Kartentausch - keine EMM

[Brian78]

Hallo zusammen.

Langsam verzweifle ich, und ich hoffe, ihr könnt (und wollt...) mir helfen:

Seit der Ankündigung des Kartentausches vor etwas mehr als vier Wochen habe ich versucht, mich in das Thema Freischaltung / Logging / Blocking.... einzulesen. Trotz diverser Änderungen und zweifacher Online-Freischaltung kriege ich keine EMM´s, sodass ich leider auch keine Aktivierung / Freischaltung probieren kann.

Hier meine Daten:

Logfile:

Spoiler

-------------------------------------------------------------------------------
>> DOSCam << started at Sat Jun 6 17:56:49 2015
-------------------------------------------------------------------------------
2015/06/06 17:56:49 0 s >> DOSCam << started, V0.25 (arm-cx2450x-linux-gnueabi-coolapi-libusb)
2015/06/06 17:56:49 0 s creating pidfile /tmp/.doscam/doscam.pid with pid 692
2015/06/06 17:56:49 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2015/06/06 17:56:49 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/06/06 17:56:49 0 s signal handling initialized
2015/06/06 17:56:49 0 s LED support is not active. Can't detect machine type.
2015/06/06 17:56:49 0 s monitor: initialized (fd=15, port=988)
2015/06/06 17:56:49 0 s cccam (used for zeroconf): initialized (fd=16, port=21526)
2015/06/06 17:56:49 0 s Slot1 [internal] creating thread for device 0
2015/06/06 17:56:49 0 s Slot2 [internal] creating thread for device 1
2015/06/06 17:56:49 0 s EMU [constcw] creating thread for device /var/tuxbox/config/SoftCam.Key
2015/06/06 17:56:49 0 s loadbalancer: can't read from file /tmp/.doscam/stat
2015/06/06 17:56:49 0 s waiting for local card init
2015/06/06 17:56:49 1101F8 r Slot1 [internal] Reader initialized (device=0, detect=cd, mhz=357, cardmhz=357)
2015/06/06 17:56:49 111D80 r Slot2 [internal] Reader initialized (device=1, detect=cd, mhz=357, cardmhz=357)
2015/06/06 17:56:49 113908 p EMU init failed - Keyfile not found!
2015/06/06 17:56:49 1101F8 r Slot1 [internal] card detected
2015/06/06 17:56:49 117800 h webif: decompressed 50154 bytes back into 144440 bytes
2015/06/06 17:56:49 117800 h HTTP Server running. ip=0.0.0.0 port=8080
2015/06/06 17:56:53 1101F8 r Slot1 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/06 17:56:53 1101F8 r Slot1 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/06/06 17:56:53 1101F8 r Slot1 [internal] Calculated work ETU is 18.60 us
2015/06/06 17:56:55 1101F8 r Slot1 [internal] Driver Settings: Convention=Inverse, Protocol=T0, FI=1, F=372, N=2, DI=3, D=4, PI1=5, PI2=0, II=1, TXRetries=0, RXRetries=0, FilterProtocolBytes=0
2015/06/06 17:56:55 1101F8 r Slot1 [internal] Driver Timeouts: CardActTime=45004, CardDeactTime=0, ATRSTime=65535, ATRDTime=19200, BLKTime=0, CHTime=57588, CHGuardTime=2, BKGuardTime=4
2015/06/06 17:56:55 1101F8 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2015/06/06 17:56:56 1101F8 r Slot1 [internal] Card type: P1TV
2015/06/06 17:56:56 1101F8 r Slot1 [internal] Rom version: 20AA
2015/06/06 17:56:56 1101F8 r Slot1 [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/06/06 17:56:56 1101F8 r Slot1 [internal] found card system videoguard2
2015/06/06 17:56:56 1101F8 r Slot1 [videoguard2] card detected
2015/06/06 17:56:56 1101F8 r Slot1 [videoguard2] type: VideoGuard Sky Germany (098C)
2015/06/06 17:56:57 0 s init for all local cards done
2015/06/06 17:56:57 0 s anti cascading disabled
2015/06/06 17:56:57 11D2F8 c plain dvbapi-client granted (lokal, au=on (3 reader))
2015/06/06 17:56:57 11D2F8 c Detected Coolstream API
2015/06/06 17:56:57 0 192.168.178.5 [cccam] creating thread for device 192.168.178.5
2015/06/06 17:56:57 1101F8 r Slot1 [internal] Doing fast reset
2015/06/06 17:56:58 126560 p 192.168.178.5: resolved ip=192.168.178.5
2015/06/06 17:56:58 126560 p 192.168.178.5 [cccam] connecting to 192.168.178.5:21526
2015/06/06 17:56:58 126560 p 192.168.178.5 [cccam] proxy initialized, server 192.168.178.5:21526
2015/06/06 17:56:59 1101F8 r Slot1 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/06/06 17:56:59 1101F8 r Slot1 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/06/06 17:56:59 1101F8 r Slot1 [internal] Calculated work ETU is 4.65 us
2015/06/06 17:56:59 1101F8 r Slot1 [internal] Driver Settings: Convention=Inverse, Protocol=T0, FI=1, F=372, N=2, DI=5, D=16, PI1=5, PI2=0, II=1, TXRetries=0, RXRetries=0, FilterProtocolBytes=0
2015/06/06 17:56:59 1101F8 r Slot1 [internal] Driver Timeouts: CardActTime=45004, CardDeactTime=0, ATRSTime=65535, ATRDTime=19200, BLKTime=0, CHTime=230388, CHGuardTime=2, BKGuardTime=4
2015/06/06 17:56:59 1101F8 r Slot1 [internal] ATR Fsmax is: 5 MHz, clocking card to 5.00
2015/06/06 17:57:00 1101F8 r Slot1 [internal] Card type: P1TV
2015/06/06 17:57:00 1101F8 r Slot1 [internal] Rom version: 20AA
2015/06/06 17:57:00 1101F8 r Slot1 [internal] parental lock setting: FF FF FF FF
2015/06/06 17:57:00 1101F8 r Slot1 [internal] parental lock disabled
2015/06/06 17:57:00 1101F8 r Slot1 [internal] parental lock setting after disabling: FF FF FF FF
2015/06/06 17:57:00 1101F8 r Slot1 [internal] type: VideoGuard Sky Germany (098C), caid: 098C
2015/06/06 17:57:00 1101F8 r Slot1 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/06/06 17:57:00 1101F8 r Slot1 [internal] ready for requests
2015/06/06 17:57:00 1101F8 r Slot1 [internal] found card system videoguard2
2015/06/06 17:57:00 1101F8 r Slot1 [videoguard2] card detected
2015/06/06 17:57:00 1101F8 r Slot1 [videoguard2] type: VideoGuard Sky Germany (098C)
2015/06/06 17:57:01 1320C0 c 192.168.178.5: resolved ip=192.168.178.5
2015/06/06 17:57:01 1320C0 c encrypted cccam-client 192.168.178.5 granted (192.168.178.5, au=on (3 reader))
2015/06/06 17:57:02 11D2F8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c Found 5 ECMpids and 4 STREAMpids in PMT
2015/06/06 17:57:02 11D2F8 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/06/06 17:57:02 11D2F8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/06/06 17:57:02 11D2F8 c Found 5 ECMpids and 4 STREAMpids in PMT
2015/06/06 17:57:02 11D2F8 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/06/06 17:57:03 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:03 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:24AB): not found (684 ms) by Slot1
2015/06/06 17:57:03 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:24AB): not found (188 ms) by Slot1
2015/06/06 17:57:03 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:24AB): not found (0 ms) by Slot1
2015/06/06 17:57:07 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:07 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:8612): not found (44 ms) by Slot1
2015/06/06 17:57:07 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:8612): not found (0 ms) by Slot1
2015/06/06 17:57:10 11D2F8 c Found 0 ECMpids and 10 STREAMpids in PMT
2015/06/06 17:57:10 11D2F8 c New program number: 283D (0000:283D unknown) [pmt_list_management 3]
2015/06/06 17:57:23 11D2F8 c [ADD PID 0] CAID: 1702 ECM_PID: 1742 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c [ADD PID 1] CAID: 1833 ECM_PID: 1842 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c [ADD PID 2] CAID: 1836 ECM_PID: 1843 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c [ADD PID 3] CAID: 09C4 ECM_PID: 1B42 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c [ADD PID 4] CAID: 09AF ECM_PID: 1F42 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c [ADD PID 5] CAID: 098C ECM_PID: 1A42 PROVID: 000000
2015/06/06 17:57:23 11D2F8 c Found 6 ECMpids and 6 STREAMpids in PMT
2015/06/06 17:57:23 11D2F8 c New program number: 000A (1702:000A unknown) [pmt_list_management 3]
2015/06/06 17:57:24 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:24 11D2F8 c lokal (098C&000000/1A42/0000/000A/98:7441): not found (44 ms) by Slot1
2015/06/06 17:57:25 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:25 11D2F8 c lokal (098C&000000/1A42/0000/000A/98:473C): not found (44 ms) by Slot1
2015/06/06 17:57:25 11D2F8 c lokal (098C&000000/1A42/0000/000A/98:473C): not found (1 ms) by Slot1
2015/06/06 17:57:27 11D2F8 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/06/06 17:57:27 11D2F8 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/06/06 17:57:27 11D2F8 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/06/06 17:57:27 11D2F8 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/06/06 17:57:27 11D2F8 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/06/06 17:57:27 11D2F8 c Found 5 ECMpids and 4 STREAMpids in PMT
2015/06/06 17:57:27 11D2F8 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/06/06 17:57:27 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:27 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:F41A): not found (43 ms) by Slot1
2015/06/06 17:57:28 1101F8 r Slot1 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2015/06/06 17:57:28 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:64B3): not found (45 ms) by Slot1
2015/06/06 17:57:28 11D2F8 c lokal (098C&000000/1A40/0000/0017/98:64B3): not found (0 ms) by Slot1

Doscam.cfg:

Spoiler

[global]
logfile = stdout;/tmp/doscam.log
maxlogsize = 2500
emmlogdir = /var/tuxbox/config/emmlog/

[webif]
httpport = 8080
httphelplang = de

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = coolstream

Doscam.dvbapi

Spoiler

P:098C
I:0

Doscam.services

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
saveemm-u = 1
saveemm-unknown = 1
ndsversion = 2

#[reader]
#label = V14
#protocol = internal
#device = /dev/sci1
#autospeed = 0
#caid = 098C
#ins7e11 = 15
#detect = cd
#group = 1
#emmcache = 1,1,2
#blockemm-unknown = 1
#blockemm-s = 1
#blockemm-g = 1
#blockemm-u = 1
#saveemm-u = 1
#saveemm-unknown = 1
#ndsversion = 2

(da ich nicht wußte, in welchem Reader meine Karte steckte habe ich beide Reader probiert und festgestellt, dass meine Karte im 1. Reader (oben) steckt

oscam.user

Spoiler

[account]
user = lokal
au = V14
group = 1

Ich nutze eine Coolstream Neo2 Sat und Doscam V0.25.

Für Tipps, Hinweise und Infos wäre ich dankbar!

Danke und Gruss
Brian78

 

[supraracer]

AW: Kartentausch - keine EMM

Falschen Bereich des Forum erwischt, hier geht es um OScam.
Hier weiter machen: Link ist nicht mehr aktiv.
oder Doscam runter und OScam drauf (was ich dir empfehlen würde).

-supraracer

 

[webman2]

AW: Kartentausch - keine EMM

Ob es die Lösung ist, weiss ich nicht.

Es fehlen aber die clocking-Parameter im reader der v14.

Spoiler

[reader]
label = V14
protocol = internal
device = /dev/sci0
caid = 098C
ins7e11 = 15
detect = cd
mhz = 2700
cardmhz = 450
group = 1
emmcache = 1,1,10
blockemm-u = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[crazyfreak01]

AW: Kartentausch - keine EMM

@Brian78

ich empfehle dir auch dringlichst bei der Inbetriebnahme der V14 eine normale Oscam Version zu nehmen. Hier hast du den meisten Support.

Und wenn alles läuft dann nimm deine heiß geliebte Doscam.

MfG

 

[Brian78]

AW: Kartentausch - keine EMM

Danke für die Info. Sorry für den falschen Bereich.

Was müsste ich den bei Oscam eintragen? Bisher dachte ich immer, dass Doscam eine Erweiterung von Oscam wäre und die Einstellungen daher ziemlich übereinstimmen würden...

Gruss Brian78

 

[supraracer]

AW: Kartentausch - keine EMM

Wieso sollte das die Lösung sein, im Log oben steht doch dass seine Karte gelesen wird.

-supraracer

 

[Brian78]

AW: Kartentausch - keine EMM

Ich probiere es mal mit OScam. Auf jeden Fall schonmal vielen Dank!!!!