Hi Leute,
ich bin recht neu in diesem Thema. Hatte vorher eine Dreambox 7020 und als clients Dbox2. Auf beiden lief jeweils immer ein cccam.
Jetzt habe ich mir gestern den Kathi UFS910 gekauft und auch alles soweit installiert das mein Incubuscam 0.82 läuft.
Wenn ich aber in den lines 2 server eintrage bekomme ich garkeine Daten von den Karten geliefert.
Kennt jemand das Porblem und gibt es hierzu vielleicht eine Lösung?
Für Eure Hilfe schonmal vorab vielen Dank
Meine Config sieht so aus:
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
#card_server_url_0=cccam://
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
#card_server_url_0=cccam://
card_server_url_0=cccam://kathi:kathi2@xxx.xxx.xx.xx:xxxxx
card_server_url_0=cccam://kathi:kathi1@xxx.xxx.xx.xx:xxxxx
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://<username>:<password>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://kathi:kathi2@xxx.xxx.xx.xx:xxxxx
card_server_url=cccam://kathi:kathi1@xxx.xxx.xx.xx:xxxxx
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
ich bin recht neu in diesem Thema. Hatte vorher eine Dreambox 7020 und als clients Dbox2. Auf beiden lief jeweils immer ein cccam.
Jetzt habe ich mir gestern den Kathi UFS910 gekauft und auch alles soweit installiert das mein Incubuscam 0.82 läuft.
Wenn ich aber in den lines 2 server eintrage bekomme ich garkeine Daten von den Karten geliefert.
Kennt jemand das Porblem und gibt es hierzu vielleicht eine Lösung?
Für Eure Hilfe schonmal vorab vielen Dank
Meine Config sieht so aus:
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
#card_server_url_0=cccam://
[Prov:000000:CaID:0000]
# this provider is a stand-in for all cards and all caid not declared previously
#
# For example I choose to use cccam protocol on all other provider.
#
decoder_type=1
#card_server_url_0=cccam://
card_server_url_0=cccam://kathi:kathi2@xxx.xxx.xx.xx:xxxxx
card_server_url_0=cccam://kathi:kathi1@xxx.xxx.xx.xx:xxxxx
[Servers]
#
# This is the section for the multi-server configuration.
#
# URL of card-server to use, formats are as follows:
#
# cccam://<username>:<password>@<hostname>:<port>/<receive_emu_shared>/[EMM]
# where <receive_emu_shared> should assume value "yes" (without quotes, if you like to receive emus data shared by the server) or "no" (this is assumed by default)
#
# gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>/[EMM]
#
# NOTE: The "EMM" suffix is optional and tells the card-server client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# NOTE 2: The "card_server_url" is not the same as previously declared in the prov/caid section
# use how many server as you like
#
card_server_url=cccam://kathi:kathi2@xxx.xxx.xx.xx:xxxxx
card_server_url=cccam://kathi:kathi1@xxx.xxx.xx.xx:xxxxx
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>
#card_server_url=cccam://<username>:<password>@<hostname>:<port>
#card_server_url=gbox://<localhost>:<localport>:<password>@<peer_address>:<peer_port>:<peer_pass>
########################### CaIDs tunneling configuration ############################
[CaIDTunnel]
#
# All values are in hex notation
# In this file you can configure what CAIDs/PIDs incubusCamd should tunnel to another CAID
#
# situation 1: this caid, all idents, on all channels will use the tunnel_caid
# caid:tunnel_caid
#
# situation 2: this caid/ident pair will use the tunnel_caid
# caid:tunnel_caid:ident
#
# situation 3: this caid/ident pair, on channel 'sid' will use the tunnel_caid
# caid:tunnel_caid:ident:sid
#
# i.e:
1833:1702:000000:0082 # this one should tunnel premiereHD nagra3 into betacrypt cards
1833:1702:000000:0081 # this one should tunnel premiereHD nagra3 into betacrypt cards
Zuletzt bearbeitet: