Neue v14 (sky+hd+) will nicht mit CCcam Client

[tom23]

Hi,

hatte bis jetzt einen CCcamServer mit ne S02... alles war suppy. Vor einer Woche hat Sky mit nun eine neue Receiver mit einer v14 (sky+hd+) geschickt (alles noch jungfräulich).

Nun habe ich mir einen IPC Server mit Oscam auf meinen Raspberry aufgesetzt.

Klar die Karte muss noch von sky freigeschaltet werden... also warte ich nun auf „Sky Sport News HD“.


Ich bekomme zwar eine Anmeldung von meinen CCcam client aber sonst tut sich nichts.

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
clientmaxidle = 160
nice = 1
maxlogsize = 2048
block_same_ip = 0

[cache]

[cs357x]
port = 12345

[cccam]
port = 40000

[webif]
httpport = 1234
httpuser = admin
httppwd = admin
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

oscam.server

Spoiler

[reader]
label = cardreader
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
ndsversion = 2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemmunknown = 1
blockemms = 1
blockemmg = 1
saveemmu = 1

oscam.user

Spoiler

[account]
user = benutzer1
pwd = passwort1
caid = 098C
au = cardreader
group = 1

[account]
user= benutzer2
pwd= passwort2
group=1
cccmaxhops=5
cccreshare=0

[account]
user= benutzer3
pwd= passwort3
group=1
cccmaxhops=5
cccreshare=0

Hat jemand eine Idee?

 

[Thommy_dd]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Du hast keine CCcam aktiviert , nur den Port dafür

 

[tom23]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Oh hoffe ich hab es nur richtig

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
clientmaxidle = 160
nice = 1
maxlogsize = 2048
block_same_ip = 0

[cache]

[cs357x]
port = 12345

[cccam]
port = 40000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240



[webif]
httpport = 1234
httpuser = admin
httppwd = admin
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

Hier mal das Oscam-log aus dem WebIf

Spoiler

• 2015/03/19 19:54:44 5BC2B8 h >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10633 (arm-linux-gnueabihf)
• 2015/03/19 19:54:44 5BC2B8 h (webif) Refresh Server requested by WebIF from 192.168.1.101
• 2015/03/19 20:07:38 5BC2B8 h (webif) Restart requested by WebIF from 192.168.1.101
• 2015/03/19 20:08:41 5C6880 c (client) encrypted cccam-client 192.168.1.116 granted (benutzer, au=on (1 reader))
• 2015/03/19 20:08:43 5C6880 c (ecm) benutzer (098C&000000/0D5D/006A/98:20E0E33370BE18965FF451BEF2A22A16): rejected group (0 ms) (no matching reader)
• 2015/03/19 20:08:45 5C6880 c (ecm) benutzer (098C&000000/0C20/006C/98:AC4D2E6B6F32D978263A5F73D0286A7B): rejected group (0 ms) (no matching reader)
• 2015/03/19 20:08:51 5C6880 c (ecm) benutzer (098C&000000/0D5D/006A/98:21BBC302C1D681E060A199C9AC126CA4): rejected group (0 ms) (no matching reader)
• 2015/03/19 20:08:51 5C6880 c (ecm) benutzer (098C&000000/0C20/006C/98:AC3EAD4A3DCF42A21CC90AD26DD08787): rejected group (0 ms) (no matching reader)

Ich bekomme eine Anmeldung oder bei der Karte scheint nix anzukommen. Als Kartenleser benutze ich einen smargo.

 

[Thommy_dd]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Mach doch mal einen Log von Anfang an! Anscheinend wird die Karte nicht eingelesen.

 

[tom23]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Spoiler

2015/03/19 21:09:47 5BBD58 r (reader) cardreader [mouse] card detected
2015/03/19 21:09:47 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75527
2015/03/19 21:09:48 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75488
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] Init card protocol T5, FI=2, F=558, D=8, N=253
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] Setting baudrate to 51200 bps
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] Calculated work ETU is 19.54 us reader mhz = 357
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 21:09:50 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75548
2015/03/19 21:09:51 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75491
2015/03/19 21:09:53 5BBD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 21:09:53 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75533
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Warning: D=0 is invalid, forcing D=1
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Setting baudrate to 4800 bps
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Calculated work ETU is 208.40 us reader mhz = 357
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 21:09:54 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75526
2015/03/19 21:09:55 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75490
2015/03/19 21:09:57 5BBD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 21:09:57 5BBD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75650
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] Warning: D=0 is invalid, forcing D=1
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] Init card protocol T5, FI=3, F=744, D=1, N=19
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] Setting baudrate to 4800 bps
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] Calculated work ETU is 208.40 us reader mhz = 357
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] card initializing error
2015/03/19 21:09:59 0 s (main) init for all local cards done
2015/03/19 21:09:59 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/03/19 21:09:59 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 1 ms
2015/03/19 21:09:59 0 s (anticasc) anti cascading disabled
2015/03/19 21:09:59 5C6458 c (client) anonymous disconnected from 192.168.1.116
2015/03/19 21:10:05 5C6928 c (client) encrypted cccam-client 192.168.1.116 granted (benutzer, au=on (1 reader))
2015/03/19 21:10:11 5C6928 c (ecm) benutzer (098C&000000/0C20/006C/98:51CFCFD96C862A8AFB251ACA3A2CE99A): rejected group (0 ms) (no matching reader)
2015/03/19 21:10:18 5C6928 c (ecm) benutzer (098C&000000/0C20/006C/98:F2638CCF99381D22D28FB81DC15D8B0E): rejected group (0 ms) (no matching reader)

 

[wylly31]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Hoffentlich hattest Du noch keine zu lange Verbindung! Ansonsten ist die Karte eh hinüber da du die blockemm Einträge komplett falsch sind. So sind sie richtig:

blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

 

[Pilot]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Er hatte Glück, das die Karte nicht gepaart wurde: Karte wird nicht richtig eingelesen:
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/19 21:09:58 5BBD58 r (reader) cardreader [mouse] card initializing error

 

[tom23]

Danke für eure Antworten.
Da hatte ich ja nochmal glück im unglück.

ich hab wylly32´s angaben gleich übernommen.
Es hängt scheinbar am Kartenleser oder wie die Karte gelesen wird. Der Kartenleser selber ist ok.
Vieleicht liege ich ja mit meinen device = /dev/ttyUSB0 falsch. Kann ich das irgendwie überprüfen?

ttyUSB0 scheint richtig zu sein. bei anderen ttyUSB X bekomme ich nur fehler.

WebIf Log

Spoiler

2015/03/19 22:22:32 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75500
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Warning: D=0 is invalid, forcing D=1
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Init card protocol T5, FI=0, F=372, D=1, N=253
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Setting baudrate to 9600 bps
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 22:22:34 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75499
2015/03/19 22:22:35 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75511
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] Init card protocol T5, FI=1, F=372, D=8, N=253
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] Setting baudrate to 76800 bps
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] Calculated work ETU is 13.03 us reader mhz = 357
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 22:22:36 1BDCD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 22:22:37 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75598
2015/03/19 22:22:38 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75545
2015/03/19 22:22:39 1BDCD58 r (reader) cardreader [mouse] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 22:22:39 1BDCD58 r (reader) cardreader [mouse] Buffers readed 0 bytes total time_us 75434
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] Warning: D=0 is invalid, forcing D=1
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] Init card protocol T5, FI=3, F=744, D=1, N=21
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] Setting baudrate to 4800 bps
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] Calculated work ETU is 208.40 us reader mhz = 357
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] ERROR: Parse_ATR returned error
2015/03/19 22:22:40 1BDCD58 r (reader) cardreader [mouse] Error activating card.
2015/03/19 22:22:41 1BDCD58 r (reader) cardreader [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/03/19 22:22:41 1BDCD58 r (reader) cardreader [mouse] card initializing error
2015/03/19 22:22:42 0 s (main) init for all local cards done
2015/03/19 22:22:42 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/03/19 22:22:42 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/03/19 22:22:42 0 s (anticasc) anti cascading disabled
2015/03/19 22:22:42 1BE5460 c (client) anonymous disconnected from 192.168.1.116
2015/03/19 22:22:46 1BEC290 c (client) encrypted cccam-client 192.168.1.116 granted (benutzer, au=on (1 reader))
2015/03/19 22:22:48 1BEC290 c (ecm) benutzer (098C&000000/0C20/006C/98:615EA93D25B1EFD1C66E16CD2AEB0F62): rejected group (0 ms) (no matching reader)
2015/03/19 22:22:54 1BEC290 c (ecm) benutzer (098C&000000/0C20/006C/98:076E2822FAFD3B34ACE9D34D04BB3467): rejected group (0 ms) (no matching reader)
2015/03/19 22:23:01 1BEC290 c (ecm) benutzer (098C&000000/0C20/006C/98:4BAD455B930A279E50F49A30B73AA1E3): rejected group (0 ms) (no matching reader)

Kann ich euch vieleicht noch ein anderes log posten?

 

[Pilot]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Schau mal ob deine easymouse richtig eingestellt ist: https://www.digital-eliteboard.com/177997-einstellungen-der-easymouse2-mit-cccam-oscam.html
Meine easymose 2 mußte ich 600 mhz takten:

Spoiler

[reader]
label = v14sat
protocol = mouse
device = /dev/ttyUSB0
services =
lb_whitelist_services =
autospeed = 0
fallback = 1
caid = 098C
boxid = 12345678
ins7e11 = 15
readtiers = 2
detect = cd
mhz = 600
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
lb_weight = 800
ndsversion = 2

 

[tom23]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Hab einen Smargo Kartenleser

Du musst angemeldet sein, um Bilder zu sehen.

 

[Pilot]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Den hab ich schon Ewigkeiten nicht mehr.
Da müssen andere weiterhelfen.

Hab aber von vielen usern mit einer Fritzbox als Server gelesen, das sie die V14 Karte nicht im smargo zum Laufen gebracht haben.
Die haben sich eine esymouse 2 zugelegt....

 

[dodo83]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

eventuell per Smartreader Protocol und Serial einbinden, ist einen Versuch wert
und ohne ins7e11 erstmal

 

[Jar Jar Bings]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Habe einen Debian Server, jedoch lief bei mir die v14 auch nicht im Smargo, erst nach Umstellung auf Easymouse wurde die Karte erkannt.

 

[wetzi33]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Habe einen raspi mit smargo mit der Reader einstellung

Spoiler

[reader]
label = sky
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
caid = 098C
detect = cd
mhz = 357
cardmhz = 357 die freq hängt von deiner oscam version ab
ins7e11 = 15
ndsversion = 2
group = 1
emmcache = 1,2,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1

 

[tom23]

AW: Neue v14 (sky+hd+) will nicht mit CCcam Client

Danke für die vielen Antworten. Ich habe gestern Abend den Client vorsichtshalber abgeschaltet und die Konfiguration etwas geändert.

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
clientmaxidle = 160
nice = 1
maxlogsize = 2048
block_same_ip = 0

[cache]

[cs357x]
port = 12345

[cccam]
port = 40000
reshare = 1
forward_origin_card = 0
ignorereshare = 0
version = 2.1.4
minimizecards = 0
keepconnected = 1
stealth = 0
reshare_mode = 0
updateinterval = 240



[webif]
httpport = 1234
httpuser = admin
httppwd = admin
httphelplang = de
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254

oscam.server

Spoiler

[reader]
label = cardreader
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
ndsversion = 2
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2


blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

oscam.user

Spoiler

[account]
user = benutzer1
pwd = passwort1
caid = 098C
au = cardreader
group = 1

[account]
user= benutzer2
pwd= passwort2
group=1
cccmaxhops=5
cccreshare=0

[account]
user= benutzer3
pwd= passwort3
group=1
cccmaxhops=5
cccreshare=0

Oscam-log aus dem WebIf.

Spoiler

2015/03/19 23:03:54 0 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2015/03/19 23:03:54 0 s (main) signal handling initialized
2015/03/19 23:03:54 0 s (net) cs357x: initialized (fd=5, port=12345)
2015/03/19 23:03:54 0 s (net) cccam: initialized (fd=6, port=40000)
2015/03/19 23:03:54 0 s (reader) cardreader [smargo] creating thread for device /dev/ttyUSB0
2015/03/19 23:03:54 0 s (stat) loadbalancer: can't read from file /tmp/.oscam/stat
2015/03/19 23:03:54 0 s (main) waiting for local card init
2015/03/19 23:03:54 1BDD778 h (webif) webif: decompressed 159255 bytes back into 380352 bytes
2015/03/19 23:03:54 1BDD778 h (webif) HTTP Server running. ip=0.0.0.0 port=1234
2015/03/19 23:03:54 1BDCD58 r (reader) cardreader [smargo] Buffers readed 0 bytes total time_us 75550
2015/03/19 23:03:54 1BDCD58 r (reader) cardreader [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2015/03/19 23:03:55 1BDCD58 r (reader) cardreader [smargo] card detected
2015/03/19 23:04:01 1BDCD58 r (reader) cardreader [smargo] ATR: xxxxxxxxxxxgeändertxxxxxxxxxxx
2015/03/19 23:04:01 1BDCD58 r (reader) cardreader [smargo] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/03/19 23:04:01 1BDCD58 r (reader) cardreader [smargo] Calculated work ETU is 4.35 us reader mhz = 534
2015/03/19 23:04:01 1BDCD58 r (reader) cardreader [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Card type: P1TV
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Rom version: 20AA
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Credit available on card: 0 euro
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Extended 4C detected
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] FuseByte: 00
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Region Code:
2015/03/19 23:04:03 1BDCD58 r (reader) cardreader [smargo] Country Code: DEU
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] Pincode read: 2866
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] PCB settings: FF FF FF FF
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] serial: ########, BoxID: ########, baseyear: 2004
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] ready for requests
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [smargo] found card system videoguard2
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] card detected
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] ------------------------------------------------------------------
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] +---------+----------+---------------------+---------------------+
2015/03/19 23:04:04 1BDCD58 r (reader) cardreader [videoguard2] |------- This card is not active, so no package available! ------|
2015/03/19 23:04:05 1BDCD58 r (reader) cardreader [videoguard2] ------------------------------------------------------from-ins70--
2015/03/19 23:04:05 0 s (main) init for all local cards done
2015/03/19 23:04:05 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/03/19 23:04:05 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/03/19 23:04:05 0 s (anticasc) anti cascading disabled

Ich denke das Oscam log sieht ja gut aus.

Bevor ich nun den Client wieder drauf lasse. Könntet ihr bitte mal auf meiner Konfig schauen... hab ein wenig Angst. Will mir nicht die Karte versauen.

Ich lasse erst den Client drauf wenn ich von euch das OK :emoticon-0148-yes: bekomme.