Hilfe,Oscam läuft nicht

[paladin2666]

hallo
bin am umstellen von ccam auf oscam.
Habe eine dreambox 800Hd se
Sky s02 card
Bekomme das aber nicht hin.
Die card wird nich ausgelesen.
Log webif

Spoiler

2014/06/07 17:46:44 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r788 (mipsel-unknown-linux-gnu)
2014/06/07 17:46:44 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 23605
2014/06/07 17:46:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/06/07 17:46:44 0 s signal handling initialized
2014/06/07 17:46:44 0 s cccam: initialized (fd=5, port=13000)
2014/06/07 17:46:44 0 s SkyGermany [internal] creating thread for device /dev/sci0
2014/06/07 17:46:44 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/06/07 17:46:44 0 s waiting for local card init
2014/06/07 17:46:44 5406B8 r SkyGermany [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=600)
2014/06/07 17:46:44 5423B8 h webif: decompressed 69662 bytes back into 195704 bytes
2014/06/07 17:46:44 5423B8 h HTTP Server running. ip=0.0.0.0 port=16001
2014/06/07 17:46:45 5406B8 r SkyGermany [internal] card detected
2014/06/07 17:46:47 5406B8 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/07 17:46:47 5406B8 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/07 17:46:47 5406B8 r SkyGermany [internal] Calculated work ETU is 93.00 us reader mhz = 600
2014/06/07 17:46:47 5406B8 r SkyGermany [internal] ATR Fsmax is 6 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/07 17:46:48 5406B8 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/06/07 17:46:48 5406B8 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/06/07 17:46:48 5406B8 r SkyGermany [internal] detect irdeto card
2014/06/07 17:46:56 5406B8 r SkyGermany [internal] card system not supported
2014/06/07 17:46:56 5406B8 r SkyGermany [internal] Normal mode failed, reverting to Deprecated Mode
2014/06/07 17:46:59 5406B8 r SkyGermany [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/06/07 17:46:59 5406B8 r SkyGermany [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/06/07 17:46:59 5406B8 r SkyGermany [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/06/07 17:46:59 5406B8 r SkyGermany [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/06/07 17:47:00 5406B8 r SkyGermany [internal] detect irdeto tunneled nagra card
2014/06/07 17:47:00 5406B8 r SkyGermany [internal] no rsa key configured -> using irdeto mode
2014/06/07 17:47:00 5406B8 r SkyGermany [internal] detect irdeto card

Für eure Hilfe wäre ich dankbar.

 

[waves]

AW: Hilfe,Oscam läuft nicht

Ohne Configs geht nix....meine Glaskugel ist schon im Pfingstwochenende. DD

Also Configs posten, und bitte in Spoilern.

Spoiler

Wie verwende ich Spoiler

Antworten, erweitert. Oben rechts im Menü findet ihr Spoiler. Damit werden die Beiträge nicht so riesen lang.
Spoiler anlicken,2x Enter drücken , Die kopierten Sachen dort einfügen

Du musst angemeldet sein, um Bilder zu sehen.

 

[4gx35]

AW: Hilfe,Oscam läuft nicht

Link ist nicht mehr aktiv.

 

[paladin2666]

AW: Hilfe,Oscam läuft nicht

Spoiler

[global]
nice = -1
PreferLocalCards = 1
saveinithistory = 1
waitforcards = 1

[cccam]
port = 13000
version = 2.3.0
reshare = 1

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox

[webif]
httpport = 16001
httpuser = root
httppwd = dreambox
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.254.254
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

- - - - - - - - - -

Spoiler

[reader]
label = SkyGermany
enable = 1
protocol = internal
device = /dev/sci0
caid = 1702,1833
services=SkyGermany
boxid = 12345678
detect = CD
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2

- - - - - - - - - -

Spoiler

[account]
user = local
enable = 1
group = 1,2
au = 1
betatunnel = 1702
caid = 1702
services = SkyGermany,HDplus
uniq = 3

 

[easy1173]

AW: Hilfe,Oscam läuft nicht

Muss man nicht bei der s02 den Boxkey und RSA Key haben, und nicht die boxid?

 

[waves]

AW: Hilfe,Oscam läuft nicht

Wie @4gx35 schon schrieb:

cardmhz = 2700
mhz = 1

Wenn das nicht geht, dann

cardmhz = 2700
mhz = 600

versuchen.

 

[janni1]

AW: Hilfe,Oscam läuft nicht

Hi,
versuch es mal mit

mhz = 1
cardmhz = 2700

im Reader.

Gruß
janni1

 

[paladin2666]

AW: Hilfe,Oscam läuft nicht

Ihr seit echt Klasse.
Danke!!!!!!!!!!!!!!!!!!!!!!!!:emoticon-0148-yes:

- - - - - - - - - -

card ok aber no entiliments

Spoiler

2014/06/07 18:09:26 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:27 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:27 2AF00AE0 c local (0000&000000/0000/00DF/89:29238D52E965CD5EFDD3617DFDE88AEF): not found (482 ms) by SkyGermany(btun 1702) (SkyGermany irdeto_do_cmd [2]
2014/06/07 18:09:27 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:28 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:28 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (482 ms) by SkyGermany(btun 1702) (SkyGermany irdeto_do_cmd [2]
2014/06/07 18:09:29 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:29 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:29 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (2 ms) by SkyGermany(btun 1702)
2014/06/07 18:09:30 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:30 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:30 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (2 ms) by SkyGermany(btun 1702)
2014/06/07 18:09:30 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:31 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:31 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (1 ms) by SkyGermany(btun 1702)
2014/06/07 18:09:31 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:32 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:32 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (2 ms) by SkyGermany(btun 1702)
2014/06/07 18:09:32 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2014/06/07 18:09:33 2AF00AE0 c [DVBAPI] Demuxer #0 trying to descramble PID #0 CAID 1702 PROVID 000000 ECMPID 170C ANY CHID PMTPID 0066 VPID 02FF
2014/06/07 18:09:33 2AF00AE0 c local (0000&000000/0000/00DF/89:3A2E88ED7B1E82BD3E97655EC6411C89): not found (2 ms) by SkyGermany(btun 1702)
2014/06/07 18:09:33 2AF00AE0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!

 

[janni1]

AW: Hilfe,Oscam läuft nicht

Hi,
dein Betatunnel im user ist fehlerhaft.
Der sollte so aussehen:

betatunnel = 1833.FFFF:1702

Achso und die 1833 sollt mit bei Caid rein

caid = 1702,1833

oder caid ganz leer lassen.

Gruß
janni1

 

[paladin2666]

AW: Hilfe,Oscam läuft nicht

Danke ist offen!!!!!!!!!!!!!!!
DD