Kein EMM Log V14 DM 7020HD

[sarah20101988]

Hallo,

tut mir leid für den Nerv aber bekomme es trotz Studium aller How-To´s nicht hin, dass das EMM-Log erstellt wird.

Hier die Daten

DM 7020HD, Sky V14 Card, neu, nicht freigeschaltet

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 6 09:50:09 2015
-------------------------------------------------------------------------------
2015/04/06 9:50:09 77DED000 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (mipsel-oe-linux)
2015/04/06 9:50:09 77DED000 s version=1.10rc-svn, build #6089, system=mipsel-oe-linux, nice=-1
2015/04/06 9:50:09 77DED000 s client max. idle=120 sec, debug level=0
2015/04/06 9:50:09 77DED000 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2015/04/06 9:50:09 77DED000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2015/04/06 9:50:09 77DED000 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2015/04/06 9:50:09 77DED000 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/06 9:50:09 77DED000 s signal handling initialized (type=sysv)
2015/04/06 9:50:09 77DED000 s 213 service-id's loaded in 5ms
2015/04/06 9:50:09 77DED000 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2015/04/06 9:50:09 77DED000 s 5 provid's loaded
2015/04/06 9:50:09 77DED000 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2015/04/06 9:50:09 77DED000 s monitor: disabled
2015/04/06 9:50:09 77DED000 s camd33: disabled
2015/04/06 9:50:09 77DED000 s camd35: disabled
2015/04/06 9:50:09 77DED000 s cs378x: disabled
2015/04/06 9:50:09 77DED000 s newcamd: disabled
2015/04/06 9:50:09 77DED000 s radegast: disabled
2015/04/06 9:50:09 77DED000 s http thread started
2015/04/06 9:50:09 77DED000 s creating thread for device /dev/sci0
2015/04/06 9:50:09 7723F4B0 h HTTP Server listening on port 8888
2015/04/06 9:50:09 77DED000 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/06 9:50:09 77DED000 s waiting for local card init
2015/04/06 9:50:09 76A3F4B0 r reader thread started (thread=76A3F4B0, label=v14, device=/dev/sci0, detect=cd, mhz=1, cardmhz=2700)
2015/04/06 9:50:09 76A3F4B0 r v14 card detected
2015/04/06 9:50:11 76A3F4B0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 9:50:12 76A3F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.01 Mhz
2015/04/06 9:54:42 76A3F4B0 r card system not supported
2015/04/06 9:54:42 76A3F4B0 r Normal mode failed, reverting to Deprecated Mode
2015/04/06 9:54:44 76A3F4B0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 9:54:45 76A3F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.01 Mhz
2015/04/06 9:56:26 76A3F4B0 r ERROR in IO_Serial_Read (errno=22 Invalid argument)
2015/04/06 9:56:26 76A3F4B0 r ERROR in IO_Serial_Write u=-1 to_send=5 (errno=22 Invalid argument)
2015/04/06 9:56:26 76A3F4B0 r ERROR in IO_Serial_Read (errno=22 Invalid argument)
2015/04/06 9:56:26 76A3F4B0 r card system not supported
2015/04/06 9:56:26 76A3F4B0 r card initializing error
2015/04/06 9:56:26 77DED000 s init for all local cards done
2015/04/06 9:56:26 77DED000 s anti cascading disabled
2015/04/06 9:56:26 75A2F4B0 c plain dvbapi-client granted (lokal, au=on (1 reader))
2015/04/06 9:56:26 75A2F4B0 c dvbapi: 2 entries read from oscam.dvbapi
2015/04/06 9:56:33 76A3F4B0 r v14 card detected
2015/04/06 9:56:34 76A3F4B0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 9:56:34 75A2F4B0 c dvbapi: [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/04/06 9:56:34 75A2F4B0 c dvbapi: [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/04/06 9:56:34 75A2F4B0 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/04/06 9:56:34 75A2F4B0 c dvbapi: [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/04/06 9:56:34 75A2F4B0 c dvbapi: [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/04/06 9:56:34 75A2F4B0 c dvbapi: new program number: 0017 (Sky Krimi)
2015/04/06 9:56:35 75A2F4B0 c dvbapi: try pids again #1
2015/04/06 9:56:35 75A2F4B0 c lokal (098C&000000/0017/98:9685): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2015/04/06 9:56:35 75A2F4B0 c dvbapi: try pids again #2
2015/04/06 9:56:35 75A2F4B0 c lokal (098C&000000/0017/98:9685): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2015/04/06 9:56:35 76A3F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.01 Mhz
2015/04/06 9:56:35 75A2F4B0 c dvbapi: try pids again #3
2015/04/06 9:56:35 75A2F4B0 c dvbapi: can't decode channel
2015/04/06 9:56:35 75A2F4B0 c lokal (098C&000000/0017/98:9685): rejected group (0 ms) (of 0 avail 0) (no matching reader)
2015/04/06 10:01:06 76A3F4B0 r card system not supported
2015/04/06 10:01:06 76A3F4B0 r Normal mode failed, reverting to Deprecated Mode
2015/04/06 10:01:07 76A3F4B0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 10:01:08 76A3F4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 0.01 Mhz

oscam.conf

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.10rc-svn build #6089
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /tmp/oscam.log
emmlogdir = /etc/tuxbox/config/
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000


[monitor]
hideclient_to = 15
appendchaninfo = 0


[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox


[webif]
httpport = 8888
httpuser = root
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255

oscam.user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9812# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = lokal
au = V14
group = 1

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.10rc-svn build #6089# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 1
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1
ndsversion = 2

dvbapi

Spoiler

P:098C
I:0

Habe mich genau an diese Anleitung gehalten und doch etwas falsch gemacht
https://www.digital-eliteboard.com/322009-freischaltung-der-neuen-v14-mit-oscam.html


Habe die MHZ der Karten geändert, wie von User @Brainbug01 besschrieben....

Nutze OSCAM RC 1.10 #6089

Trotz Anruf bei SKY, neuer Freischaltung und Kanal Krimi wird kein EMM log erstellt.

Muss ich noch irgendwo rechte / user einstellen oder freischalten?

Ihr seid meine RETTUNG LG Sarah

 

[krikssus]

AW: Kein EMM Log V14 DM 7020HD

deine oscam version ist schon ein bisschen eingestaubt.
Aktualisiere die bitte mal auf eine neuer version, dann sollte es auch mit dem log klappen

EDIT: deine Karte wird momentan nach dem Log nach zu urteilen auch nicht eingelesen.
Kann ebenfalls an der veralteten OScam Version liegen. Aktuell sind wie bei OScam unstable 1.20 10647

 

[Brainbug01]

AW: Kein EMM Log V14 DM 7020HD

Für deine mhz Werte brauchst du eine oscam 1.20 ab r9099. Du bist bei 1.10 r6089 da sind es andere Werte. Und wenn du dann eine aktuelle oscam verwendest dann lösche den Eintrag ecmwhitelist

 

[sarah20101988]

AW: Kein EMM Log V14 DM 7020HD

deine oscam version ist schon ein bisschen eingestaubt.
Aktualisiere die bitte mal auf eine neuer version, dann sollte es auch mit dem log klappen

EDIT: deine Karte wird momentan nach dem Log nach zu urteilen auch nicht eingelesen.
Kann ebenfalls an der veralteten OScam Version liegen. Aktuell sind wie bei OScam unstable 1.20 10647

Danke für die schnelle Hilfe. Bekomme im newnigma-feed leider keine aktuellere Version. Habt Ihr da einen Tip, welche ich nehmen soll? Habe die oscam gedownloaded aber wenn ich sie nach usr/bin verschiebe komme ich nicht aufs webinterface...

 

[dia]

AW: Kein EMM Log V14 DM 7020HD

ziehe vorallen dingen erst mal die karte raus

 

[sarah20101988]

AW: Kein EMM Log V14 DM 7020HD

Spoiler

2015/04/06 11:51:46 77B0B380 s >> OSCam << cardserver started, version 1.10rc-svn, build #6089 (mipsel-oe-linux)

Spoiler

2015/04/06 11:51:46 77B0B380 s version=1.10rc-svn, build #6089, system=mipsel-oe-linux, nice=-1
2015/04/06 11:51:46 77B0B380 s client max. idle=120 sec, debug level=0
2015/04/06 11:51:46 77B0B380 s max. logsize=1000 Kb, loghistorysize=4096 bytes
2015/04/06 11:51:46 77B0B380 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2015/04/06 11:51:46 77B0B380 s Cannot open file "/etc/tuxbox/config/oscam.services" (errno=2 No such file or directory)
2015/04/06 11:51:46 77B0B380 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/06 11:51:46 77B0B380 s signal handling initialized (type=sysv)
2015/04/06 11:51:46 77B0B380 s 213 service-id's loaded in 5ms
2015/04/06 11:51:46 77B0B380 s can't open file "/etc/tuxbox/config/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2015/04/06 11:51:46 77B0B380 s 5 provid's loaded
2015/04/06 11:51:46 77B0B380 s can't open file "/etc/tuxbox/config/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2015/04/06 11:51:46 77B0B380 s monitor: disabled
2015/04/06 11:51:46 77B0B380 s camd33: disabled
2015/04/06 11:51:46 77B0B380 s camd35: disabled
2015/04/06 11:51:46 77B0B380 s cs378x: disabled
2015/04/06 11:51:46 77B0B380 s newcamd: disabled
2015/04/06 11:51:46 77B0B380 s radegast: disabled
2015/04/06 11:51:46 77B0B380 s http thread started
2015/04/06 11:51:46 77B0B380 s creating thread for device /dev/sci0
2015/04/06 11:51:46 76F5B4B0 h HTTP Server listening on port 8888
2015/04/06 11:51:46 77B0B380 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/06 11:51:46 77B0B380 s waiting for local card init
2015/04/06 11:51:46 7675B4B0 r reader thread started (thread=7675B4B0, label=v14, device=/dev/sci0, detect=cd, mhz=2700, cardmhz=357)
2015/04/06 11:51:47 7675B4B0 r v14 card detected
2015/04/06 11:51:48 7675B4B0 r ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 11:51:49 7675B4B0 r Maximum frequency for this card is formally 5 Mhz, clocking it to 27.00 Mhz

Habe die MHZ Zahl geändert (-1, 2700) - jetzt wird zumindest die Karte erkannt, oder?

​

- - - - - - - - - -

kommt nur leider immer noch kein EMM-Log

 

[Brainbug01]

AW: Kein EMM Log V14 DM 7020HD

Du solltest auf jedenfall eine aktuelle oscam auf dem feed finden! Und zusätzlich solltest du auch auf Dia hören!

 

[dia]

AW: Kein EMM Log V14 DM 7020HD

du kannst mit der version 6089 nicht schreiben

 

[sarah20101988]

AW: Kein EMM Log V14 DM 7020HD

So habe jetzt eine aktuellere OSCam (r10100), mehr ging nicht im Feed. Läuft aber immer noch nicht ECMWhitelist ist raus...

Spoiler

• 2015/04/06 12:20:01 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10100 (mipsel-oe-linux)
• 2015/04/06 12:20:01 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3622
• 2015/04/06 12:20:01 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/04/06 12:20:01 0 s signal handling initialized
• 2015/04/06 12:20:01 0 s 213 service-id's loaded in 6 ms
• 2015/04/06 12:20:01 0 s 5 provid's loaded
• 2015/04/06 12:20:01 0 s V14 [internal] creating thread for device /dev/sci0
• 2015/04/06 12:20:01 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/04/06 12:20:01 0 s waiting for local card init
• 2015/04/06 12:20:01 76A00588 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
• 2015/04/06 12:20:01 CB3D80 h webif: decompressed 158333 bytes back into 378112 bytes
• 2015/04/06 12:20:01 CB3D80 h HTTP Server running. ip=0.0.0.0 port=8888
• 2015/04/06 12:20:02 76A00588 r V14 [internal] card detected
• 2015/04/06 12:20:04 76A00588 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/04/06 12:20:04 76A00588 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/04/06 12:20:04 76A00588 r V14 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
• 2015/04/06 12:20:04 76A00588 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)

 

[rossi2009]

AW: Kein EMM Log V14 DM 7020HD

mach mal in der oscam server mhz 357 dann oscam neustart

 

[4gx35]

AW: Kein EMM Log V14 DM 7020HD

log zu kurz, karte wird doch evtl. gelesen,
was läuft denn deiner meinung nach nicht ?

 

[sarah20101988]

AW: Kein EMM Log V14 DM 7020HD

log zu kurz, karte wird doch evtl. gelesen,
was läuft denn deiner meinung nach nicht ?

Es wird kein EMM Logfile erstellt. Im Log steht

[internal] card system not supported
​

hat das was zu bedeuten?

Habe im Reader 1 und 2700 MHZ stehen....

Oder geht es mit dem internen Reader der 7020HD generell nicht?

Spoiler

• 2015/04/06 14:30:31 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10100 (mipsel-oe-linux)
• 2015/04/06 14:30:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8366
• 2015/04/06 14:30:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
• 2015/04/06 14:30:31 0 s signal handling initialized
• 2015/04/06 14:30:31 0 s 213 service-id's loaded in 6 ms
• 2015/04/06 14:30:31 0 s 5 provid's loaded
• 2015/04/06 14:30:31 0 s V14 [internal] creating thread for device /dev/sci0
• 2015/04/06 14:30:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2015/04/06 14:30:31 0 s waiting for local card init
• 2015/04/06 14:30:31 583D80 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
• 2015/04/06 14:30:31 583D80 r V14 [internal] card detected
• 2015/04/06 14:30:31 76F00468 h webif: decompressed 158333 bytes back into 378112 bytes
• 2015/04/06 14:30:31 76F00468 h HTTP Server running. ip=0.0.0.0 port=8888
• 2015/04/06 14:30:32 583D80 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/04/06 14:30:32 583D80 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/04/06 14:30:32 583D80 r V14 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
• 2015/04/06 14:30:33 583D80 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)
• 2015/04/06 14:48:25 583D80 r V14 [internal] card system not supported
• 2015/04/06 14:48:25 583D80 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
• 2015/04/06 14:48:27 583D80 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/04/06 14:48:27 583D80 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/04/06 14:48:27 583D80 r V14 [internal] Calculated work ETU is 37200.00 us reader mhz = 1
• 2015/04/06 14:48:27 583D80 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)

 

[4gx35]

AW: Kein EMM Log V14 DM 7020HD

nach oscam neustart steht da aber nicht mehr mhz=1 sondern wohl 450,
logfile hört da doch nicht einfach auf: oscam webif -files-logfile, evtl logfile size auf 512 kb oder mehr setzen

 

[sarah20101988]

AW: Kein EMM Log V14 DM 7020HD

Lieben Dank schon mal für die vielen Tips und Ratschläge, leider hat noch nichts geholfen.

Hier mal ein längeres Log...

Spoiler

------------------------------------------------------------------------------>> OSCam << cardserver started at Mon Apr 6 14:30:31 2015
-------------------------------------------------------------------------------
2015/04/06 14:30:31 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10100 (mipsel-oe-linux)
2015/04/06 14:30:31 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 8366
2015/04/06 14:30:31 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/04/06 14:30:31 0 s signal handling initialized
2015/04/06 14:30:31 0 s 213 service-id's loaded in 6 ms
2015/04/06 14:30:31 0 s 5 provid's loaded
2015/04/06 14:30:31 0 s V14 [internal] creating thread for device /dev/sci0
2015/04/06 14:30:31 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/04/06 14:30:31 0 s waiting for local card init
2015/04/06 14:30:31 583D80 r V14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=0.01 MHz
2015/04/06 14:30:31 583D80 r V14 [internal] card detected
2015/04/06 14:30:31 76F00468 h webif: decompressed 158333 bytes back into 378112 bytes
2015/04/06 14:30:31 76F00468 h HTTP Server running. ip=0.0.0.0 port=8888
2015/04/06 14:30:32 583D80 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 14:30:32 583D80 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/06 14:30:32 583D80 r V14 [internal] Calculated work ETU is 9300.00 us reader mhz = 1
2015/04/06 14:30:33 583D80 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)
2015/04/06 14:48:25 583D80 r V14 [internal] card system not supported
2015/04/06 14:48:25 583D80 r V14 [internal] Normal mode failed, reverting to Deprecated Mode
2015/04/06 14:48:27 583D80 r V14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/04/06 14:48:27 583D80 r V14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/04/06 14:48:27 583D80 r V14 [internal] Calculated work ETU is 37200.00 us reader mhz = 1
2015/04/06 14:48:27 583D80 r V14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 0.01 Mhz (nearest possible mhz specified reader->cardmhz)
2015/04/06 15:06:20 583D80 r V14 [internal] card system not supported
2015/04/06 15:06:20 583D80 r V14 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/04/06 15:06:20 583D80 r V14 [internal] card initializing error
2015/04/06 15:06:21 0 s init for all local cards done
2015/04/06 15:06:21 0 s anti cascading disabled
2015/04/06 15:06:21 593C58 c plain dvbapi-client granted (local, au=on (1 reader))
2015/04/06 15:06:21 593C58 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/04/06 15:06:24 593C58 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/04/06 15:06:24 593C58 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/04/06 15:06:24 593C58 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/04/06 15:06:24 593C58 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/04/06 15:06:24 593C58 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/04/06 15:06:24 593C58 c Found 5 ECMpids and 2 STREAMpids in PMT
2015/04/06 15:06:24 593C58 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0008 index 0003 pmtpid 0061
2015/04/06 15:06:24 593C58 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
2015/04/06 15:06:24 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:24 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:24 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:24 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:25 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:25 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:25 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:26 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:26 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:26 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:26 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:27 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:27 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:27 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:28 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:28 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:28 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:29 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:29 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:29 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:29 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:30 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:30 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:30 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:31 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:31 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:31 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:32 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:32 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:32 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:33 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:33 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:33 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:33 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:34 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:34 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:34 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:35 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:35 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:35 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:36 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:36 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:36 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:36 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:37 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:37 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:37 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:38 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:38 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:38 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:39 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:39 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:39 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:39 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:40 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:40 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:40 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:41 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:41 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:41 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:42 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:42 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:42 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:42 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:43 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:43 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:43 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/04/06 15:06:44 593C58 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/04/06 15:06:44 593C58 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

 

[tom_63]

AW: Kein EMM Log V14 DM 7020HD

Das System macht genau das, was konfiguriert wurde.
MHz = 1 bedeutet 0,01 MHz.
Genau das wird eingestellt und damit natürlich keine Karte erkannt.

Ich würde mal
mhz = 450
cardmhz = 2700
empfehlen. Dann läuft der Leser mit 4,5 MHz und die Karte wird erkannt werden.

Gruß
TOM