Open ATV 5.3 oscam Sky D02

[Tom22]

Hallo,

ich bekomme die Karte im internen reader mit Oscam nicht hell. Jetzt habe ich gelesen,dass es für die D02 keine Treiber in dem aktuellen Image mehr gibt.
Stimmt das ?

Gruß Tom

 

[ghost0815]

Das hat nix mit Treibern im Image zu tun, sondern mit Einstellungen in Oscam.
Falls du die Karte im "Nagra Mode" laufen läst, brauchst du Box und RSA Key

 

[Tom22]

Hatte eigentlich die alten configs gesichert und zurück gespielt.Ging ja früher. Naja, ich hoffe ich finde den Fehler.

 

[ghost0815]

Was sagt den der Log von Oscam?

 

[Tom22]

Schau ich mir morgen näher an. Anscheinend gibt es auch keine Oscam mit vorgefertigtem D02 Sky reader. S02 gibt es...

 

[dodo83]

gut das man so einen Reader auch selber anpassen/ändern/einrichten kann
HowTo - Oscam.server - Konfigurationsvorschläge für diverse Karten

 

[ghost0815]

Spoiler: D02

[reader]
label = D02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1722,1834
detect = cd
ecmwhitelist = 1722:54,93;1834:89
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

Und beim User der Betatunnel

Spoiler: D02 Betatunnel

betatunnel = 1834.FFFF:1722

 

[Tom22]

Spoiler

• 2016/12/30 18:00:15 00000000 s (main) Host name = ventonhdx
• 2016/12/30 18:00:15 00000000 s (main) Release = 3.6.0
• 2016/12/30 18:00:15 00000000 s (main) Version = #1 SMP Sat Nov 12 21:44:31 CET 2016
• 2016/12/30 18:00:15 00000000 s (main) Machine = mips
• 2016/12/30 18:00:15 00000000 s (main) Stb model = dm800se
• 2016/12/30 18:00:15 00000000 s (main) Stb vumodel = vuultimo
• 2016/12/30 18:00:15 00000000 s (main) Stb boxtype = ini-5000
• 2016/12/30 18:00:15 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 566
• 2016/12/30 18:00:15 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2016/12/30 18:00:15 00000000 s (main) signal handling initialized
• 2016/12/30 18:00:15 00000000 s (config) 1 provid's loaded
• 2016/12/30 18:00:15 00000000 s (config) 1 service-id's loaded in 3 ms
• 2016/12/30 18:00:15 00000000 s (net) monitor: initialized (fd=3, port=16500)
• 2016/12/30 18:00:15 00000000 s (reader) skydeD02 [internal] creating thread for device /dev/sci1
• 2016/12/30 18:00:15 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2016/12/30 18:00:15 00000000 s (main) waiting for local card init
• 2016/12/30 18:00:15 35B6E07A r (reader) skydeD02 [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=357, cardmhz=357)
• 2016/12/30 18:00:15 35B6E07A r (reader) skydeD02 [internal] Reader sci internal, detected box type: ini-5000
• 2016/12/30 18:00:15 55195E25 h (webif) webif: decompressed 167972 bytes back into 413880 bytes
• 2016/12/30 18:00:15 55195E25 h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2016/12/30 18:00:16 00000000 s (main) init for all local cards done
• 2016/12/30 18:00:16 00000000 s (anticasc) anti cascading disabled
• 2016/12/30 18:00:16 2DF75AD8 c (client) plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
• 2016/12/30 18:00:16 2DF75AD8 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2016/12/30 18:00:17 2DF75AD8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in caPMT
• 2016/12/30 18:00:17 2DF75AD8 c (dvbapi) Demuxer 0 found 0 ECMpids and 7 STREAMpids in PMT
• 2016/12/30 18:01:18 2DF75AD8 c (dvbapi) Demuxer 0 stop descrambling program number 286F (FFFE@FFFFFE:286F unknown)
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1834 ECM_PID: 1CB6 PROVID: 000000
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 1DB6 PROVID: 000000
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 18EE PROVID: 000000
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09FD ECM_PID: 1EB6 PROVID: 000000
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in caPMT
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2016/12/30 18:01:20 2DF75AD8 c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in PMT
• 2016/12/30 18:01:24 2DF75AD8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2016/12/30 18:02:14 35B6E07A r (-) -- Skipped 10 duplicated log lines --
• 2016/12/30 18:02:14 35B6E07A r (reader) skydeD02 [internal] card detected
• 2016/12/30 18:02:17 35B6E07A r (reader) skydeD02 [internal] WARNING: Total ATR characters received is: 20 instead of expected 22
• 2016/12/30 18:02:17 35B6E07A r (reader) skydeD02 [internal] ATR: FE BF 7E 8C 3F 30 FB CD 81 CC FC FD 8E 1F DF 01 B2 03 FE FE
• 2016/12/30 18:02:17 35B6E07A r (reader) skydeD02 [internal] ERROR: Could not read reader->convention
• 2016/12/30 18:02:17 35B6E07A r (reader) skydeD02 [internal] Error activating card.
• 2016/12/30 18:02:18 2DF75AD8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2016/12/30 18:02:20 35B6E07A r (reader) skydeD02 [internal] WARNING: Total ATR characters received is: 13 instead of expected 23
• 2016/12/30 18:02:20 35B6E07A r (reader) skydeD02 [internal] ATR: FE BF C0 C1 79 7E 7C CC FC FD 8E 1F FE
• 2016/12/30 18:02:20 35B6E07A r (reader) skydeD02 [internal] ERROR: Could not read reader->convention
• 2016/12/30 18:02:20 35B6E07A r (reader) skydeD02 [internal] Error activating card.
• 2016/12/30 18:02:23 2DF75AD8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] WARNING: Total ATR characters received is: 14 instead of expected 22
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] ATR: FE BF 7E 8C 3F 30 FB 7E CC FC FD 8E 1F FE
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] ERROR: Could not read reader->convention
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] Error activating card.
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2016/12/30 18:02:24 35B6E07A r (reader) skydeD02 [internal] card initializing error
• 2016/12/30 18:02:28 2DF75AD8 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

 

[C3PO]

Die MHZ-Werte sind für einen externen Reader.

Versuch mal so:

mhz                           = 1
cardmhz                       = 2700

 

[Tom22]

Ändert nichts. Jetzt komme ich nicht mal mehr ins webinterface von Oscam.Netzwerkverbindung ok. Box neu gestartet.

 

[C3PO]

laß mal die MHz-Werte weg und versuch mal "autospeed = 1"

 

[supraracer]

autospeed                     = 1
mhz                           = 600
cardmhz                       = 2700

-supraracer

 

[Tom22]

So, andere Oscam genommen und mit
mhz = 1
cardmhz = 2700
geht es.

Eigentlich geht es mir nur darum 1 Sender ansehen zu können während zb. einer aufgenommen wird.Geht ja mit alphacrypt Modul nicht.


Danke !

 

[Tom22]

Hallo,
gestern lief es den ganzen Tag,bis das Bild stehen blieb.
Jetzt geht es auch nach Neustart garnicht mehr...

Spoiler

• 2017/01/01 11:12:45 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 1266
• 2017/01/01 11:12:45 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2017/01/01 11:12:45 00000000 s (main) signal handling initialized
• 2017/01/01 11:12:45 00000000 s (net) cccam: initialized (fd=4, port=12000)
• 2017/01/01 11:12:45 00000000 s (reader) D02 [internal] creating thread for device /dev/sci0
• 2017/01/01 11:12:45 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
• 2017/01/01 11:12:45 00000000 s (main) waiting for local card init
• 2017/01/01 11:12:45 036A0956 r (reader) D02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz)
• 2017/01/01 11:12:45 036A0956 r (reader) D02 [internal] Reader sci internal, detected box type: ini-5000
• 2017/01/01 11:12:45 0E23CEFD h (webif) webif: decompressed 165742 bytes back into 394760 bytes
• 2017/01/01 11:12:45 0E23CEFD h (webif) HTTP Server running. ip=0.0.0.0 port=83
• 2017/01/01 11:12:47 00000000 s (main) init for all local cards done
• 2017/01/01 11:12:47 00000000 s (anticasc) anti cascading disabled
• 2017/01/01 11:12:47 2B131B3D c (client) plain dvbapi-client granted (dvbapiau, au=auto (21 reader))
• 2017/01/01 11:12:47 2B131B3D c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
• 2017/01/01 11:12:47 2B131B3D c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1834 ECM_PID: 1C17 PROVID: 000000
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C7 ECM_PID: 1D17 PROVID: 000000
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 ecmpid 2 CAID: 1861 ECM_PID: 1917 PROVID: 000000
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 ecmpid 3 CAID: 09FD ECM_PID: 1E17 PROVID: 000000
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in caPMT
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
• 2017/01/01 11:12:51 2B131B3D c (dvbapi) Demuxer 0 found 4 ECMpids and 3 STREAMpids in PMT
• 2017/01/01 11:12:56 2B131B3D c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

.server

Spoiler

[reader]
label = D02
enable = 1
protocol = internal
device = /dev/sci0
caid = 1722,1834
detect = cd
ecmwhitelist = 1722:54,93;1834:89
mhz = 1
cardmhz = 2700
group = 1
emmcache = 1,3,2

 

[supraracer]

Die korrekte Einstellung für die Karte habe ich dir in #12 geschrieben, wieso nimmst du die nicht? Box danach ggf. mal komplett ausschalten (vom Strom nehmen) und wieder einschalten.

-supraracer