr 21 value 3f time_us 18
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Buffers readed 21 bytes total time_us 159096
2017/11/30 08:07:58 7937BA06 r (reader) SKYV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2017/11/30 08:07:59 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument

2017/11/30 08:07:59 7937BA06 r (reader) SKYV14 [mouse] card detected
2017/11/30 08:07:59 7937BA06 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78603
2017/11/30 08:08:00 7937BA06 r (reader) SKYV14 [mouse] ATR: 3F FD 14 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2017/11/30 08:08:00 7937BA06 r (reader) SKYV14 [mouse] Init card protocol T0, FI=1, F=372, D=8, N=2
2017/11/30 08:08:00 7937BA06 r (reader) SKYV14 [mouse] Setting baudrate to 76800 bps

Bin aktuell ein wenig ratlos. Hat jemand eine Idee woran der Fehler liegen kann?

Für Antworten und Bemühungen vorab vielen Dank.

Mit freundlichen Grüßen

 

[filius00]

Wenn das keine Solo ist kannst du dein Vorhaben vergessen, das wird nichts werden.

 

[bl0w]

Sieht ein wenig nach Hardware Probleme deiner Mouse aus...

Hast du mal ein anderes USB Kabel?
Stecke mal während oscam läuft die mouse ab und wieder an und dann die karte rein.

Grüße

 

[mosub]

Mach mal den reader so:

[reader]
label = v14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 358
cardmhz = 358
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[tulpenknicker]

Nimm mal die mhz werte raus und lass das die oscam selbst regeln.

Spoiler

[reader]
label = v14
description = SkyV14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
readtiers = 2
detect = cd
nagra_read = 2
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
ndsversion = 2

Desweiteren kontroliere nochmal die easymouse einstellungen
oben / unten / unten / oben (egal)
Dann mal einen kompletten reboot und schauen

 

[corrupted]

Ich habe jetzt einmal die beiden unterschiedlichen Server Confs probiert. Schaffte aber keine Abhilfe. Lediglich der Absturzzeitpunkt im Log sieht etwas anders aus.

Spoiler: Logfile

2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78861
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 1 value 03 time_us 9162
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 2 value 40 time_us 21
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 3 value d7 time_us 39928
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 4 value 5b time_us 21
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 5 value bf time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 6 value f5 time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 7 value fe time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 8 value 0f time_us 9704
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 9 value 7d time_us 21
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 10 value f2 time_us 20
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 11 value af time_us 20
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 12 value 69 time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 13 value 00 time_us 18
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 14 value ad time_us 9717
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 15 value f5 time_us 22
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 16 value f0 time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 17 value ff time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 18 value ff time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 19 value f5 time_us 19
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 20 value 73 time_us 9692
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Flush readed byte Nr 21 value 3f time_us 21
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Buffers readed 21 bytes total time_us 159134
2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2017/11/30 08:59:17 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument

2017/11/30 08:59:17 017E4093 r (reader) SKYV14 [mouse] card detected
2017/11/30 08:59:18 017E4093 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78526

Etwaige Änderungen an der Easymouse selbst kann ich erst heute Abend machen, da ich aktuell remote auf dem NAS bin.

 

[corrupted]

Wenn das keine Solo ist kannst du dein Vorhaben vergessen, das wird nichts werden.

Karte kam gestern per Post. Ist ein neues Abo ohne Receiver. Noch habe ich Hoffnung.

 

[tulpenknicker]

Dann berichte heute abend mal bitte

 

[corrupted]

Nachfolgend die Meldungen beim Trennen und wieder Verbinden der Easymouse.

Spoiler: dmesg

8167355.980000] usb 1-1.2: USB disconnect, address 6
[8167355.980000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[8167355.990000] ftdi_sio 1-1.2:1.0: device disconnected
[8196590.640000] usb 1-1.2: new full speed USB device using orion-ehci and address 7
[8196590.750000] usb 1-1.2: configuration #1 chosen from 1 choice
[8196590.770000] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[8196590.770000] usb 1-1.2: Detected FT232RL
[8196590.780000] usb 1-1.2: Number of endpoints 2
[8196590.780000] usb 1-1.2: Endpoint 1 MaxPacketSize 64
[8196590.790000] usb 1-1.2: Endpoint 2 MaxPacketSize 64
[8196590.790000] usb 1-1.2: Setting MaxPacketSize 64
[8196590.820000] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0

 

[tulpenknicker]

So bringt das eigentlich alles nicht viel.
Warte doch einfach heute abend ab und nimm dann die einstellungen vor wenn du auf deine hardware zugriff hast und du es vernünftig einstellen und einrichten kannst.

 

[corrupted]

So, habe einmal alles neugestartet und Oscam gestartet ohne karte. Dann die Karte eingesteckt.

Spoiler: Logfile

2017/11/30 20:11:08 494D6476 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78720

2017/11/30 20:11:08 494D6476 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 79006

2017/11/30 20:11:08 494D6476 r (reader) SKYV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2017/11/30 20:11:09 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument


2017/11/30 20:11:10 00000000 s (main) init for all local cards done

2017/11/30 20:11:10 00000000 s (anticasc) anti cascading disabled

2017/11/30 20:11:10 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument


2017/11/30 20:11:10 79A92E8D c (-) -- Skipped 1 duplicated log lines --

2017/11/30 20:11:10 79A92E8D c (client) encrypted cccam-client 192.168.178.25 granted (DM800HD, au=auto (1 reader))

2017/11/30 20:11:10 00000000 s (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument


2017/11/30 20:11:10 346A9C65 c (-) -- Skipped 1 duplicated log lines --

2017/11/30 20:11:10 346A9C65 c (client) encrypted cccam-client 87.183.222.10 granted (Thomas, au=off)

2017/11/30 20:11:11 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument


2017/11/30 20:11:49 494D6476 r (-) -- Skipped 45 duplicated log lines --

2017/11/30 20:11:49 494D6476 r (reader) SKYV14 [mouse] card detected

2017/11/30 20:11:49 494D6476 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78648

2017/11/30 20:11:50 494D6476 r (reader) SKYV14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2017/11/30 20:11:50 494D6476 r (reader) SKYV14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2

2017/11/30 20:11:50 494D6476 r (reader) SKYV14 [mouse] Setting baudrate to 153600 bps

Qscam stürzte dann wieder ab.

Aktuelle Configs wie folgt:

Spoiler: Oscam.server

[reader]

label = SKYV14

description = SKY_DE

protocol = mouse

device = /dev/ttyUSB0

autospeed = 0

caid = 098C

boxid = 12345678

ins7e11 = 15

readtiers = 2

detect = cd

#mhz = 357

#cardmhz = 357

#ident = 098C:000000

nagra_read = 2

group = 1

emmcache = 1,1,2,0

blockemm-unknown = 1

blockemm-u = 1

blockemm-s = 1

blockemm-g = 1

saveemm-u = 1

blockemm-bylen = 1-31,36,38,40-41,65-72,74-124,126,128-129,131,141-255

ndsversion = 2

Spoiler: Oscam.conf

[global]

logfile = /tmp/oscam.log

clienttimeout = 5000

fallbacktimeout = 2500

clientmaxidle = 120

#cachedelay = 160

bindwait = 120

nice = -1

#serialreadertimeout = 1500

maxlogsize = 2048

#saveinithistory = 1

waitforcards = 1

lb_mode = 0

lb_save = 200


[monitor]

#appendchaninfo = 1

nocrypt = 127.0.0.1, 192.168.0.0-192.168.255.255

monlevel = 0


[webif]

httpport = 18888

httphelplang = de

httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


[cccam]

port = 13333

version = 2.2.1

keepconnected = 1

stealth = 0

Für Tipps schon im Voraus danke.

 

[waves]

autospeed = 0
#mhz = 357
#cardmhz = 357

Also entweder die mHz Werte manuell angeben, oder autospeed auf 1 setzen......
autospeed auf 0 und die mHz Werte auskommentiert, das kann nicht gehen.
blockemm-bylen auch raus.

nagra_read = 2

Die V14 ist eine NDS, keine Nagra Karte. Also auch raus.

 

[corrupted]

Spoiler: Logfile

2017/11/30 20:25:40 35BA84A4 r (reader) SKYV14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

2017/11/30 20:25:41 00000000 (main) WARNING: pthread_attr_setstacksize() failed in start_thread with error 22 Invalid argument


2017/11/30 20:25:41 35BA84A4 r (reader) SKYV14 [mouse] card detected

2017/11/30 20:25:41 35BA84A4 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78443

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] Setting baudrate to 38400 bps

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 77954

2017/11/30 20:25:42 35BA84A4 r (reader) SKYV14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] Card type: P1TV

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] Rom version: 20AA

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] Credit available on card: 0 euro

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] Extended 4C detected

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] found card system videoguard2

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [videoguard2] card detected

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)

2017/11/30 20:25:44 35BA84A4 r (reader) SKYV14 [mouse] Buffers readed 0 bytes total time_us 78313

Sieht etwas anders aus, bringt aber auch einen Absturz. Hmmm...

 

[tulpenknicker]

Richtig. Autospeed auf 1 und die schalterstellung der easymouse kontrollieren. Dann karte rein und mit karte einen reboot

 

[corrupted]

Schalterstellung: Oben, unten, unten, unten