D
Deleted member 456734
Guest
Hallo liebe all,
ich habe mein Sky-Abo gekündigt und versuche nun gerade, die HD04 Karte in meinem Setup zu Laufen zu bekommen. Nach ca. 5 Stunden verschiedener Versuche und Foren-Recherche in Kombination mit dem Frauchen im Nacken bin ich nun ausreichend verzweifelt aktiv nachzufragen. ;-)
Mein Setup:
Rasberry Pi als OSCAM-Server
VU Uno4k SE mit OSCAM als Client
Leider bekomme ich die Karte nicht aktiviert und auch die Sender nicht hell. Das Logfile auf dem Raspberry sagt:
Hat von euch jemand eine Idee, wo mein Fehler liegt? Ich finde es einfach nicht...
Vielen Dank schon vorab!
Viele Grüße
Steff
ich habe mein Sky-Abo gekündigt und versuche nun gerade, die HD04 Karte in meinem Setup zu Laufen zu bekommen. Nach ca. 5 Stunden verschiedener Versuche und Foren-Recherche in Kombination mit dem Frauchen im Nacken bin ich nun ausreichend verzweifelt aktiv nachzufragen. ;-)
Mein Setup:
Rasberry Pi als OSCAM-Server
[reader]
label = HD+
protocol = mouse
device = /dev/ttyUSB_oscamReader
caid = 186A
mod1 = 9D***
data50 = B6***
mod50 = DB***
key60 = 99***
exp60 = 26***
nuid = 84***
cwekey = 1B***
ecmnotfoundlimit = 1
detect = cd
group = 1
emmcache = 1,1,2,0
label = HD+
protocol = mouse
device = /dev/ttyUSB_oscamReader
caid = 186A
mod1 = 9D***
data50 = B6***
mod50 = DB***
key60 = 99***
exp60 = 26***
nuid = 84***
cwekey = 1B***
ecmnotfoundlimit = 1
detect = cd
group = 1
emmcache = 1,1,2,0
[global]
logfile = /var/log/oscam.log
unlockparental = 1
preferlocalcards = 1
emmlogdir = /var/log/emms/
[cs357x]
port = 20197
[cs378x]
port = 30001
[newcamd]
port = 10009@186A:000000
key = 8264619735193746008462815414
[cccam]
port = 30000
nodeid = 8B0358AC10C6149C
version = 2.3.0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = localhost
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[monitor]
port = 988
nocrypt = 192.168.1.0-192.168.255.255
aulow = 120
[webif]
httpport = 8081
httpuser = <myuser>
httppwd = <mypwd>
httphelplang = de
httplocale = de_DE.utf8
httprefresh = 30
httpallowed = 127.0.0.1,192.168.178.0-192.168.178.255
aulow = 120
logfile = /var/log/oscam.log
unlockparental = 1
preferlocalcards = 1
emmlogdir = /var/log/emms/
[cs357x]
port = 20197
[cs378x]
port = 30001
[newcamd]
port = 10009@186A:000000
key = 8264619735193746008462815414
[cccam]
port = 30000
nodeid = 8B0358AC10C6149C
version = 2.3.0
[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
user = localhost
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 2
boxtype = dreambox
[monitor]
port = 988
nocrypt = 192.168.1.0-192.168.255.255
aulow = 120
[webif]
httpport = 8081
httpuser = <myuser>
httppwd = <mypwd>
httphelplang = de
httplocale = de_DE.utf8
httprefresh = 30
httpallowed = 127.0.0.1,192.168.178.0-192.168.178.255
aulow = 120
VU Uno4k SE mit OSCAM als Client
[reader]
label = cs378x_remote
protocol = cs378x
device = 192.168.178.23,30001
user = <myuser>
password = <mypwd>
keepalive = 1
reconnecttimeout = 60
group = 1
emmcache = 1,1,2,0
label = cs378x_remote
protocol = cs378x
device = 192.168.178.23,30001
user = <myuser>
password = <mypwd>
keepalive = 1
reconnecttimeout = 60
group = 1
emmcache = 1,1,2,0
[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0
[dvbapi]
enabled = 1
au = 1
user = <myuser>
boxtype = dreambox
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0
[dvbapi]
enabled = 1
au = 1
user = <myuser>
boxtype = dreambox
Leider bekomme ich die Karte nicht aktiviert und auch die Sender nicht hell. Das Logfile auf dem Raspberry sagt:
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Sun Nov 10 15:55:23 2019
-------------------------------------------------------------------------------
2019/11/10 15:55:23 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11517 (arm-linux-gnueabihf-ssl)
2019/11/10 15:55:23 00000000 s (main) System name = Linux
2019/11/10 15:55:23 00000000 s (main) Host name = oscam
2019/11/10 15:55:23 00000000 s (main) Release = 4.14.98-v7+
2019/11/10 15:55:23 00000000 s (main) Version = #1200 SMP Tue Feb 12 20:27:48 GMT 2019
2019/11/10 15:55:23 00000000 s (main) Machine = armv7l
2019/11/10 15:55:23 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14593
2019/11/10 15:55:23 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2019/11/10 15:55:23 00000000 s (main) signal handling initialized
2019/11/10 15:55:23 00000000 s (net) monitor: initialized (fd=5, port=988)
2019/11/10 15:55:23 00000000 s (net) cs357x: initialized (fd=6, port=20197)
2019/11/10 15:55:23 00000000 s (net) cs378x: initialized (fd=7, port=30001)
2019/11/10 15:55:23 00000000 s (net) newcamd: initialized (fd=8, port=10009)
2019/11/10 15:55:23 00000000 s (net) -> CAID: 186A PROVID: 000000
2019/11/10 15:55:23 00000000 s (net) cccam: initialized (fd=9, port=30000)
2019/11/10 15:55:23 00000000 s (reader) HD+ [mouse] creating thread for device /dev/ttyUSB_oscamReader
2019/11/10 15:55:23 00000000 s (main) waiting for local card init
2019/11/10 15:55:23 44DE7FC2 h (webif) webif: decompressed 170988 bytes back into 410428 bytes
2019/11/10 15:55:23 44DE7FC2 h (webif) HTTP Server running. ip=0.0.0.0 port=8081
2019/11/10 15:55:23 06D8CF83 r (reader) HD+ [mouse] Reader initialized (device=/dev/ttyUSB_oscamReader, detect=cd, mhz=357, cardmhz=357)
2019/11/10 15:55:24 06D8CF83 r (reader) HD+ [mouse] card detected
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] Setting baudrate to 111600 bps
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] detected nagra merlin card in CAK7 mode
2019/11/10 15:55:26 06D8CF83 r (reader) HD+ [mouse] Rom revision: DNASP420 RevS60
2019/11/10 15:55:30 06D8CF83 r (reader) HD+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2019/11/10 15:55:33 06D8CF83 r (reader) HD+ [mouse] T1 Resync command error, trying to reactivate!
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] Setting baudrate to 111600 bps
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] detected nagra merlin card in CAK7 mode
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] ready for requests
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] found card system nagra merlin
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] ROM: D N A S P 4 2 0
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] REV: R e v S 6 0
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] SER: ############
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] CAID: 0000
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] Prv.ID: FF FF FF FF (sysid)
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] -----------------------------------------
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] |id |tier |valid from |valid to |
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] +----+--------+------------+------------+
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] -----------------------------------------
2019/11/10 15:55:35 00000000 s (main) init for all local cards done
2019/11/10 15:55:35 00000000 s (emmcache) loaded 6 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2019/11/10 15:55:35 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2019/11/10 15:55:35 0F9E7DF8 c (client) plain dvbapi-client granted (localhost, au=on (1 reader))
2019/11/10 15:59:07 3B5C5A75 r (reader) HD+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2019/11/10 15:59:10 3B5C5A75 r (reader) HD+ [mouse] T1 Resync command error, trying to reactivate!
>> OSCam << cardserver log switched at Sun Nov 10 15:55:23 2019
-------------------------------------------------------------------------------
2019/11/10 15:55:23 00000000 s >> OSCam << cardserver log switched, version 1.20_svn, build r11517 (arm-linux-gnueabihf-ssl)
2019/11/10 15:55:23 00000000 s (main) System name = Linux
2019/11/10 15:55:23 00000000 s (main) Host name = oscam
2019/11/10 15:55:23 00000000 s (main) Release = 4.14.98-v7+
2019/11/10 15:55:23 00000000 s (main) Version = #1200 SMP Tue Feb 12 20:27:48 GMT 2019
2019/11/10 15:55:23 00000000 s (main) Machine = armv7l
2019/11/10 15:55:23 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 14593
2019/11/10 15:55:23 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2019/11/10 15:55:23 00000000 s (main) signal handling initialized
2019/11/10 15:55:23 00000000 s (net) monitor: initialized (fd=5, port=988)
2019/11/10 15:55:23 00000000 s (net) cs357x: initialized (fd=6, port=20197)
2019/11/10 15:55:23 00000000 s (net) cs378x: initialized (fd=7, port=30001)
2019/11/10 15:55:23 00000000 s (net) newcamd: initialized (fd=8, port=10009)
2019/11/10 15:55:23 00000000 s (net) -> CAID: 186A PROVID: 000000
2019/11/10 15:55:23 00000000 s (net) cccam: initialized (fd=9, port=30000)
2019/11/10 15:55:23 00000000 s (reader) HD+ [mouse] creating thread for device /dev/ttyUSB_oscamReader
2019/11/10 15:55:23 00000000 s (main) waiting for local card init
2019/11/10 15:55:23 44DE7FC2 h (webif) webif: decompressed 170988 bytes back into 410428 bytes
2019/11/10 15:55:23 44DE7FC2 h (webif) HTTP Server running. ip=0.0.0.0 port=8081
2019/11/10 15:55:23 06D8CF83 r (reader) HD+ [mouse] Reader initialized (device=/dev/ttyUSB_oscamReader, detect=cd, mhz=357, cardmhz=357)
2019/11/10 15:55:24 06D8CF83 r (reader) HD+ [mouse] card detected
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] Setting baudrate to 111600 bps
2019/11/10 15:55:25 06D8CF83 r (reader) HD+ [mouse] detected nagra merlin card in CAK7 mode
2019/11/10 15:55:26 06D8CF83 r (reader) HD+ [mouse] Rom revision: DNASP420 RevS60
2019/11/10 15:55:30 06D8CF83 r (reader) HD+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2019/11/10 15:55:33 06D8CF83 r (reader) HD+ [mouse] T1 Resync command error, trying to reactivate!
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 57 00 44 4E 41 53 50 34 32 30 20 52 65 76 53 36 30 17
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] Setting baudrate to 111600 bps
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] detected nagra merlin card in CAK7 mode
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] ready for requests
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [mouse] found card system nagra merlin
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] ROM: D N A S P 4 2 0
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] REV: R e v S 6 0
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] SER: ############
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] CAID: 0000
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] Prv.ID: FF FF FF FF (sysid)
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] -----------------------------------------
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] |id |tier |valid from |valid to |
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] +----+--------+------------+------------+
2019/11/10 15:55:35 06D8CF83 r (reader) HD+ [nagra merlin] -----------------------------------------
2019/11/10 15:55:35 00000000 s (main) init for all local cards done
2019/11/10 15:55:35 00000000 s (emmcache) loaded 6 emmcache records from /usr/local/etc/oscam.emmcache in 0 ms
2019/11/10 15:55:35 00000000 s (emmcache) loaded 0 emmstat records from /usr/local/etc/oscam.emmstat in 0 ms
2019/11/10 15:55:35 0F9E7DF8 c (client) plain dvbapi-client granted (localhost, au=on (1 reader))
2019/11/10 15:59:07 3B5C5A75 r (reader) HD+ [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2019/11/10 15:59:10 3B5C5A75 r (reader) HD+ [mouse] T1 Resync command error, trying to reactivate!
Hat von euch jemand eine Idee, wo mein Fehler liegt? Ich finde es einfach nicht...
Vielen Dank schon vorab!
Viele Grüße
Steff