GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

[GodzillaXXX]

Ich besitze eine aktivierte Sky V13 Karten (Oberseite Schwarz Chipseite Weiß). Auf Mcas läuft sie aber grade bei HD mit starkem Ruckelern daher wollte ich auf Oscam umsteigen da es dort besser laufen soll. Ich hab schon sämtliche Daten in die Oscam Config eigetragen aber nix funkt. ORF hab ich mittlerweile Hell bekommen. Kann mir mal jemanden alle Conifg datein die man braucht posten so wie sie funktionieren sollten für meine Receiver? Wäre nett. Falls ihr noch infos braucht einfach fragen. Info am rande bin noch ziemlich neu was das Thema angeht.

 

[Pilot]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Hallo Godzilla,

mit etwas Suche hättest du das auch gefunden: https://www.digital-eliteboard.com/...-oder-Client&p=1702904&viewfull=1#post1702904

Mlg piloten

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

hab alle einträge aus dem Bereich mit eigener Karte eingetragen. Orf weithin hell aber bei Sky tut sach rein garnichts. Gibt es noch irgendwelche Tricks?

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

wie sieht den dein Log aus?

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Wo genau find ich die log den?

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Sofern du die Configs von HIER benutzt, findest du das Web-Interface von Oscam wie folgt:
IP deines Recieversort also z.B. 192.168.178.22:16002
User und Passwort sollte oscam sein.

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

LOG:

Spoiler

013/05/19 13:06:27 1838 2AEC14C8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2013/05/19 13:06:27 1838 2AEC14C8 c dvbapi: new program number: 00F2 (1833:00F2 unknown)
2013/05/19 13:06:28 1838 2AEC14C8 c dvbapi: try pids again #1
2013/05/19 13:06:28 1838 2AEC14C8 c dvbapi (09C4&000000/00F2/1B0F/0000/B3:C512/00-00): not found (1 ms) by sky_v13
2013/05/19 13:06:31 1838 2AEC14C8 c dvbapi: try pids again #2
2013/05/19 13:06:31 1838 2AEC14C8 c dvbapi (09C4&000000/00F2/1B0F/0000/B3:C42B/00-00): not found (1 ms) by sky_v13
2013/05/19 13:06:33 1838 2AEC14C8 c dvbapi: try pids again #3
2013/05/19 13:06:33 1838 2AEC14C8 c dvbapi: can't decode channel
2013/05/19 13:06:33 1838 2AEC14C8 c dvbapi (09C4&000000/00F2/1B0F/0000/B3:C512/00-00): timeout (5046 ms) by sky_v13 (try 2)
2013/05/19 13:06:37 1838 2AEC14C8 c dvbapi: can't decode channel
2013/05/19 13:06:37 1838 2AEC14C8 c dvbapi (09C4&000000/00F2/1B0F/0000/B3:C42B/00-00): timeout (5259 ms) by sky_v13 (try 2)
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 0] CAID: 0D05 ECM_PID: 00DC PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 1] CAID: 0D95 ECM_PID: 010E PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 2] CAID: 0648 ECM_PID: 0078 PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 3] CAID: 1702 ECM_PID: 0140 PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 4] CAID: 1833 ECM_PID: 01A4 PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 5] CAID: 09C4 ECM_PID: 01E0 PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 6] CAID: 098C ECM_PID: 01EA PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 7] CAID: 0D98 ECM_PID: 0110 PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: [ADD PID 8] CAID: 0650 ECM_PID: 007A PROVID: 000000
2013/05/19 13:08:48 1838 2AEC14C8 c dvbapi: new program number: 132F (ORF 1 HD)
2013/05/19 13:08:49 1838 2AEC14C8 c dvbapi: Start descrambling PID #0 (CAID: 0D05) 1
2013/05/19 13:08:49 1838 2AEC14C8 c dvbapi (0D05&000004/132F/00DC/0000/9C:B628/E2-98): emu (203 ms)
2013/05/19 13:08:54 1838 2AEC14C8 c dvbapi (0D05&000004/132F/00DC/0000/9C:4F3E/47-98): emu (203 ms)
2013/05/19 13:09:04 1838 2AEC14C8 c dvbapi (0D05&000004/132F/00DC/0000/9C:F98A/47-01): emu (203 ms)
2013/05/19 13:09:14 1838 2AEC14C8 c dvbapi (0D05&000004/132F/00DC/0000/9C:6ADA/30-01): emu (322 ms)
2013/05/19 13:09:18 1838 2AEC14C8 c dvbapi: new program number: 445D (Pro7)

Anzeige über Log:[TABLE="class: status"]
[TR]
[TH]

Spoiler

[TABLE="class: status"]
[TR]
[TH]hide[/TH]
[TH]Thread ID[/TH]
[TH]Type[/TH]
[TH]ID[/TH]
[TH]Label[/TH]
[TH]AU[/TH]
[TH]Crypted[/TH]
[TH]Address[/TH]
[TH]Port[/TH]
[TH]Protocol[/TH]
[TH]Login[/TH]
[TH]Online[/TH]
[TH]CAID:SRVID[/TH]
[TH]Current Channel[/TH]
[TH]LB Value/ Reader[/TH]
[TH]Idle[/TH]
[TH]Status[/TH]
[/TR]
[TR="class: s"]
[TD="align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]296C1000[/TD]
[TD="align: center"]s[/TD]
[TD="align: center"]0[/TD]
[TD]root[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]server[/TD]
[TD="align: center"]19.05.13 13:05:16[/TD]
[TD="align: center"]00:37:29[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"]00:00:00[/TD]
[TD="align: center"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]2A6C14C8[/TD]
[TD="align: center"]h[/TD]
[TD="align: center"]1[/TD]
[TD]root[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]monitor[/TD]
[TD="align: center"]19.05.13 13:05:16[/TD]
[TD="align: center"]00:37:29[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"]00:00:00[/TD]
[TD="align: center"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]2B6C14C8[/TD]
[TD="align: center"]r[/TD]
[TD="align: center"]1[/TD]
[TD]sky_v13[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]internal[/TD]
[TD="align: center"]19.05.13 13:05:16[/TD]
[TD="align: center"]00:37:29[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]00:37:29[/TD]
[TD="align: center"]ERROR[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Clients 1/1 (0 with ECM within last 15 seconds)[/TD]
[/TR]
[TR="class: c"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]c[/TD]
[TD="align: center"]1[/TD]
[TD]dvbapi[/TD]
[TD="align: center"]-1[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0.0.0.0[/TD]
[TD="align: center"]0[/TD]
[TD]dvbapi[/TD]
[TD="align: center"]19.05.13 13:05:20[/TD]
[TD="align: center"]00:37:25[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"]00:33:27[/TD]
[TD="align: center"]OK[/TD]
[/TR]
[/TABLE]

[/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[TH][/TH]
[/TR]
[TR="class: s"]
[TD="width: 10, align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[/TR]
[TR="class: h"]
[TD="width: 10, align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"][/TD]
[/TR]
[TR="class: r"]
[TD="width: 10, align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"][/TD]
[/TR]
[TR="class: c"]
[TD="width: 10, align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[TD="align: center"][/TD]
[/TR]
[/TABLE]

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Deine Karte wird nicht richtig eingelesen.
Interessant währe jetzt ein Log vom Start des Readers. Beende und starte ihn mal bitte über das WebIf und poste das Log dann hier.
wie sieht deine oscam.server aus?

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

oscam.server

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t33 build #0
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = serverviaccam
protocol = cccam
device = name.dyndns.org oder IP,Port*
user = User*
password = Pass*
group = 1
cccversion = 2.3.0
ccckeepalive = 1

[reader]
label = sky_v13
protocol = internal
device = /dev/sci0
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 5
cardmhz = 5
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Und das Log?

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

meine Log seite is nicht grade die schnellste ^^

Log:

Spoiler

2013/05/19 13:57:30 1838 296C1000 s services reloaded: 0 services freed, 12 services loaded
2013/05/19 13:57:30 1838 296C1000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/05/19 13:57:30 1838 296C1000 s signal handling initialized (type=sysv)
2013/05/19 13:57:30 1838 296C1000 s 248 service-id's loaded
2013/05/19 13:57:30 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2013/05/19 13:57:30 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2013/05/19 13:57:30 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2013/05/19 13:57:30 1838 296C1000 s monitor: disabled
2013/05/19 13:57:30 1838 296C1000 s camd33: disabled
2013/05/19 13:57:30 1838 296C1000 s camd35: disabled
2013/05/19 13:57:30 1838 296C1000 s cs378x: disabled
2013/05/19 13:57:30 1838 296C1000 s newcamd: disabled
2013/05/19 13:57:30 1838 296C1000 s cccam: disabled
2013/05/19 13:57:30 1838 296C1000 s radegast: disabled
2013/05/19 13:57:30 1838 296C1000 s http thread started
2013/05/19 13:57:30 1838 296C1000 s creating thread for device name.dyndns.org oder IP
2013/05/19 13:57:30 1838 296C1000 s creating thread for device /dev/sci0
2013/05/19 13:57:30 1838 2AEC14C8 p proxy thread started (thread=2AEC14C8, label=serverviaccam, server=name.dyndns.org oder IP)
2013/05/19 13:57:30 1838 2AEC14C8 p serverviaccam invalid port 0 for server name.dyndns.org oder IP
2013/05/19 13:57:30 1838 296C1000 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/19 13:57:30 1838 296C1000 s waiting for local card init
2013/05/19 13:57:30 1838 2B6C14C8 r reader thread started (thread=2B6C14C8, label=sky_v13, device=/dev/sci0, detect=cd, mhz=5, cardmhz=5)
2013/05/19 13:57:30 1838 2A6C14C8 h HTTP Server listening on port 16002
2013/05/19 13:57:30 1838 2AEC14C8 p exit with signal 1
2013/05/19 13:57:30 1838 2AEC14C8 p thread 2AEC14C8 ended!
2013/05/19 13:57:30 1838 2B6C14C8 r sky_v13 card detected
2013/05/19 13:57:31 1838 2B6C14C8 r Error activating card.

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Lösch mal folgendes aus der oscam.server und starte Oscam neu:
ins7e11 = 15
mhz = 5
cardmhz = 5

Ist die Karte richtig drin?

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Ja karte ist richtig drin mit Mcas läuft sie mehr oder weniger ohne probleme. Sky immer noch dunkel

- - - - - - - - - -

aktuelle log:

Spoiler

2013/05/19 14:11:53 1838 296C1000 s auth size=17920
2013/05/19 14:11:53 1838 296C1000 s services reloaded: 0 services freed, 12 services loaded
2013/05/19 14:11:53 1838 296C1000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/05/19 14:11:53 1838 296C1000 s signal handling initialized (type=sysv)
2013/05/19 14:11:53 1838 296C1000 s 248 service-id's loaded
2013/05/19 14:11:53 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2013/05/19 14:11:53 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2013/05/19 14:11:53 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2013/05/19 14:11:53 1838 296C1000 s monitor: disabled
2013/05/19 14:11:53 1838 296C1000 s camd33: disabled
2013/05/19 14:11:53 1838 296C1000 s camd35: disabled
2013/05/19 14:11:53 1838 296C1000 s cs378x: disabled
2013/05/19 14:11:53 1838 296C1000 s newcamd: disabled
2013/05/19 14:11:53 1838 296C1000 s cccam: disabled
2013/05/19 14:11:53 1838 296C1000 s radegast: disabled
2013/05/19 14:11:53 1838 296C1000 s http thread started
2013/05/19 14:11:53 1838 296C1000 s creating thread for device name.dyndns.org oder IP
2013/05/19 14:11:53 1838 296C1000 s creating thread for device /dev/sci0
2013/05/19 14:11:53 1838 296C1000 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/19 14:11:53 1838 296C1000 s waiting for local card init
2013/05/19 14:11:53 1838 2AEC14C8 p proxy thread started (thread=2AEC14C8, label=serverviaccam, server=name.dyndns.org oder IP)
2013/05/19 14:11:53 1838 2AEC14C8 p serverviaccam invalid port 0 for server name.dyndns.org oder IP
2013/05/19 14:11:53 1838 2AEC14C8 p exit with signal 1
2013/05/19 14:11:53 1838 2AEC14C8 p thread 2AEC14C8 ended!
2013/05/19 14:11:53 1838 2B6C14C8 r reader thread started (thread=2B6C14C8, label=sky_v13, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/05/19 14:11:53 1838 2A6C14C8 h HTTP Server listening on port 16002
2013/05/19 14:11:53 1838 2B6C14C8 r sky_v13 card detected

Überlog:

Spoiler

[TABLE="class: status"]
[TR]
[TH]hide[/TH]
[TH]Thread ID[/TH]
[TH]Type[/TH]
[TH]ID[/TH]
[TH]Label[/TH]
[TH]AU[/TH]
[TH]Crypted[/TH]
[TH]Address[/TH]
[TH]Port[/TH]
[TH]Protocol[/TH]
[TH]Login[/TH]
[TH]Online[/TH]
[TH]CAID:SRVID[/TH]
[TH]Current Channel[/TH]
[TH]LB Value/ Reader[/TH]
[TH]Idle[/TH]
[TH]Status[/TH]
[/TR]
[TR="class: s"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]296C1000 [/TD]
[TD="align: center"]s[/TD]
[TD="align: center"]0[/TD]
[TD]root[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]server[/TD]
[TD="align: center"]19.05.13 14:11:53[/TD]
[TD="align: center"]00:00:02[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"]00:00:02[/TD]
[TD="align: center"]OK[/TD]
[/TR]
[TR="class: h"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]2A6C14C8 [/TD]
[TD="align: center"]h[/TD]
[TD="align: center"]1[/TD]
[TD]root[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]monitor[/TD]
[TD="align: center"]19.05.13 14:11:53[/TD]
[TD="align: center"]00:00:02[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"][/TD]
[TD="align: center"]00:00:00[/TD]
[TD="align: center"]OK[/TD]
[/TR]
[TR]
[TD="class: subheadline, colspan: 17"]Readers 0/1[/TD]
[/TR]
[TR="class: r"]
[TD="width: 10, align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]2B6C14C8 [/TD]
[TD="align: center"]r[/TD]
[TD="align: center"]1[/TD]
[TD]sky_v13[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]0[/TD]
[TD="align: center"]127.0.0.1[/TD]
[TD="align: center"]0[/TD]
[TD]internal[/TD]
[TD="align: center"]19.05.13 14:11:53[/TD]
[TD="align: center"]00:00:02[/TD]
[TD="align: center"]0000:0000[/TD]
[TD][/TD]
[TD="align: center"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="align: center"]00:00:02[/TD]
[TD="align: center"]NEEDINIT[/TD]
[/TR]
[/TABLE]

 

[Alex]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Ab jier wird das Log interessant:
2013/05/19 14:11:53 1838 2B6C14C8 r reader thread started (thread=2B6C14C8, label=sky_v13, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/05/19 14:11:53 1838 2A6C14C8 h HTTP Server listening on port 16002
2013/05/19 14:11:53 1838 2B6C14C8 r sky_v13 card detected

Schade das es da endet

 

[GodzillaXXX]

AW: GM 990 CR Reloaded Sky V13 wird nicht hell über Oscam

Log nach restart:

Spoiler

2013/05/19 14:19:07 1838 296C1000 s services reloaded: 0 services freed, 12 services loaded
2013/05/19 14:19:07 1838 296C1000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/05/19 14:19:07 1838 296C1000 s signal handling initialized (type=sysv)
2013/05/19 14:19:07 1838 296C1000 s 248 service-id's loaded
2013/05/19 14:19:07 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.tiers" (err=2), no tier-id's loaded
2013/05/19 14:19:07 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.provid" (err=2), no provids's loaded
2013/05/19 14:19:07 1838 296C1000 s can't open file "/var/tuxbox/config/oscam.ird" (errno=2) irdeto guessing not loaded
2013/05/19 14:19:07 1838 296C1000 s monitor: disabled
2013/05/19 14:19:07 1838 296C1000 s camd33: disabled
2013/05/19 14:19:07 1838 296C1000 s camd35: disabled
2013/05/19 14:19:07 1838 296C1000 s cs378x: disabled
2013/05/19 14:19:07 1838 296C1000 s newcamd: disabled
2013/05/19 14:19:07 1838 296C1000 s cccam: disabled
2013/05/19 14:19:07 1838 296C1000 s radegast: disabled
2013/05/19 14:19:07 1838 296C1000 s http thread started
2013/05/19 14:19:07 1838 296C1000 s creating thread for device name.dyndns.org oder IP
2013/05/19 14:19:07 1838 296C1000 s creating thread for device /dev/sci0
2013/05/19 14:19:07 1838 296C1000 s loadbalancer: can't read from file /tmp/.oscam/stat
2013/05/19 14:19:07 1838 296C1000 s waiting for local card init
2013/05/19 14:19:07 1838 2B6C14C8 r reader thread started (thread=2B6C14C8, label=sky_v13, device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2013/05/19 14:19:07 1838 2AEC14C8 p proxy thread started (thread=2AEC14C8, label=serverviaccam, server=name.dyndns.org oder IP)
2013/05/19 14:19:07 1838 2AEC14C8 p serverviaccam invalid port 0 for server name.dyndns.org oder IP
2013/05/19 14:19:07 1838 2AEC14C8 p exit with signal 1
2013/05/19 14:19:07 1838 2AEC14C8 p thread 2AEC14C8 ended!
2013/05/19 14:19:07 1838 2A6C14C8 h HTTP Server listening on port 16002
2013/05/19 14:19:07 1838 2B6C14C8 r sky_v13 card detected
2013/05/19 14:19:08 1838 2B6C14C8 r Error activating card.