oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

[adeba]

hallo,

unibox hd3 sat, oscam drauf, v13 karte. folgender log:

Spoiler

2014/06/12 18:54:06 530238 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2014/06/12 18:54:06 530238 r v13 [internal] ERROR: Could not read reader->convention
2014/06/12 18:54:06 530238 r v13 [internal] Error activating card.
2014/06/12 18:54:06 530238 r v13 [internal] Doing fast reset
2014/06/12 18:54:06 530238 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/12 18:54:06 530238 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/12 18:54:06 530238 r v13 [internal] Calculated work ETU is 101.09 us
2014/06/12 18:54:09 530238 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/06/12 18:54:10 530238 r v13 [internal] Card type: P1TV
2014/06/12 18:54:10 530238 r v13 [internal] Rom version: 10A7
2014/06/12 18:54:11 530238 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/12 18:54:11 530238 r v13 [internal] found card system videoguard2
2014/06/12 18:54:11 530238 r v13 [videoguard2] card detected
2014/06/12 18:54:11 530238 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/12 18:54:11 530238 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/12 18:54:11 772069A0 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2014/06/12 18:54:12 772069A0 r v13 [videoguard2] card detected
2014/06/12 18:54:12 772069A0 r v13 [internal] Doing fast reset
2014/06/12 18:54:12 772069A0 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2014/06/12 18:54:12 772069A0 r v13 [internal] ERROR: Could not read reader->convention
2014/06/12 18:54:12 772069A0 r v13 [internal] Error activating card.
2014/06/12 18:54:12 772069A0 r v13 [internal] Doing fast reset
2014/06/12 18:54:12 772069A0 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/12 18:54:12 772069A0 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/12 18:54:12 772069A0 r v13 [internal] Calculated work ETU is 101.09 us
2014/06/12 18:54:15 772069A0 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 3.68
2014/06/12 18:54:16 772069A0 r v13 [internal] Card type: P1TV
2014/06/12 18:54:16 772069A0 r v13 [internal] Rom version: 10A7
2014/06/12 18:54:17 772069A0 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/12 18:54:17 772069A0 r v13 [internal] found card system videoguard2
2014/06/12 18:54:17 772069A0 r v13 [videoguard2] card detected
2014/06/12 18:54:17 772069A0 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/12 18:54:17 772069A0 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/12 18:54:17 52CAD8 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=368, cardmhz=368)
2014/06/12 18:54:18 52CAD8 r v13 [videoguard2] card detected
2014/06/12 18:54:18 52CAD8 r v13 [internal] Doing fast reset
2014/06/12 18:54:18 52CAD8 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2014/06/12 18:54:18 52CAD8 r v13 [internal] ERROR: Could not read reader->convention
2014/06/12 18:54:18 52CAD8 r v13 [internal] Error activating card.
2014/06/12 18:54:18 52CAD8 r v13 [internal] Doing fast reset
2014/06/12 18:54:18 52CAD8 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/12 18:54:18 52CAD8 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/12 18:54:18 52CAD8 r v13 [internal] Calculated work ETU is 101.09 us

was ist da nicht richtig auf den ersten blick?

 

[pehedima]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

Die Karte wird nicht korrekt gelesen. Bitte oscam.server posten.
Am besten oscam.conf und oscam oscam.user gleich mit anhängen

Gesendet von meiner Handquetsche

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

hallo,

oscam server:

Spoiler

[reader]
label = v13
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,1,2
ndsversion = 2








[reader]
label = hd01
description = HD+weiss
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
detect = cd
mhz = 368
cardmhz = 368
group = 2


[reader]
label = cline_1
description = erhaltene_c-line_vom_server1
enable = 0
protocol = cccam
device = serverdyndns_serverip
user = c_line_user
password = c_line_pass
inactivitytimeout = 30
group = 2
cccversion = 2.3.0
ccckeepalive = 1
audisabled = 1

oscam.conf

Spoiler

[global]
serverip = 192.168.178.42
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l


[newcamd]
port = 34xxx@09C4:000000
key = 0102030405060708091011121314
keepalive = 1


[dvbapi]
enabled = 1
au = 1
user = dvbapiau
boxtype = dreambox


[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255

oscam.user:

Spoiler

[account]
user = dvbapiau
pwd =
group = 1,2,3,4
uniq = 3
au = 1








[account]
user = user 1
pwd = xxxxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 2
pwd = xxxxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 3
pwd = xxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 4
pwd = xxxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 5
pwd = xxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 7
pwd = xxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user 6
pwd = xxxxx
caid = 09C4
monlevel = 4
keepalive = 0
au = 1
group = 1
ident = 09C4:000000
numusers = 0
penalty = 0


[account]
user = user8
pwd = xxxx
caid = 09C4
group = 1
ident = 09C4:000000


[account]
user = client1
pwd = pass1
group = 1,2
#au = v13,hd01
#falls dies lokale client box an freetz usw. ist




[account]
user = client2
pwd = xxxx
group = 1,2

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

welche oscam version läuft drauf?

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

[h=2]OSCAM 1.20-unstable_svn build r8647[/h]

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

poste mal auch ein aktuelles log vom einlesen der karte, das von oben ist mit mhz/cardmhz auf 368, in der config ist es auf 357 gesetzt

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

ja kommt vom "rumspielen"

Spoiler

2014/06/19 17:44:28 7790DA18 r v13 [internal] Error activating card.
2014/06/19 17:44:28 7790DA18 r v13 [internal] Doing fast reset
2014/06/19 17:44:29 7790DA18 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/19 17:44:29 7790DA18 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/19 17:44:29 7790DA18 r v13 [internal] Calculated work ETU is 74.40 us
2014/06/19 17:44:31 7790DA18 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/06/19 17:44:32 7790DA18 r v13 [internal] Card type: P1TV
2014/06/19 17:44:32 7790DA18 r v13 [internal] Rom version: 10A7
2014/06/19 17:44:33 7790DA18 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/19 17:44:33 7790DA18 r v13 [internal] found card system videoguard2
2014/06/19 17:44:33 7790DA18 r v13 [videoguard2] card detected
2014/06/19 17:44:33 7790DA18 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/19 17:44:33 7790DA18 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/19 17:44:33 77808A20 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=357)
2014/06/19 17:44:34 77808A20 r v13 [videoguard2] card detected
2014/06/19 17:44:34 77808A20 r v13 [internal] Doing fast reset
2014/06/19 17:44:34 77808A20 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 31 05 00 00
2014/06/19 17:44:34 77808A20 r v13 [internal] ERROR: Could not read reader->convention
2014/06/19 17:44:34 77808A20 r v13 [internal] Error activating card.
2014/06/19 17:44:34 77808A20 r v13 [internal] Doing fast reset
2014/06/19 17:44:35 77808A20 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/19 17:44:35 77808A20 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/19 17:44:35 77808A20 r v13 [internal] Calculated work ETU is 74.40 us
2014/06/19 17:44:37 77808A20 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/06/19 17:44:38 77808A20 r v13 [internal] Card type: P1TV
2014/06/19 17:44:38 77808A20 r v13 [internal] Rom version: 10A7
2014/06/19 17:44:39 77808A20 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/19 17:44:39 77808A20 r v13 [internal] found card system videoguard2
2014/06/19 17:44:39 77808A20 r v13 [videoguard2] card detected
2014/06/19 17:44:39 77808A20 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/19 17:44:39 77808A20 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/19 17:44:39 7790BE68 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=357)
2014/06/19 17:44:40 7790BE68 r v13 [videoguard2] card detected
2014/06/19 17:44:40 7790BE68 r v13 [internal] Doing fast reset
2014/06/19 17:44:40 7790BE68 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2014/06/19 17:44:40 7790BE68 r v13 [internal] ERROR: Could not read reader->convention
2014/06/19 17:44:40 7790BE68 r v13 [internal] Error activating card.
2014/06/19 17:44:40 7790BE68 r v13 [internal] Doing fast reset
2014/06/19 17:44:41 7790BE68 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

bitte Spoilern

Spoiler

Wie verwende ich Spoiler

Antworten, erweitert. Oben rechts im Menü findet ihr Spoiler. Damit werden die Beiträge nicht so riesen lang.
Spoiler anlicken,2x Enter drücken , Die kopierten Sachen dort einfügen

Du musst angemeldet sein, um Bilder zu sehen.

2014/06/19 17:44:39 7790BE68 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=357)

hier stimmen wieder die parameter nicht mit den von dir gesetzten in der oscam.server
nimm auch mal zum test den eintrag raus: ins7e11 = 15

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

so läuft es jetrzt, danke schon einmal. jedoch ruckeln die clients stark:
[reader]
label = v13
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 12345678
detect = cd
mhz = 500
group = 1
emmcache = 1,1,2
ndsversion = 2

Spoiler

2014/06/19 19:43:51 52ED58 c dvbapiau (09C4/0074/B3): found (385 ms) by v13 - Sky Action HD
2014/06/19 19:43:57 538BC0 c user 3 (09C4/006B/B3): found (384 ms) by v13 - Sky Hits HD
2014/06/19 19:43:58 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD
2014/06/19 19:44:02 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=35, cnt=1: written (46 ms)
2014/06/19 19:44:04 538BC0 c user 3 (09C4/006B/B3): found (387 ms) by v13 - Sky Hits HD
2014/06/19 19:44:05 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD
2014/06/19 19:44:11 538BC0 c user 3 (09C4/006B/B3): found (387 ms) by v13 - Sky Hits HD
2014/06/19 19:44:12 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD
2014/06/19 19:44:13 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=41, idx=36, cnt=1: written (61 ms)
2014/06/19 19:44:18 538BC0 c user 3 (09C4/006B/B3): found (384 ms) by v13 - Sky Hits HD
2014/06/19 19:44:19 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:44:24 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=37, cnt=1: written (46 ms)
2014/06/19 19:44:25 538BC0 c user 3 (09C4/006B/B3): found (386 ms) by v13 - Sky Hits HD
2014/06/19 19:44:26 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD
2014/06/19 19:44:35 0 --- Skipped 1 duplicated log lines ---
2014/06/19 19:44:35 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=40, idx=38, cnt=1: written (61 ms)
2014/06/19 19:44:40 52ED58 c dvbapiau (09C4/0074/B3): found (385 ms) by v13 - Sky Action HD
2014/06/19 19:44:45 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=39, cnt=1: written (47 ms)
2014/06/19 19:44:47 52ED58 c dvbapiau (09C4/0074/B3): found (384 ms) by v13 - Sky Action HD
2014/06/19 19:44:54 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:44:56 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=41, idx=40, cnt=1: written (64 ms)
2014/06/19 19:45:01 52ED58 c dvbapiau (09C4/0074/B3): found (384 ms) by v13 - Sky Action HD
2014/06/19 19:45:07 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=41, cnt=1: written (46 ms)
2014/06/19 19:45:08 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:45:20 0 --- Skipped 1 duplicated log lines ---
2014/06/19 19:45:20 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=43, idx=42, cnt=1: written (65 ms)
2014/06/19 19:45:22 52ED58 c dvbapiau (09C4/0074/B3): found (385 ms) by v13 - Sky Action HD
2014/06/19 19:45:33 0 --- Skipped 1 duplicated log lines ---
2014/06/19 19:45:33 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=43, cnt=1: written (46 ms)
2014/06/19 19:45:36 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD
2014/06/19 19:45:43 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:45:46 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=46, idx=44, cnt=1: written (70 ms)
2014/06/19 19:45:50 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:45:56 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=135, idx=45, cnt=1: written (187 ms)
2014/06/19 19:45:56 52CAC8 r v13 [videoguard2] dvbapiau emmtype=global, len=32, idx=46, cnt=1: written (46 ms)
2014/06/19 19:45:57 52ED58 c dvbapiau (09C4/0074/B3): found (386 ms) by v13 - Sky Action HD
2014/06/19 19:46:04 52ED58 c dvbapiau (09C4/0074/B3): found (387 ms) by v13 - Sky Action HD


Switch Debug from 0 to

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

Sie müssen registriert sein, um Links zu sehen.

BITTE SELBER SPOILERN, STEHT OBEN WIE ES GEHT
entschuldigt, in der hektik vergessen

---

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

trage das noch nach

Spoiler

[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = v13[/COLOR]
[COLOR=#333333]protocol = internal[/COLOR]
[COLOR=#333333]device = /dev/sci1[/COLOR]
[COLOR=#333333]caid = 09C4[/COLOR]
[COLOR=#333333]boxid = 12345678[/COLOR]
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]mhz = 500[/COLOR]
[COLOR=#333333]group = 1[/COLOR]
[COLOR=#333333]emmcache = 1,1,2[/COLOR]
[COLOR=#333333]ndsversion = 2
[/COLOR][COLOR=#ff0000]blockemm-g = 1[/COLOR]

und probier es wieder mit dem

Spoiler

[COLOR=#333333][reader][/COLOR]
[COLOR=#333333]label = v13[/COLOR]
[COLOR=#333333]protocol = internal[/COLOR]
[COLOR=#333333]device = /dev/sci1[/COLOR]
[COLOR=#333333]caid = 09C4[/COLOR]
[COLOR=#333333]boxid = 12345678[/COLOR]
[COLOR=#333333]detect = cd[/COLOR]
[COLOR=#333333]mhz = 500[/COLOR]
[COLOR=#333333]group = 1[/COLOR]
[COLOR=#333333]emmcache = 1,1,2
[/COLOR][COLOR=#ff0000]ins7e11 = 15[/COLOR]
[COLOR=#333333]ndsversion = 2
[/COLOR]blockemm-g = 1

eventuell mit 14 testen

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

Spoiler

2014/06/19 19:55:17 7790B048 r v13 [internal] Doing fast reset
2014/06/19 19:55:17 7790B048 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2014/06/19 19:55:17 7790B048 r v13 [internal] ERROR: Could not read reader->convention
2014/06/19 19:55:17 7790B048 r v13 [internal] Error activating card.
2014/06/19 19:55:18 7790B048 r v13 [internal] Doing fast reset
2014/06/19 19:55:18 7790B048 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/19 19:55:18 7790B048 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/19 19:55:18 7790B048 r v13 [internal] Calculated work ETU is 74.40 us
2014/06/19 19:55:21 7790B048 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/06/19 19:55:22 7790B048 r v13 [internal] Card type: P1TV
2014/06/19 19:55:22 7790B048 r v13 [internal] Rom version: 10A7
2014/06/19 19:55:23 7790B048 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/19 19:55:23 7790B048 r v13 [internal] found card system videoguard2
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] card detected
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/19 19:55:23 77803828 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=357)
2014/06/19 19:55:23 77803828 r v13 [videoguard2] card detected
2014/06/19 19:55:23 77803828 r v13 [internal] Doing fast reset
2014/06/19 19:55:23 77803828 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2014/06/19 19:55:23 77803828 r v13 [internal] ERROR: Could not read reader->convention

mit beiden änderungen und 15:

Spoiler

2014/06/19 19:55:17 7790B048 r v13 [internal] Doing fast reset
2014/06/19 19:55:17 7790B048 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2014/06/19 19:55:17 7790B048 r v13 [internal] ERROR: Could not read reader->convention
2014/06/19 19:55:17 7790B048 r v13 [internal] Error activating card.
2014/06/19 19:55:18 7790B048 r v13 [internal] Doing fast reset
2014/06/19 19:55:18 7790B048 r v13 [internal] ATR: 3F FF 11 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 11
2014/06/19 19:55:18 7790B048 r v13 [internal] Init card protocol T0, FI=1, F=372, D=1, N=3
2014/06/19 19:55:18 7790B048 r v13 [internal] Calculated work ETU is 74.40 us
2014/06/19 19:55:21 7790B048 r v13 [internal] ATR Fsmax is: 5 Mhz, clocking card to 5.00
2014/06/19 19:55:22 7790B048 r v13 [internal] Card type: P1TV
2014/06/19 19:55:22 7790B048 r v13 [internal] Rom version: 10A7
2014/06/19 19:55:23 7790B048 r v13 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 15
2014/06/19 19:55:23 7790B048 r v13 [internal] found card system videoguard2
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] card detected
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] type: VideoGuard Sky Germany (09C4)
2014/06/19 19:55:23 7790B048 r v13 [videoguard2] creating thread for device /dev/sci1
2014/06/19 19:55:23 77803828 r v13 [videoguard2] Reader initialized (device=/dev/sci1, detect=cd, mhz=500, cardmhz=357)
2014/06/19 19:55:23 77803828 r v13 [videoguard2] card detected
2014/06/19 19:55:23 77803828 r v13 [internal] Doing fast reset
2014/06/19 19:55:23 77803828 r v13 [internal] ATR: 78 F8 E0 88 14 00 01 04 8F F8 30 05 00 00
2014/06/19 19:55:23 77803828 r v13 [internal] ERROR: Could not read reader->convention

mit 14 auch:

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

dann würde ich mir einen externen reader zulegen (easymouse 2, apollo reader) damit der fastmode läuft
zeiten über 300ms sind nicht gerade die besten für eine NDS Karte

 

[adeba]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

bis eben war die box über dlan am netz, jetzt mal direkt versuchen
ps: hängen die ms zeiten damit zusammeb?

 

[dodo83]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

nein, nur die der clients eventuell
deine box oder deine oscam version wird wohl ein problem mit dem fastmode haben
update die oscam mal zum test

 

[bombadil]

AW: oscam auf egami 5.2, v13 wird nicht richtig erkannt irgendwie?

Hi,

der interne Reader der Unibox hat keinen Fastmode Support.

Grüße
Bombadil