Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

[KalleAnka]

Moin zusammen,

nachdem ich mich nun durch viele Posts und oscam Konfigurationen gelesen habe muss ich mich nun doch einmal an euch wenden:

Folgende Konfiguration:

oscam läuft seit Ende 2012 stabil auf einem Raspberry Pi mit einer Hd+ Karte in einem Smargo Reader (config s.u.)

client ist ein vdr mit vdr-sc (yavdr 0.5a frisch aufgesetzt)


Nun habe ich auch noch Sky mit einer V14 Karte. Nach einigem rumprobieren wird die Karte erkannt,
im webif meldet oscam CARDOK

Sie müssen registriert sein, um Links zu sehen.

Wenn ich im vdr auf einen Sky Kanal schalte, meldet sich das vdr-sc als sky_user im oscam an, es kommt aber die Fehlermeldung

rejected group (1 ms) (0/0/0/0) (no matching reader)

Spoiler

2014/01/10 17:21:10 1B49D28 c client connected to 10002 port
2014/01/10 17:21:10 1B49D28 c encrypted newcamd:10002-client 192.168.13.5 granted (sky_user, au=on (1 reader))
2014/01/10 17:21:10 1B49D28 c user sky_user authenticated successfully (generic)
2014/01/10 17:21:10 1B49D28 c AU disabled for user sky_user
2014/01/10 17:21:11 1B4B9B8 c client connected to 10001 port
2014/01/10 17:21:11 1B4B9B8 c encrypted newcamd:10001-client 192.168.13.5 granted (sky_user, au=on (1 reader))
2014/01/10 17:21:11 1B4B9B8 c user sky_user authenticated successfully (generic)
2014/01/10 17:21:11 1B4B9B8 c AU disabled for user sky_user
2014/01/10 17:21:23 1B4B9B8 c sky_user (1702&000000/0000/006E/B3:3980): rejected group (1 ms) (0/0/0/0) (no matching reader)

Hier meine Konfiguration


oscam.conf

Spoiler

...
[newcamd]
port = 10000@1830:003411;10001@1702:000000;10002@1833:000000
key = 00...
keepalive = 1

...

oscam.reader

Spoiler

[reader]
label = hdplus_reader
protocol = smartreader
device = 001:005
caid = 1830
rsakey = BF... ...D5
boxkey = A7...
detect = cd
mhz = 369
cardmhz = 368
ident = 1830:003411
group = 1
emmcache = 1,3,2



[reader]
label = sky_reader
description = sky2smargo
protocol = smartreader
device = 001:007
services = sky,sky-hd,!sky-hd
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 13
detect = cd
mhz = 369
cardmhz = 369
ident = 098C:000000
group = 1
emmcache = 1,2,0
audisabled = 1
ndsversion = 2

cardclient.conf

Spoiler

newcamd:192.168.13.4:10000:1/1830/FFFF:hdplus_userass:key
newcamd:192.168.13.4:10001:1/1702/FFFF:sky_userass:key
newcamd:192.168.13.4:10002:1/1833/FFFF:sky_userass:key

oscam.log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Jan 10 17:29:26 2014
-------------------------------------------------------------------------------
2014/01/10 17:29:26 0 s starting thread log_list_thread
2014/01/10 17:29:26 0 s log_list_thread thread started
2014/01/10 17:29:26 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7881 (arm-linux-gnueabihf)
2014/01/10 17:29:26 0 s version=1.20-unstable_svn, build #7881, system=arm-linux-gnueabihf, nice=-5
2014/01/10 17:29:26 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2014/01/10 17:29:26 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2014/01/10 17:29:26 0 s client timeout=7000 ms, fallback timeout=3000 ms, cache delay=0 ms
2014/01/10 17:29:26 0 s services reloaded: 0 services freed, 7 services loaded, rejected 0
2014/01/10 17:29:26 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/01/10 17:29:26 0 s signal handling initialized (type=sysv)
2014/01/10 17:29:26 0 s 9 service-id's loaded in 1ms
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s monitor: initialized (fd=5, port=988)
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s camd35: disabled
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s cs378x: disabled
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s newcamd: initialized (fd=6, port=10000, crypted)
2014/01/10 17:29:26 0 s -> CAID: 1830 PROVID: 003411
2014/01/10 17:29:26 0 s Starting listener 1
2014/01/10 17:29:26 0 s newcamd: initialized (fd=7, port=10001, crypted)
2014/01/10 17:29:26 0 s -> CAID: 1702 PROVID: 000000
2014/01/10 17:29:26 0 s Starting listener 2
2014/01/10 17:29:26 0 s newcamd: initialized (fd=8, port=10002, crypted)
2014/01/10 17:29:26 0 s -> CAID: 1833 PROVID: 000000
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s pandora: disabled
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s csp: disabled
2014/01/10 17:29:26 0 s Starting listener 0
2014/01/10 17:29:26 0 s radegast: disabled
2014/01/10 17:29:26 0 s starting thread http
2014/01/10 17:29:26 0 s http thread started
2014/01/10 17:29:26 0 s starting thread reader check
2014/01/10 17:29:26 0 s reader check thread started
2014/01/10 17:29:26 0 s starting thread check
2014/01/10 17:29:26 0 s check thread started
2014/01/10 17:29:26 0 s hdplus_reader [smartreader] creating thread for device 001:005
2014/01/10 17:29:26 0 s sky_reader [smartreader] creating thread for device 001:007
2014/01/10 17:29:26 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/01/10 17:29:26 0 s anti cascading disabled
2014/01/10 17:29:26 1B44C40 h HTTP Server listening on port 8888
2014/01/10 17:29:26 1B3ABF8 r hdplus_reader [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2014/01/10 17:29:26 1B3ABF8 r Found smartreader device 001:005
2014/01/10 17:29:26 1B3C5A0 r sky_reader [smartreader] Using 0x82 as endpoint for smartreader hardware detection
2014/01/10 17:29:26 1B3C5A0 r Found smartreader device 001:007
2014/01/10 17:29:26 1B3ABF8 r hdplus_reader [smartreader] Reader initialized (device=001:005, detect=cd, mhz=369, cardmhz=368)
2014/01/10 17:29:26 1B3C5A0 r sky_reader [smartreader] Reader initialized (device=001:007, detect=cd, mhz=369, cardmhz=369)
2014/01/10 17:29:27 1B3C5A0 r sky_reader [smartreader] card detected
2014/01/10 17:29:27 1B3ABF8 r hdplus_reader [smartreader] card detected
2014/01/10 17:29:30 1B3C5A0 r sky_reader [smartreader] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/01/10 17:29:30 1B3C5A0 r sky_reader [smartreader] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/10 17:29:30 1B3C5A0 r sky_reader [smartreader] Setting baudrate to 39677 bps
2014/01/10 17:29:30 1B3C5A0 r sky_reader [smartreader] Calculated work ETU is 25.20 us
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] Setting baudrate to 115200 bps
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] Calculated work ETU is 8.67 us
2014/01/10 17:29:30 1B3C5A0 r sky_reader [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.69 Mhz (specified in reader->mhz)
2014/01/10 17:29:30 1B3ABF8 r hdplus_reader [smartreader] Card responded ok for ifsd request of 251
2014/01/10 17:29:31 1B3ABF8 r hdplus_reader [smartreader] detect native nagra card
2014/01/10 17:29:31 1B3C5A0 r sky_reader [smartreader] Card type: P1TV
2014/01/10 17:29:31 1B3C5A0 r sky_reader [smartreader] Rom version: 20AA
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] type: NAGRA, caid: 1830, IRD ID: ############
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] ProviderID: 00 00 34 11
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] active to: 2014/03/03 11:59
2014/01/10 17:29:32 1B3C5A0 r sky_reader [smartreader] parental lock setting: FF FF FF FF
2014/01/10 17:29:32 1B3C5A0 r sky_reader [smartreader] type: VideoGuard Sky Germany (098C), caid: 098C
2014/01/10 17:29:32 1B3C5A0 r sky_reader [smartreader] serial: ########, BoxID: ########, baseyear: 2004
2014/01/10 17:29:32 1B3C5A0 r sky_reader [smartreader] ready for requests
2014/01/10 17:29:32 1B3C5A0 r sky_reader [smartreader] found card system videoguard2
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] card detected
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] type: VideoGuard Sky Germany (098C)
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0046, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 005d, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 005e, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0065, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0066, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0067, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0068, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 0069, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 006a, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 006b, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 006f, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] -----------------------------------------
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] |id |tier |valid from |valid to |
2014/01/10 17:29:32 1B3ABF8 r hdplus_reader [smartreader] +----+--------+------------+------------+
2014/01/10 17:29:32 1B3C5A0 r sky_reader [videoguard2] tier: 007b, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 007d, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 0081, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 008e, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00c0, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [smartreader] |8011|0065 |1992/01/01 |1993/01/01 |
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00c7, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00c8, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00c9, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00ca, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00e4, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [smartreader] |8011|0064 |2010/10/20 |2011/10/21 |
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00e5, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00f3, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00fa, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3C5A0 r sky_reader [videoguard2] tier: 00ff, expiry date: 2014/05/03-01:00:00
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [smartreader] |8011|0BEA |2011/10/24 |2014/12/29 |
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [smartreader] -----------------------------------------
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [smartreader] found card system nagra
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] ROM: D N A S P 1 4 2
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] REV: R e v G C 6
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] SER: ############
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] CAID: 1830
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] Prv.ID: 00 00 00 00
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] Prv.ID: 00 00 80 11
2014/01/10 17:29:33 1B3ABF8 r hdplus_reader [nagra] ready for requests
2014/01/10 17:29:33 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build #7881 (arm-linux-gnueabihf)
2014/01/10 17:29:33 0 version=1.20-unstable_svn, build #7881, system=arm-linux-gnueabihf, nice=-5
2014/01/10 17:29:33 0 client max. idle=120 sec, debug level=0, filter_sensitive=1
2014/01/10 17:29:33 0 max. logsize=10 Kb, loghistorysize=4096 bytes
2014/01/10 17:29:33 0 client timeout=7000 ms, fallback timeout=3000 ms, cache delay=0 ms

Hat jemand eine Idee wo es klemmt ?


Danke schon einmal
Gruß
KalleAnka

 

[janni1]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
du hast mit Sky Atlantic HD getestet.
Würden SD-Kanäle laufen?
Hast du einen Betatunnel gesetzt im oscam.user oder in der override.conf von vdr-sc?

Edit: Alles Quatsch, du hast ja eine V14, da brauchts keinen Tunnel,sorry!

Du hast die falsche Caid in der Newcamd-section und in der cardclient.conf für die V14. Du brauchst hier auch die 098C.

Gruß
janni1

 

[KalleAnka]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Hallo janni1

nein bei SD Kanälen ist das gleiche verhalten.


Bedeutet das dann den Betatunnel raus und 098C an die betreffenden stellen ? ich probiers mal


oscam.user

Spoiler

account]
User = monitor
Pwd = monitor
MonLevel = 2

[account]
User = hdplus_user
Pwd = pass
Group = 1,2
AU = hdplus_reader
CAID = 1830
IDENT = 1830:003411
MonLevel = 0

[account]
User = sky_user
PWD = pass
Group = 1,2
AU = sky_reader
CAID = 1702,1833
IDENT = 1702:000000;1833:000000
Betatunnel = 1833.FFFF:1702

Danke
KalleAnka

 

[janni1]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
ja fast so.
als erstes mußt du in der oscam.conf die [newcamd]-sektion korrigieren.

[newcamd]
port = 10000@1830:003411;10001@098C:000000
....

dann den User anpassen

User = sky_user
PWD = pass
Group = 1,2
AU = sky_reader
CAID = 098C

und nun noch die cardclient.conf

newcamd:192.168.13.4:10000:1/1830/FFFF:hdplus_userass:key
newcamd:192.168.13.4:10001:1/098C/FFFF:sky_userass:key

und vieleicht noch in der override.conf die 098C und 1830 priorisieren

ecmprio:{S19.2E:}098C:1830

so ungefähr müßte es funktionieren, denk ich.

Gruß
janni1

 

[KalleAnka]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,

kaum macht man es richtig geht es :emoticon-0137-clapp


(war noch ein Fehler in der Konfig des readers services = sky,sky-hd,!sky-hd)




Vielen dank und schönes WE
KalleAnka

 

[janni1]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
hier hast du noch einen Fehler drin:

[reader]
label = sky_reader
description = sky2smargo
protocol = smartreader
device = 001:007
services = sky,sky-hd,!sky-hd
smargopatch = 1
caid = 098C
boxid = 12345678
ins7e11 = 13
detect = cd
mhz = 369
cardmhz = 369
ident = 098C:000000
group = 1
emmcache = 1,2,0
audisabled = 1
ndsversion = 2

Das Rote muß raus! Damit verbietest du ja alles was bei sky-hd drin steht.

Gruß
janni1

 

[KalleAnka]

AW: vdr-sc <-> oscam (smargo) <-> Sky V14

Ja

hatte ich auch gesehen, einmal zuviel geklickt, man sollte bei den conf Dateien bleiben

Trotzdem danke, Problem gelöst

KalleAnka

 

[snIP3r]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

hi leute!

vllt koenntet ihr mir auch helfen, denn seit dem umstieg auf die v14 geht bei mir auch nichts mehr mit dem vdr-sc, allerding benutze ich cccam.
hier meine config:
oscam.server:

[account]
user = vdr
pwd = PWD
caid = 098C, 1830
suppresscmd08 = 1
keepalive = 1
group = 1,2,3
services = !sky_hd+
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 1
cccstealth = 1
numusers = 0
penalty = 0

und die cardclient.conf

cccam2:ZIELSERVER:12000:0/0000/0000:vdrWD

ich bekomme beim start des vdr aber nur folgende caids: CAM 1: system ids: 09C4 1833 1702 0D05 0650 0D98 1830

was mache ich falsch???

greets
snIP3r

 

[janni1]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
das sind aber nicht die richtigen Einträge für eine oscam.server, eher für eine oscam.user.

Poste mal bitte alle configs, oscam.conf, -.server und - .user.
Wird die Karte denn korrekt erkannt?
Außerdem wäre ein Log von vdr-sc interessant.

Gruß
janni1

 

[snIP3r]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

aehhhh ja. ist ne oscam.user...
also dann hier nochmal alle configs:
oscam.conf:

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7638
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /var/log/oscam.log
fallbacktimeout = 2000
cachedelay = 120
bindwait = 60
unlockparental = 1
nice = -15
maxlogsize = 30000
preferlocalcards = 1
lb_mode = 1
lb_save = 200
lb_reopen_mode = 1
failbantime = 600
failbancount = 2

[cs357x]
port = 16000

[cccam]
port = 12000
nodeid = 89C73AE5102B14DE
version = 2.2.1
reshare = 1
reshare_mode = 1
ignorereshare = 1
stealth = 1
minimizecards = 1

[webif]
httpport = 16002
httpuser = USER
httppwd = PWD
httprefresh = 10
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255

oscam.server

Spoiler

[reader]
label = sky_01
description = 2E3ADA5
protocol = smartreader
device = Serial:Reader 2E3ADA5
key = BD3494AD3459D65AB19273434AD6
caid = 098C
boxid = 12345678
ins7e11 = 15
boxkey = 1122334455667788
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 300
auprovid = 000098
ndsversion = 2

[reader]
label = sky_02
protocol = smartreader
device = Serial:Reader 5308053
key = BD3494AD3459D65AB19273434AD6
caid = 098C
boxid = 12345678
ins7e11 = 15
boxkey = 1122334455667788
detect = cd
mhz = 480
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
lb_weight = 300
ndsversion = 2

osacm.user

Spoiler

[account]
user = vdr
pwd = PWD
caid = 09C4,098C,1830
suppresscmd08 = 1
keepalive = 1
group = 1
services = !sky_hd+
cccmaxhops = 3
cccreshare = 1
cccignorereshare = 1
cccstealth = 1
numusers = 0
penalty = 0

auf vdr seite:
cardclient.conf

Spoiler

cccam2:ZIELSERVER:12000:0/0000/0000:vdrWD

und dann noch ne ausgabe vom vdr debug level 3:

Spoiler

May 15 14:59:19 area52 vdr: [28165] VDR version 2.1.4 started
May 15 14:59:19 area52 vdr: [28165] switched to user 'vdr'
May 15 14:59:19 area52 vdr: [28165] running as daemon (tid=28165)
May 15 14:59:19 area52 vdr: [28165] codeset is 'UTF-8' - known
May 15 14:59:19 area52 vdr: [28165] found 0 locales in /usr/share/locale
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'deu,ger'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'slv,slo'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'ita'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'dut,nla,nld'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'prt'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'fra,fre'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'nor'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'fin,suo'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'pol'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'esl,spa'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'ell,gre'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'sve,swe'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'rom,rum'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'hun'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'cat,cln'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'rus'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'srb,srp,scr,scc'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'hrv'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'est'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'dan'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'cze,ces'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'tur'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'ukr'
May 15 14:59:19 area52 vdr: [28165] no locale for language code 'ara'
May 15 14:59:19 area52 vdr: [28165] loading plugin: /usr/lib64/vdr/plugins/libvdr-sc.so.2.1.4
May 15 14:59:19 area52 vdr: [28165] cTimeMs: using monotonic clock (resolution is 1 ns)
May 15 14:59:19 area52 vdr: [28165] [general.debug] using new 1.7.11+ capture code
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/setup.conf
May 15 14:59:19 area52 vdr: [28165] ERROR: unknown config parameter: ChannelBindingByRid = 0
May 15 14:59:19 area52 vdr: [28165] ERROR: unknown config parameter: PrimaryLimit = 0
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/sources.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/diseqc.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/scr.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/channels.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/timers.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/commands.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/reccmds.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/svdrphosts.conf
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/keymacros.conf
May 15 14:59:19 area52 vdr: New default svdrp port 6419!
May 15 14:59:19 area52 vdr: [28165] registered source parameters for 'A - ATSC'
May 15 14:59:19 area52 vdr: [28165] registered source parameters for 'C - DVB-C'
May 15 14:59:19 area52 vdr: [28165] registered source parameters for 'S - DVB-S'
May 15 14:59:19 area52 vdr: [28165] registered source parameters for 'T - DVB-T'
May 15 14:59:19 area52 vdr: [28165] probing /dev/dvb/adapter0/frontend0
May 15 14:59:19 area52 vdr: [28165] [general.debug] capturing device 0/0 (subsystem ID 13c2101c)
May 15 14:59:19 area52 vdr: [28165] [general.debug] creating standard device 0/0
May 15 14:59:19 area52 vdr: [28165] new device number 1
May 15 14:59:19 area52 vdr: [28165] DVB API version is 0x0504 (VDR was built with 0x050A)
May 15 14:59:19 area52 vdr: [28165] frontend 0/0 provides DVB-S,DVB-S2 with QPSK ("STV090x Multistandard")
May 15 14:59:19 area52 vdr: [28165] probing /dev/dvb/adapter1/frontend0
May 15 14:59:19 area52 vdr: [28165] [general.debug] capturing device 1/0 (subsystem ID 13c2101c)
May 15 14:59:19 area52 vdr: [28165] [general.debug] creating standard device 1/0
May 15 14:59:19 area52 vdr: [28165] new device number 2
May 15 14:59:19 area52 vdr: [28165] frontend 1/0 provides DVB-S,DVB-S2 with QPSK ("STV090x Multistandard")
May 15 14:59:19 area52 vdr: [28165] found 2 DVB devices
May 15 14:59:19 area52 vdr: [28165] initializing plugin: sc (1.0.0pre-AR-29b7b5f231c8): A software emulated CAM
May 15 14:59:19 area52 vdr: [28165] [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 initializing (VDR 2.1.4)
May 15 14:59:19 area52 vdr: [28165] setting primary device to 1
May 15 14:59:19 area52 vdr: [28165] device 1 has no MPEG decoder
May 15 14:59:19 area52 vdr: [28165] assuming manual start of VDR
May 15 14:59:19 area52 vdr: [28165] SVDRP listening on port 2001
May 15 14:59:19 area52 vdr: [28165] setting current skin to "sttng"
May 15 14:59:19 area52 vdr: [28165] loading /etc/vdr/themes/sttng-default.theme
May 15 14:59:19 area52 vdr: [28165] starting plugin: sc
May 15 14:59:19 area52 vdr: [28165] [general.info] SC version 1.0.0pre-AR-29b7b5f231c8 starting (VDR 2.1.4)
May 15 14:59:19 area52 vdr: [28165] [general.info] loading cardclient config from /etc/vdr/plugins/sc/cardclient.conf
May 15 14:59:19 area52 vdr: [28181] section handler thread started (pid=28165, tid=28181, prio=low)
May 15 14:59:19 area52 vdr: [28182] tuner on frontend 1/0 thread started (pid=28165, tid=28182, prio=high)
May 15 14:59:19 area52 vdr: [28180] tuner on frontend 0/0 thread started (pid=28165, tid=28180, prio=high)
May 15 14:59:19 area52 vdr: [28179] epg data reader thread started (pid=28165, tid=28179, prio=high)
May 15 14:59:19 area52 vdr: [28179] reading EPG data from /var/cache/vdr/epg.data
May 15 14:59:19 area52 vdr: [28178] video directory scanner thread started (pid=28165, tid=28178, prio=high)
May 15 14:59:19 area52 vdr: [28177] video directory scanner thread started (pid=28165, tid=28177, prio=high)
May 15 14:59:19 area52 vdr: [28178] video directory scanner thread ended (pid=28165, tid=28178)
May 15 14:59:19 area52 vdr: [28183] section handler thread started (pid=28165, tid=28183, prio=low)
May 15 14:59:19 area52 vdr: [28177] video directory scanner thread ended (pid=28165, tid=28177)
May 15 14:59:19 area52 vdr: [28201] Netwatcher thread started (pid=28165, tid=28201, prio=high)
May 15 14:59:20 area52 vdr: [28165] [general.info] loading overrides from /etc/vdr/plugins/sc/override.conf
May 15 14:59:20 area52 vdr: [28165] [general.error] failed open /etc/vdr/plugins/sc/smartcard.conf: No such file or directory
May 15 14:59:20 area52 vdr: [28165] [general.error] failed open /etc/vdr/plugins/sc/cardslot.conf: No such file or directory
May 15 14:59:20 area52 vdr: [28165] [general.info] loading ecm cache from /etc/vdr/plugins/sc/ecm.cache
May 15 14:59:20 area52 vdr: [28165] [general.error] failed open /etc/vdr/plugins/sc/SoftCam.Key: No such file or directory
May 15 14:59:20 area52 vdr: [28165] [general.error] no keys loaded for softcam!
May 15 14:59:20 area52 vdr: [28165] [general.info] Using software decryption on card 1/0
May 15 14:59:20 area52 vdr: [28165] [general.info] Using software decryption on card 0/0
May 15 14:59:20 area52 vdr: [28203] SC-CI adapter on device 1/0 thread started (pid=28165, tid=28203, prio=high)
May 15 14:59:20 area52 vdr: [28202] CCcam2 reader thread started (pid=28165, tid=28202, prio=high)
May 15 14:59:20 area52 vdr: [28205] SC housekeeper thread started (pid=28165, tid=28205, prio=high)
May 15 14:59:20 area52 vdr: [28204] SC-CI adapter on device 0/0 thread started (pid=28165, tid=28204, prio=high)
May 15 14:59:20 area52 vdr: [28179] epg data reader thread ended (pid=28165, tid=28179)
May 15 14:59:22 area52 vdr: [28203] CAM 1: module ready
May 15 14:59:22 area52 vdr: [28204] CAM 2: module ready
May 15 14:59:22 area52 vdr: [28203] CAM 1: system ids: 09C4 1833 1702 0D05 0650 0D98 1830
May 15 14:59:22 area52 vdr: [28204] CAM 2: system ids: 09C4 1833 1702 0D05 0650 0D98 1830
May 15 14:59:23 area52 vdr: [28203] CAM 1: replies to QUERY - multi channel decryption possible
May 15 14:59:23 area52 vdr: [28204] CAM 2: replies to QUERY - multi channel decryption possible
May 15 14:59:23 area52 vdr: [28165] switching to channel 1
May 15 14:59:23 area52 vdr: [28165] setting watchdog timer to 60 seconds
May 15 14:59:23 area52 vdr: [28165] OSD size changed to 720x480 @ 1
May 15 14:59:23 area52 vdr: [28165] ERROR: no OSD provider available - using dummy OSD!

wobei die relevante info die hier sein duerfte:
May 15 14:59:22 area52 vdr: [28203] CAM 1: system ids: 09C4 1833 1702 0D05 0650 0D98 1830
May 15 14:59:22 area52 vdr: [28204] CAM 2: system ids: 09C4 1833 1702 0D05 0650 0D98 1830

so, ich denke das ist jetzt alles...

hoffe einer von euch kann mir weiterhelfen...
snIP3r

 

[janni1]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
werden die Karten in oscam richtg erkannt?
Ist der User "VDR" verbunden?
Wie lauten die Einträge in deiner override.conf ? Ignorierst du da zufällig die gebrauchten Caids?

Gruß
janni1

 

[snIP3r]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

perfekt - you saved my day!!!! override.conf war genau das thema! ich hatte in der override.conf die caid 098c als ignore eingetragen und das loeschen hat die loesung gebracht! jetzt gehts wieder! danke!!!

 

[janni1]

AW: Gelöst: vdr-sc <-> oscam (smargo) <-> Sky V14

Hi,
na das freut mich.
Und danke für die Rückmeldung!

Gruß
janni1