neue V14 Karte läuft nicht

[mantika]

Ich habe jetzt auch die V14 bekommen da ich ja S02 hatte. Ich möchte gerne jetzt auf Oscam umsteigen und habe das was im ersten Beitrag geschrieben wurde so gemacht im Logfile steht card initializing error. Was mache ich falsch? Bin leider einNeuling auf dem Gebiet, da ich nur mit cccam gearbeitet habe.
Danke für die Hilfe

Spoiler

2014/06/29 08:59:47 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu)
2014/06/29 08:59:47 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5251
2014/06/29 08:59:47 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/29 08:59:47 0 s signal handling initialized
2014/06/29 08:59:47 0 s cccam: initialized (fd=8, port=12000)
2014/06/29 08:59:47 0 s V14 [internal] creating thread for device /dev/sci0
2014/06/29 08:59:47 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/29 08:59:47 0 s waiting for local card init
2014/06/29 08:59:47 B4EB68 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/06/29 08:59:47 B4CD58 h webif: decompressed 143392 bytes back into 347872 bytes
2014/06/29 08:59:47 B4CD58 h HTTP Server running. ip=0.0.0.0 port=8080
2014/06/29 08:59:48 B4EB68 r V14 [internal] card detected
2014/06/29 08:59:50 B4EB68 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/06/29 08:59:50 B4EB68 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/29 08:59:50 B4EB68 r V14 [internal] Calculated work ETU is 18.60 us reader mhz = 500
2014/06/29 08:59:50 B4EB68 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/06/29 08:59:53 B4EB68 r V14 [internal] card system not supported
2014/06/29 08:59:53 B4EB68 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/29 08:59:54 B4EB68 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/06/29 08:59:54 B4EB68 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/06/29 08:59:54 B4EB68 r V14 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/06/29 08:59:54 B4EB68 r V14 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/06/29 08:59:57 B4EB68 r V14 [internal] card system not supported
2014/06/29 08:59:57 B4EB68 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/06/29 08:59:57 B4EB68 r V14 [internal] card initializing error
2014/06/29 08:59:58 0 s init for all local cards done
2014/06/29 08:59:58 0 s anti cascading disabled
2014/06/29 08:59:58 B573D0 c plain dvbapi-client granted (lokal, au=on (1 reader))
2014/06/29 08:59:58 B573D0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1

 

[flyinghuman]

AW: Freischaltung der "neuen" V14 mit OScam

wie sieht denn deine oscam.server aus?

vergleiche mal mit dieser hier: sollte so funktionieren. Wichtig ist ins7e11 = 15 und ndsversion = 2 für die erfolgreiche Initialisierung.
Berichtigt mich bitte wenn ich da falsch liegen sollte!

Spoiler

[reader]
label = v14
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
saveemm-u = 1
blockemm-s = 1
blockemm-g = 1
#blockemm-u = 1
#oder
blockemm-bylen = 1-31,36,38,40,65-72,74-124,126-127,131,141-255
ndsversion = 2

Gruß, Fly

 

[mantika]

AW: Freischaltung der "neuen" V14 mit OScam

Hab deine eingefügt und jetzt macht er dies.

Spoiler

2014/06/29 09:25:02 77104438 c lokal (098C&000000/0C20/006C/98:6EEA58735A50B346EAB39AC26F3430F3): not found (1 ms) by v14
2014/06/29 09:25:02 77104438 c lokal (098C&000000/0C20/006C/98:6EEA58735A50B346EAB39AC26F3430F3): not found (2 ms) by v14
2014/06/29 09:25:03 7CF550 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:25:03 77104438 c lokal (098C&000000/0C20/006C/98:6EEA58735A50B346EAB39AC26F3430F3): not found (51 ms) by v14
2014/06/29 09:25:03 77104438 c lokal (098C&000000/0C20/006C/98:6EEA58735A50B346EAB39AC26F3430F3): not found (1 ms) by v14
2014/06/29 09:25:03 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:25:03 77104438 c lokal (098C&000000/0C20/006C/98:6EEA58735A50B346EAB39AC26F3430F3): not found (2 ms) by v14
2014/06/29 09:25:04 0 --- Skipped 2 duplicated log lines ---
2014/06/29 09:25:04 7CF550 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:25:04 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (51 ms) by v14
2014/06/29 09:25:04 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:05 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (3 ms) by v14
2014/06/29 09:25:05 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:05 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:05 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (3 ms) by v14
2014/06/29 09:25:06 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:06 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:25:06 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:06 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:07 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:07 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:07 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:07 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (3 ms) by v14
2014/06/29 09:25:08 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:08 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14
2014/06/29 09:25:08 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:25:08 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (1 ms) by v14
2014/06/29 09:25:09 77104438 c lokal (098C&000000/0C20/006C/98:A48E6CE99A1E81E9B73CA851FF1F61C9): not found (2 ms) by v14

 

[pehedima]

AW: Freischaltung der "neuen" V14 mit OScam

@mantika
Würde vorschlagen, du erstellst einen neuen Thread und hängst dort oscam.user, oscam.conf und oscam.server an, inkl. des Logfiles!

Denn hier passt es nicht rein!

Edit:
Deine Karte scheint nicht freigeschaltet zu sein!

 

[mantika]

AW: V14 Einrichtungs hilfe

Hallo

bin jetzt auch ein Opfer der Umstellung. Ich möchte die V14 in der DM800se mit Oscam laufen lassen. Sind diese Einstellung Richtig?

Spoiler

[global]
logfile = /tmp/oscam.log
cwlogdir = /tmp/cw.log
emmlogdir = /tmp/emm.log
nice = -1
maxlogsize = 4096
preferlocalcards = 1
saveinithistory = 1

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

[webif]
httpport = 8080
httphelplang = de
httprefresh = 10
httpallowed = 192.168.0.1-192.168.255.255

Spoiler

[reader]
label = v14
enable = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
saveemm-u = 1
blockemm-s = 1
blockemm-g = 1
#blockemm-u = 1
#oder
blockemm-bylen = 1-31,36,38,40,65-72,74-124,126-127,131,141-255
ndsversion = 2

Spoiler

[account]
user = lokal
au = V14
group = 1

Spoiler

2014/06/29 09:34:31 77104438 c lokal (098C&000000/0C20/006C/98:8F7D6387A31DD1D97AB7A0C8098C8402): not found (3 ms) by v14
2014/06/29 09:34:31 0 --- Skipped 3 duplicated log lines ---
2014/06/29 09:34:31 7CF550 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:34:31 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (50 ms) by v14
2014/06/29 09:34:32 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:32 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:33 0 --- Skipped 3 duplicated log lines ---
2014/06/29 09:34:33 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:33 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:33 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:34 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:34 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:34 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:35 0 --- Skipped 4 duplicated log lines ---
2014/06/29 09:34:35 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:36 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:36 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:34:36 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:37 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:34:37 7CF550 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:34:37 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (52 ms) by v14
2014/06/29 09:34:37 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:37 0 --- Skipped 1 duplicated log lines ---
2014/06/29 09:34:37 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (1 ms) by v14
2014/06/29 09:34:38 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:38 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (3 ms) by v14
2014/06/29 09:34:38 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (2 ms) by v14
2014/06/29 09:34:38 77104438 c lokal (098C&000000/0C20/006C/98:4DD923BA7357B95C7EBB4DEF9E3F031A): not found (3 ms) by v14
2014/06/29 09:34:38 7CF550 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:34:38 77104438 c lokal (098C&000000/0C20/006C/98:3C5B6AD3F54BD5F934F0E37F8FF6C818): not found (51 ms) by v14
2014/06/29 09:34:39 77104438 c lokal (098C&000000/0C20/006C/98:3C5B6AD3F54BD5F934F0E37F8FF6C818): not found (2 ms) by v14
2014/06/29 09:34:39 77104438 c lokal (098C&000000/0C20/006C/98:3C5B6AD3F54BD5F934F0E37F8FF6C818): not found (1 ms) by v14
2014/06/29 09:34:39 77104438 c lokal (098C&000000/0C20/006C/98:3C5B6AD3F54BD5F934F0E37F8FF6C818): not found (2 ms) by v14
2014/06/29 09:34:40 0 --- Skipped 4 duplicated log lines ---
2014/06/29 09:34:40 77104438 c lokal (098C&000000/0C20/006C/98:3C5B6AD3F54BD5F934F0E37F8FF6C818): not found (1 ms) by v14

Danke für euere Hilfe.:emoticon-0148-yes:

 

[pehedima]

AW: V14 Einrichtungs hilfe

Auf den ersten Blick okay!

Poste bitte ein vollständiges Logfile vom oscam-start bis zum Fehler!

 

[mantika]

AW: V14 Einrichtungs hilfe

Ich habe nur die 3 conf,server und user in der config stehen, dass ist richtig?

Spoiler

2014/06/29 09:38:28 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu)
2014/06/29 09:38:28 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 18820
2014/06/29 09:38:28 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/29 09:38:28 0 s signal handling initialized
2014/06/29 09:38:29 0 s v14 [internal] creating thread for device /dev/sci0
2014/06/29 09:38:29 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/29 09:38:29 0 s waiting for local card init
2014/06/29 09:38:29 771008F0 r v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/06/29 09:38:29 7C62A8 h webif: decompressed 143392 bytes back into 347872 bytes
2014/06/29 09:38:29 7C62A8 h HTTP Server running. ip=0.0.0.0 port=8080
2014/06/29 09:38:30 771008F0 r v14 [internal] card detected
2014/06/29 09:38:31 771008F0 r v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/06/29 09:38:31 771008F0 r v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/06/29 09:38:31 771008F0 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/06/29 09:38:31 771008F0 r v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/06/29 09:38:31 771008F0 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/29 09:38:32 771008F0 r v14 [internal] Card type: P1TV
2014/06/29 09:38:32 771008F0 r v14 [internal] Rom version: 20AA
2014/06/29 09:38:32 771008F0 r v14 [internal] Credit available on card: 0 euro
2014/06/29 09:38:32 771008F0 r v14 [internal] Extended 4C detected
2014/06/29 09:38:32 771008F0 r v14 [internal] Region Code:
2014/06/29 09:38:32 771008F0 r v14 [internal] Pincode read: 5345
2014/06/29 09:38:32 771008F0 r v14 [internal] PCB settings: FF FF FF FF
2014/06/29 09:38:32 771008F0 r v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/06/29 09:38:32 771008F0 r v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/06/29 09:38:32 771008F0 r v14 [internal] ready for requests
2014/06/29 09:38:32 771008F0 r v14 [internal] found card system videoguard2
2014/06/29 09:38:32 771008F0 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/29 09:38:32 771008F0 r v14 [videoguard2] card detected
2014/06/29 09:38:32 771008F0 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/06/29 09:38:34 0 s init for all local cards done
2014/06/29 09:38:34 0 s anti cascading disabled
2014/06/29 09:38:34 77108B50 c plain dvbapi-client granted (lokal, au=off)
2014/06/29 09:38:34 77108B50 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/29 09:38:38 77108B50 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/06/29 09:38:38 77108B50 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/06/29 09:38:38 77108B50 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/06/29 09:38:38 77108B50 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/06/29 09:38:38 77108B50 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/06/29 09:38:38 77108B50 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
2014/06/29 09:38:38 77108B50 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/06/29 09:38:38 77108B50 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/06/29 09:38:39 771008F0 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:38:39 77108B50 c lokal (098C&000000/0C20/006C/98:C514DDD5E865323EEDC8A2587A1E3AA8): not found (62 ms) by v14
2014/06/29 09:38:39 77108B50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/06/29 09:38:39 77108B50 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/06/29 09:38:39 77108B50 c lokal (098C&000000/0C20/006C/98:C514DDD5E865323EEDC8A2587A1E3AA8): not found (2 ms) by v14
2014/06/29 09:38:39 77108B50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/06/29 09:38:39 77108B50 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/06/29 09:38:40 77108B50 c lokal (098C&000000/0C20/006C/98:C514DDD5E865323EEDC8A2587A1E3AA8): not found (1 ms) by v14
2014/06/29 09:38:40 77108B50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/06/29 09:38:40 77108B50 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/06/29 09:38:40 77108B50 c lokal (098C&000000/0C20/006C/98:C514DDD5E865323EEDC8A2587A1E3AA8): not found (3 ms) by v14
2014/06/29 09:38:40 77108B50 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

 

[pehedima]

AW: V14 Einrichtungs hilfe

Deine Karte ist nicht freigeschaltet.

Poste bitte ein vollständiges logfile.

Vollständige Logfiles beginnen immer mit dem oscam-Start und enden mit dem Fehler

Edit:
Logfile gefunden. Danke!

Da du keine Entiltement hast muss deine Karte erstmal EMMs bekommen.
Da ist wohl abwarten angesagt!

Wie sieht deine oscam.dvbapi aus?

so mal versuchen bis die Freischaltung erfolgt ist:

P: 098C 1
I: 0

Edit2:
Und eigentlich sollte ein neuer Thread angelegt werden!

 

[mantika]

Also muss ich jetzt mal eine Stunde warten? Aktiviert ist sie ja laut schreiben. Vielleicht ist diese ja schon mit dem Reciever den ich mitbekommen habe verheiratet, was ich so gelsen habe.:fie:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Jun 29 09:43:57 2014
-------------------------------------------------------------------------------
2014/06/29 09:43:57 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9780 (mipsel-unknown-linux-gnu)
2014/06/29 09:43:57 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 20882
2014/06/29 09:43:57 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/29 09:43:57 0 s signal handling initialized
2014/06/29 09:43:57 0 s v14 [internal] creating thread for device /dev/sci0
2014/06/29 09:43:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/29 09:43:57 0 s waiting for local card init
2014/06/29 09:43:57 77100900 r v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/06/29 09:43:57 7C62A8 h webif: decompressed 143392 bytes back into 347872 bytes
2014/06/29 09:43:57 7C62A8 h HTTP Server running. ip=0.0.0.0 port=8080
2014/06/29 09:43:58 77100900 r v14 [internal] card detected
2014/06/29 09:43:59 77100900 r v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/06/29 09:43:59 77100900 r v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/06/29 09:43:59 77100900 r v14 [internal] TEST tempo mhz check = 500 mhz
2014/06/29 09:43:59 77100900 r v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/06/29 09:43:59 77100900 r v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/06/29 09:44:00 77100900 r v14 [internal] Card type: P1TV
2014/06/29 09:44:00 77100900 r v14 [internal] Rom version: 20AA
2014/06/29 09:44:00 77100900 r v14 [internal] Credit available on card: 0 euro
2014/06/29 09:44:00 77100900 r v14 [internal] Extended 4C detected
2014/06/29 09:44:00 77100900 r v14 [internal] Region Code:
2014/06/29 09:44:00 77100900 r v14 [internal] Pincode read: 5345
2014/06/29 09:44:00 77100900 r v14 [internal] PCB settings: FF FF FF FF
2014/06/29 09:44:00 77100900 r v14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/06/29 09:44:00 77100900 r v14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/06/29 09:44:00 77100900 r v14 [internal] ready for requests
2014/06/29 09:44:00 77100900 r v14 [internal] found card system videoguard2
2014/06/29 09:44:00 77100900 r v14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/06/29 09:44:00 77100900 r v14 [videoguard2] card detected
2014/06/29 09:44:00 77100900 r v14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/06/29 09:44:02 0 s init for all local cards done
2014/06/29 09:44:02 0 s anti cascading disabled
2014/06/29 09:44:02 77102810 c plain dvbapi-client granted (lokal, au=off)
2014/06/29 09:44:02 77102810 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/06/29 09:44:07 77102810 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/06/29 09:44:07 77102810 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/06/29 09:44:07 77102810 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/06/29 09:44:07 77102810 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/06/29 09:44:07 77102810 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/06/29 09:44:07 77102810 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0008 index 0003 pmtpid 0063
2014/06/29 09:44:07 77102810 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/06/29 09:44:07 77102810 c [DVBAPI] Demuxer #0 trying to descramble PID #3 CAID 098C PROVID 000000 ECMPID 1A0F ANY CHID PMTPID 0063 VPID 03FF
2014/06/29 09:44:07 77100900 r v14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/06/29 09:44:07 77102810 c lokal (098C&000000/0C20/006C/98:5EA010104BDCEE73D5D98754B2E3ABAD): not found (71 ms) by v14

Sorry das ich keinen neuen Angelgt habe. Die Überschrift passte doch aber zu meinen Problem. oscam.dvbapi habe ich nicht drin nur die 3 conf, server und user.

 

[pehedima]

AW: V14 Einrichtungs hilfe

Das schreibt sky immer.
Im Logfile ist zu erkennen, das die Karte nicht aktiviert ist und gepaired wird sie auch noch nicht sein, da du keine aktuellen Entitlement hast.

Ich denke, erstmal alles gut, abwarten!

Wenn du allerdings das Schreiben von Entitlements selbst übernehmen willst, solltest du noch blockemm-u = 1 im Reader einfügen (blockemm-bylen kann dann raus!)
Dann wird aber nichts automatisch hell. Erst wenn du die entsprechenden EMMs selbst geschrieben hast!

 

[mantika]

AW: V14 Einrichtungs hilfe

Alles klar und Danke für die Hilfe. :emoticon-0148-yes:
Ich warte erstmal ab.:JC_hmmm:

Erst wenn du die entsprechenden EMMs selbst geschrieben hast!

in dieses Thema muss ich mich erst einarbeiten und viel lesen.:read:

 

[Pilot]

AW: neue V14 Karte läuft nicht

war mal so frei und hab ein eigenes Thema daraus gemacht
Gleichzeitig hab ich die Beiträge von mantika aus einem anderen Thema mit seiner neuen V14 Karte auch hier her verschoben.
Es ist immer besser ein eigenes Thema zu seinen Problemen zu eröffnen, als sich irgendwo mit ranzuhängen

 

[flyinghuman]

AW: neue V14 Karte läuft nicht

Einfach mal im S*y Kundencenter eine Freischaltung anfordern und auf einen S*y-Sender Schalten -> Sport News HD eignet sich bspw. dazu.

 

[mantika]

AW: neue V14 Karte läuft nicht

Freischaltung angefordert 2x und es bleibt trozdem dunkel. Komisch

 

[FiRE2k7]

AW: V14 Einrichtungs hilfe

Soweit ich sehe hast du in der conf unter dvbapi user = lokal stehen. Es muss aber local, also mit c geschrieben, heissen. Das entsprechend auch in der oscam.user ändern.

Hallo

bin jetzt auch ein Opfer der Umstellung. Ich möchte die V14 in der DM800se mit Oscam laufen lassen. Sind diese Einstellung Richtig?
Danke für euere Hilfe.:emoticon-0148-yes: