HD+ plötzlich dunkel

[Ulpenzulp]

Hallo Forum,

ich habe das Problem, dass die HD+ Karte (HD01) plötzlich dunkel wurde.
Ich habe das Problem gegoogelt und es scheint bekannt zu sein. Auf jeden Fall haben aber alle Lösungsansätze nicht geholfen.
Aber erstmal die log (Ausschnitt):

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:01:26 2000
-------------------------------------------------------------------------------
2000/01/01 01:01:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9744 (mipsel-unknown-linux-gnu-ssl-libusb-pcsc)
2000/01/01 01:01:26 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 909
2000/01/01 01:01:26 0 s The current system time is smaller than the build date (May 24 2014). Waiting up to 60 seconds for time to correct
2000/01/01 01:02:27 0 s Waiting was not successful. OSCam will be started but is UNSUPPORTED this way. Do not report any errors with this version.
2000/01/01 01:02:27 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
2000/01/01 01:02:27 0 s userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2000/01/01 01:02:27 0 s signal handling initialized
2000/01/01 01:02:27 0 s 180 service-id's loaded in 5ms
2000/01/01 01:02:27 0 s cccam: initialized (fd=7, port=12000)
2000/01/01 01:02:27 0 s SkyS02 [internal] creating thread for device /dev/sci1
2000/01/01 01:02:27 0 s HDPlus [internal] creating thread for device /dev/sci0
2000/01/01 01:02:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2000/01/01 01:02:27 0 s waiting for local card init
2000/01/01 01:02:27 588B20 r SkyS02 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=6.00 MHz
2000/01/01 01:02:27 5A42C0 r HDPlus [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.68 MHz
2000/01/01 01:02:27 58A950 h webif: decompressed 151915 bytes back into 363072 bytes
2000/01/01 01:02:27 58A950 h HTTP Server running. ip=0.0.0.0 port=xxxx
2000/01/01 01:02:28 588B20 r SkyS02 [internal] card detected
2000/01/01 01:02:28 5A42C0 r HDPlus [internal] card detected
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] TEST tempo mhz check = 368 mhz
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] Calculated work ETU is 8.31 us reader mhz = 385
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 3.85 Mhz (nearest possible mhz specified reader->cardmhz)
2000/01/01 01:02:30 5A42C0 r HDPlus [internal] Card responded ok for ifsd request of 251
2000/01/01 01:02:31 5A42C0 r HDPlus [internal] detect native nagra card
2000/01/01 01:02:31 588B20 r SkyS02 [internal] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2000/01/01 01:02:31 588B20 r SkyS02 [internal] Init card protocol T14, FI=2, F=558, D=1, N=0
2000/01/01 01:02:31 588B20 r SkyS02 [internal] TEST tempo mhz check = 600 mhz
2000/01/01 01:02:31 588B20 r SkyS02 [internal] Calculated work ETU is 103.33 us reader mhz = 540
2000/01/01 01:02:31 588B20 r SkyS02 [internal] PLL Reader: ATR Fsmax is 6 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2000/01/01 01:02:32 5A42C0 r HDPlus [internal] found card system nagra
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] ROM: D N A S P 1 4 2
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] REV: R e v G C 6
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] SER: ############
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] CAID: 1830
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] Prv.ID: 00 00 34 11 (sysid)
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] Prv.ID: 00 00 00 00
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] IRD ID: ############
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] active to: 2014/07/22
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] -----------------------------------------
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] |id |tier |valid from |valid to |
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] +----+--------+------------+------------+
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] |8011|0064 |2010/ |2011/ |
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] |8011|0BEA |2014/ |2015/ |
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] -----------------------------------------
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] ready for requests
2000/01/01 01:02:32 588B20 r SkyS02 [internal] detect irdeto tunneled nagra card
2000/01/01 01:02:32 588B20 r SkyS02 [internal] no rsa key configured -> using irdeto mode
2000/01/01 01:02:32 588B20 r SkyS02 [internal] detect irdeto card
2000/01/01 01:02:32 588B20 r SkyS02 [internal] caid: 1702, acs: 3.84, country code: GER
2000/01/01 01:02:32 588B20 r SkyS02 [internal] providers: 4, ascii serial: ##########, hex serial: ######, hex base: ##
2000/01/01 01:02:35 588B20 r SkyS02 [internal] WARNING: For Irdeto cards you will have to set 'cardmhz = 600' in oscam.server
2000/01/01 01:02:35 588B20 r SkyS02 [internal] active providers: 2 (000000,000000)
2000/01/01 01:02:35 588B20 r SkyS02 [internal] found card system irdeto
2000/01/01 01:02:35 588B20 r SkyS02 [irdeto] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2000/01/01 01:02:36 588B20 r SkyS02 [irdeto] entitlements for provider: 2, id: 000000
2000/01xxxx
2000/01/01 01:02:39 588B20 r SkyS02 [irdeto] ready for requests
2000/01/01 01:02:40 0 s init for all local cards done
2000/01/01 01:02:40 0 s anti cascading log initialized
2000/01/01 01:02:40 5AD988 c plain dvbapi-client granted (local, au=auto (2 reader))
2000/01/01 01:02:40 5AD988 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2000/01/01 01:02:40 5B5D88 c anonymous disconnected from xxxx
2000/01/01 01:02:40 5B0268 c anonymous disconnected from xxxx
2000/01/01 01:02:40 5B3EC8 c anonymous disconnected from xxxx
2000/01/01 01:02:40 5B2098 c anonymous disconnected from xxxx
2000/01/01 01:03:00 5BE9F8 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:01 5C1A88 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:01 5C4B18 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:03 5C4B18 c xxxx(1830&003411/0000/EF10/92:xxxx): not found (226 ms) by HDPlus - RTL HD
2000/01/01 01:03:07 5C7BA8 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:10 5C1A88 c xxxx(1830&003411/0000/EF10/92:xxxx): not found (247 ms) by HDPlus - RTL HD
2000/01/01 01:03:12 5CAC38 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:14 5CAC38 c xxxx(1830&003411/0000/EF74/92:xxxx): not found (226 ms) by HDPlus - SAT.1 HD
2000/01/01 01:03:16 5B5D88 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:17 5B0268 c encrypted cccam-client xxxx granted (xxxx, au=off)
2000/01/01 01:03:19 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (748 ms) by SkyS02 - History HD
2000/01/01 01:03:20 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (764 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:21 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (695 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:23 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (795 ms) by SkyS02 - History HD
2000/01/01 01:03:28 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (763 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:30 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (799 ms) by SkyS02 - History HD
2000/01/01 01:03:35 5B0268 c xxxx (1702&000000/0000/0083/93:xxxx): found (765 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:37 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (798 ms) by SkyS02 - History HD
2000/01/01 01:03:42 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (760 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:44 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (796 ms) by SkyS02 - History HD
2000/01/01 01:03:49 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (762 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:51 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (795 ms) by SkyS02 - History HD
2000/01/01 01:03:56 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (769 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:03:58 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (797 ms) by SkyS02 - History HD
2000/01/01 01:04:03 5B0268 c xxxx(1702&000000/0000/0083/93:xxxx): found (760 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:04:05 5B5D88 c xxxx(1702&000000/0000/0071/93:xxxx): found (798 ms) by SkyS02 - History HD
2000/01/01 01:04:10 5B0268 c xxxx(1702&000000/0000/0083/93:3EFxxxx7): found (765 ms) by SkyS02 - Sky Cinema HD
2000/01/01 01:04:10 5C4B18 c xxxx(1830&003411/0000/EF10/92:F7Exxxx): not found (226 ms) by HDPlus - RTL HD

Daraus lässt sich eigentlich schon erkennen, dass die Karte nicht richtig geupdatet wurde...
2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] active to: 2014/07/22
Obwohl sie noch bis nächstes Jahr "gültig" ist.

Ich habe dann festgestellt, dass ich auf dem Server in der .conf zwar au = 1 stehen habe, nicht aber in der .user für den Client, sondern nur für den Server.
Diese habe ich daraufhin angepasst:
.conf:

Spoiler

[global]usrfile = /tmp/oscamuser.log
logfile = /tmp/oscam.log
cachedelay = 100
nice = -1
maxlogsize = 1024
saveinithistory = 1
failbantime = 4500
failbancount = 2
netprio = 0
waitforcards = 1
dropdubs = 1
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20




[dvbapi]
enabled = 1
boxtype = dreambox
user = local
au = 1
pmt_mode = 0


[cccam]
port = 12000
reshare = 0
version = 2.1.3
keepconnected = 1
stealth = 1


[monitor]
appendchaninfo=1
#Sendernamen aus der oscam.srvid werden im Logfile angezeigt


[webif]
httpport = 12000
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 192.168.178.0-192.168.178.255


[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 10
penalty = 0
aclogfile = /tmp/oscam_ac.log
denysamples = 10
fakedelay = 4000


[cache]
Delay = 120

Die .user habe ich daraufhin geändert, indem ich dem Nutzer au = 1 dazugeschrieben habe (vorher war nur bei local au=1), anschließend die Box neugestartet.

Spoiler

[account]user = local
enable = 1
group = 1,2
au = 1
caid = 1702,1830,1833
betatunnel = 1833.FFFF:1702
uniq = 3


[account]
user = Test
pwd = Test
disabled = 0
keepalive = 1
caid = 1702,1830,1833
group = 1,2
au = 1
betatunnel = 1833.FFFF:1702
uniq = 3
cccmaxhops = 0
cccreshare = 0

Ok, das hat leider nichts gebracht.
Also nochmal versucht die Scam 3.59 zu reaktivieren, 15 Min. laufen lassen, aber weiterhin schwarz.

Daraufhin habe ich die .dvapi nochmal angepasst. Nämlich von:
.dvapi (alt):

Spoiler

# Sky Germany S02 CardP: 1702
P: 1833
I: 09c4
I: 09c7
I: 09af
I: 1722
I: 1836


# HDplus HD01 Card (white)
M: 1830 1830:003411
P: 1830:000000
I: 1834:000000




# HDplus HD02 Card (black)
#M: 1843 1843:003411
#P: 1843:000000
#I: 1830:000000


################# Ende ##################

auf:
.dvapi (neu):

Spoiler

# Sky Germany S02 CardP: 1702
P: 1833
I: 09c4
I: 09c7
I: 09af
I: 1722
I: 1836


# HDplus HD01 Card (white)
M: 1830:000000 1830:003411
P: 1830 1
#I: 1834:000000




# HDplus HD02 Card (black)
#M: 1843 1843:003411
#P: 1843:000000
#I: 1830:000000


################# Ende ##################

Sky läuft weiterhin, HD+ nicht. Die .dvapi liegt nur auf dem Client. Die anderen configs sind vom Server.
Jemand eine Idee wie ich die Karte noch updaten könnte, wenn sie das einfach nicht machen will?

Falls es hilft noch die .server von Server und Client:

.server (Server):

Spoiler

[reader]label = SkyS02
enable = 1
protocol = internal
device = /dev/sci1
caid = 1702,1833
detect = cd
boxkey = 1122334455667788
mhz = 600
cardmhz = 2700
autospeed = 0
#ident = 1702:000000;1833:000000
group = 1
emmcache = 1,1,2


[reader]
label = HDPlus
enable = 1
protocol = internal
detect = cd
device = /dev/sci0
group = 2
CAID = 1830
mhz = 368
cardmhz = 2700
autospeed = 0
boxkey = A7xx7C
rsakey = BF35xx4DD5
emmcache = 1,1,2
blockemm-unknown = 1

.server (Client):

Spoiler

[reader]label = Test
enable = 1
description =OScam Port
protocol = cccam
device = 192.168.178.54,12000
user = Test
password = Test
group = 1,2
cccversion = 2.1.3
ccckeepalive = 1

 

[dodo83]

AW: HD+ plötzlich dunkel

hi,
dein Entitlement ist abgelaufen

2000/01/01 01:02:32 5A42C0 r HDPlus [nagra] active to: 2014/07/22

 

[joopastron]

AW: HD+ plötzlich dunkel

Die Karte wird selbst mit Scam nicht hell ? Das ist schon verwunderlich. Lass mal bitte etwas länger laufen. Du kannst auch auf der HD+ Seite reaktivieren.


Sent from my iPhone using Tapatalk

 

[kaaslord]

AW: HD+ plötzlich dunkel

Hast Du mal auf das Datum von deinem Server geschaut? Macht sowas keine Probleme?

 

[hwmmc]

AW: HD+ plötzlich dunkel

Versuch mal auf DMAX HD updaten zu lassen ...

 

[Ulpenzulp]

AW: HD+ plötzlich dunkel

So, mir ist es jetzt gekommen. War eigene Dummheit, von daher funktioniert es jetzt wieder.
Der Tipp mit dem Datum war gar nicht so schlecht. Gestern habe ich in der Hektik gar nicht dran gedacht, dass sich die Karten über Satellit updaten.
Ohne Satellitenempfang ist das natürlich eine schlechte Voraussetzung --> siehe Thread.

Auf jeden Fall habe ich die Karte in meinen anderen Receiver, die configs neu kopiert, Scam 3.59 eingeschaltet und geht wieder.