hd+ 02 nicht hell

[zockerpit]

hallo,
habe die hd+ 02 in der vu+ duo2 im unteren kartenschacht,
wird aber nicht hell

Spoiler

[reader]
label = hdplus02
protocol = internal
device = /dev/sci1
caid = 1843
boxkey = A7...7C
rsakey = BF..D5
detect = cd
nagra_read = 1
mhz = 540
cardmhz = 2700
ident = 1843:000000,003411,008011
group = 2
emmcache = 1,1,2
auprovid = 003411

Spoiler

2015/03/14 11:32:50 0 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
2015/03/14 11:32:50 0 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 0 ms
2015/03/14 11:32:50 0 s (anticasc) anti cascading disabled
2015/03/14 11:32:50 543BD0 r key file not found in: /etc/tuxbox/config
2015/03/14 11:32:50 543BD0 r reading key file: /var/keys/SoftCam.Key
2015/03/14 11:32:50 540150 h (webif) webif: decompressed 160365 bytes back into 383968 bytes
2015/03/14 11:32:50 543BD0 r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/03/14 11:32:50 540150 h (webif) HTTP Server running. ip=0.0.0.0 port=83
2015/03/14 11:32:50 5441C0 c (client) plain dvbapi-client granted (dvbapi_local, au=auto (2 reader))
2015/03/14 11:32:50 5441C0 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2015/03/14 11:32:50 5441C0 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/03/14 11:32:51 543670 r (reader) hdplus02 [internal] card detected
2015/03/14 11:32:51 543BD0 r (reader) emulator [emu] card detected
2015/03/14 11:32:52 543670 r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/03/14 11:32:52 543670 r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/14 11:32:52 543670 r (reader) hdplus02 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/03/14 11:32:52 543BD0 r (reader) emulator [emu] found card system emu
2015/03/14 11:32:52 543BD0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/14 11:32:52 543BD0 r key file not found in: /etc/tuxbox/config
2015/03/14 11:32:52 543BD0 r reading key file: /var/keys/SoftCam.Key
2015/03/14 11:32:55 543670 r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 3099608
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 0 CAID: 1830 ECM_PID: 1CEA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 1 CAID: 1843 ECM_PID: 19EA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 2 CAID: 09C4 ECM_PID: 1BEA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 3 CAID: 098C ECM_PID: 1AEA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 4 CAID: 1860 ECM_PID: 1EEA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 added new ecmpid 5 CAID: 186A ECM_PID: 1EEA PROVID: 000000
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 found 6 ECMpids and 6 STREAMpids in PMT
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 receiver wants to demux srvid EF74 on adapter 0000 camask 0001 index 0000 pmtpid 0060
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 new program number: EF74 (1830:EF74 unknown) [pmt_list_management 3]
2015/03/14 11:32:55 5441C0 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/03/14 11:32:55 543670 r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/03/14 11:32:55 543670 r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
2015/03/14 11:32:56 543670 r (reader) hdplus02 [internal] detect native nagra card
2015/03/14 11:32:57 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 11:33:00 543670 r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2015/03/14 11:33:00 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 11:33:03 543670 r (reader) hdplus02 [internal] T1 Resync command error, trying to reactivate!
2015/03/14 11:33:03 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 11:33:04 543670 r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/03/14 11:33:04 543670 r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/14 11:33:04 543670 r (reader) hdplus02 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/03/14 11:33:06 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 11:33:07 543670 r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 3099651
2015/03/14 11:33:08 543670 r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/03/14 11:33:08 543670 r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
2015/03/14 11:33:08 543670 r (reader) hdplus02 [internal] card system not supported
2015/03/14 11:33:08 543670 r (reader) hdplus02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/03/14 11:33:09 543670 r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/03/14 11:33:09 543670 r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/14 11:33:09 543670 r (reader) hdplus02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/03/14 11:33:09 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 11:33:12 543670 r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 3099667
2015/03/14 11:33:12 543670 r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/03/14 11:33:12 5441C0 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

Spoiler

[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = dvbapi_local
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface

Spoiler

[account]
user = dvbapi_local
au = 1
group = 1

was ist falsch ?
mfg

 

[mr.strauss]

AW: hd+ 02 nicht hell

Teste mal dies hier

Spoiler

[reader]
label = hdplus02
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF...D5
boxkey = A7...7C
detect = cd
ecmwhitelist = 1843:89
### ab SVN 10505 oder höher
# wird diese Angabe von
# Cardmhz und
# mhz nicht mehr benötigt!
# Der wert autospeed sollte
# gesetzt (auf ein = 1) bleiben
###
### bis SVN 9100 diese Einstellungen aktivieren
#cardmhz = 2700
#autospeed = 1
### bis SVN 9099 diese Einstellungen benutzen
#mhz = 369
#cardmhz = 368
ident = 1843:000000,003411,008011
group = 1
emmcache = 1,3,2
auprovid = 003411

Ist aus dem Vu+ Wiki

 

[dodo83]

AW: hd+ 02 nicht hell

die karte wird nicht eingelesen

2015/03/14 11:33:00 543670 r (reader) hdplus02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us

2015/03/14 11:33:08 543670 r (reader) hdplus02 [internal] card system not supported

welche OScam Version?
die HD02 kann schon zickig sein

 

[rowdy76]

AW: hd+ 02 nicht hell

Du ich habe es auch nicht hin bekommen..
du musst die karte im zertifiziertem receiver freischalten..
erst dann im vu betreiben..

(Deine einstellung ist ok)

 

[zockerpit]

AW: hd+ 02 nicht hell

hallo,
ne läuft auch nicht

@dodo83
Version: oscam-1.20-unstable_svn-r10627
funktioniet mittlerweile eine hd+03 in der vu?
mfg

 

[dodo83]

AW: hd+ 02 nicht hell

welche OScam Version?
RSA/BOXKEY sind aber vollständig?

 

[mr.strauss]

AW: hd+ 02 nicht hell

zockerpit lass sie mal mit Scam laufen ob sie damit funktioniert

Edit:

Hier nochmal eine Konfiguration von jemanden aus dem VTi Forum womit die Karte laufen soll

Spoiler

[reader]
label = HDPLUS_DE_HD02
description = HD02 (NAGRA)
protocol = internal
device = /dev/sci1
caid = 1830,1843
rsakey = B***************************************************************************************************************************************************************************5
boxkey = A**********C
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,2,2

 

[zockerpit]

AW: hd+ 02 nicht hell

hallo,
habe den rasa/boxkey eingetragen, war nicht komplett
hier noch ein log

Spoiler

2015/03/14 12:14:31 77200468 c (dvbapi) Demuxer 0 new program number: EF75 (1830:EF75 unknown) [pmt_list_management 3]
2015/03/14 12:14:31 77200468 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
2015/03/14 12:14:32 5407D0 r (reader) emulator [emu] card detected
2015/03/14 12:14:32 540270 r (reader) hdplus02 [internal] card detected
2015/03/14 12:14:33 540270 r (reader) hdplus02 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2015/03/14 12:14:33 540270 r (reader) hdplus02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/03/14 12:14:33 540270 r (reader) hdplus02 [internal] Calculated work ETU is 7.11 us reader mhz = 450
2015/03/14 12:14:33 5407D0 r (reader) emulator [emu] found card system emu
2015/03/14 12:14:33 5407D0 r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/14 12:14:33 5407D0 r key file not found in: /etc/tuxbox/config
2015/03/14 12:14:33 5407D0 r reading key file: /var/keys/SoftCam.Key
2015/03/14 12:14:34 77200468 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 12:14:36 540270 r (reader) hdplus02 [internal] Buffers readed 0 bytes total time_us 3099633
2015/03/14 12:14:37 540270 r (reader) hdplus02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
2015/03/14 12:14:37 540270 r (reader) hdplus02 [internal] Card responded ok for ifsd request of 160
2015/03/14 12:14:37 77200468 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
2015/03/14 12:14:38 540270 r (reader) hdplus02 [internal] detect native nagra card
2015/03/14 12:14:39 540270 r (reader) hdplus02 [internal] ready for requests
2015/03/14 12:14:39 540270 r (reader) hdplus02 [internal] found card system nagra
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] ROM: D N A S P 1 8 0
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] REV: M e r 0 0 0
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] SER: ############
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] CAID: 1843
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] Prv.ID: 00 00 00 00
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] IRD ID: ############
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] active to: 2015/05/04 12:59
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] -----------------------------------------
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] |id |tier |valid from |valid to |
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] +----+--------+------------+------------+
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] |8011|0066 |2012/02/22 |2013/02/22 |
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] |8011|0067 |2010/01/19 |2010/01/20 |
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] |8011|0BEA |2014/02/08 |2015/03/16 |
2015/03/14 12:14:39 540270 r (reader) hdplus02 [nagra] -----------------------------------------
2015/03/14 12:14:40 77200468 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!

ist aber immer noch nicht hell
noch mal die frage, geht hd+03 mittlerweile ?
habe hier noch eine liegen

 

[supraracer]

AW: hd+ 02 nicht hell

Karte wird jetzt gelesen, ist aber abgelaufen. Musst du erst wieder bezahlen damit was hell wird.

-supraracer

 

[mr.strauss]

AW: hd+ 02 nicht hell

Hast auf RTl HD stehen? Kann eine Weile dauern bis es hell wird wenn alles stimmt!

 

[Zwenny]

AW: hd+ 02 nicht hell

noch mal die frage, geht hd+03 mittlerweile ?

geht nicht!

 

[zockerpit]

AW: hd+ 02 nicht hell

hallo,
was ist jetzt mit der hd+ 03, geht die mittlerweile in der vu+?
ich mache das hier für einen Bekannten, der hat mir auch noch eine hd+03 mitgegeben
die könnte ich probieren
mfg

- - - - - - - - - -

hallo,
@zwenny ok , danke , hat sich überschnitten.

 

[Bodo-1]

AW: hd+ 02 nicht hell

Hd03 geht nicht zu sharen

 

[Zwenny]

AW: hd+ 02 nicht hell

kannst du lesen?:emoticon-0136-giggl