G09 wird in Easymouse2 nicht erkannt - System Raspberry Pi

[siciliano76]

Moin,

nachdem meine mouse-funktion wieder geht und der Cardreader angesprochen wird kann ich die G09 nicht vernünftig einlesen die Config sollte richtig sein.

Mit dem Smartreader+ gabs hingegen keine probleme, aber da steckt nun meine Canal Digitaal drin.

WebIf Log:

Spoiler

• 2015/10/21 19:21:14 186A56F9 h (reader) KD_G09 [mouse] Restarting reader
• 2015/10/21 19:21:14 186A56F9 h (reader) KD_G09 [mouse] creating thread for device /dev/ttyUSB0
• 2015/10/21 19:21:14 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 0 bytes total time_us 75547
• 2015/10/21 19:21:14 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 0 bytes total time_us 75506
• 2015/10/21 19:21:14 2C05D8A8 r (reader) KD_G09 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=534, cardmhz=357)
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] card detected
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 0 bytes total time_us 75542
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value fe time_us 1292
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 2 value fe time_us 258
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 3 value fc time_us 90
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 3 bytes total time_us 78881
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value fc time_us 1335
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 1 bytes total time_us 77331
• 2015/10/21 19:21:28 2C05D8A8 r (reader) KD_G09 [mouse] Error activating card.
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 0 bytes total time_us 75537
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value fe time_us 1370
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 2 value fe time_us 137
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 3 value fc time_us 303
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 3 bytes total time_us 78761
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value 72 time_us 345
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 2 value fe time_us 887
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 3 value fe time_us 79
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 4 value fc time_us 115
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 4 bytes total time_us 79050
• 2015/10/21 19:21:29 2C05D8A8 r (reader) KD_G09 [mouse] Error activating card.
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 0 bytes total time_us 75605
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value fe time_us 1317
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 2 value fe time_us 86
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 3 value fc time_us 91
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 3 bytes total time_us 79421
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 1 value fe time_us 1117
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 2 value fe time_us 81
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Flush readed byte Nr 3 value fc time_us 476
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Buffers readed 3 bytes total time_us 78606
• 2015/10/21 19:21:30 2C05D8A8 r (reader) KD_G09 [mouse] Error activating card.
• 2015/10/21 19:21:31 2C05D8A8 r (reader) KD_G09 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2015/10/21 19:21:31 2C05D8A8 r (reader) KD_G09 [mouse] card initializing error

Oscam.Server

Spoiler

[reader]
label = KD_G09
protocol = mouse
device = /dev/ttyUSB0
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 534
group = 1
emmcache = 1,3,2,0
ndsversion = 2

Einstellung Dipschalter Easymouse2:

3,3V - Phoenix - 3,579Mhz - 6Mhz


Die Easymouse und der Smargo hängen beide am Aktiven USB-Hub.

Grüße Siciliano76

 

[Hunchback1000]

AW: G09 wird in Easymouse2 nicht erkannt - System Raspberry Pi

5V, PHOENIX, HOCH, 6 MHz

und

[reader]
label = KD_G09
protocol = mouse
device = /dev/ttyUSB0
caid = 09C7
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 600
group = 1
emmcache = 1,3,2,0

MfG

 

[siciliano76]

AW: G09 wird in Easymouse2 nicht erkannt - System Raspberry Pi

Super Danke das war es.

Aber dann frag ich mich wieso die Einstellungen falsch waren, wenn diese in anderen Beschreibungen genau diese vorherige Einstellung falsch sind, z.B. in

Sie müssen registriert sein, um Links zu sehen.

oder habe ich da irgendwas übersehen?


...und gilt die neue Einstellung auch für die V14?? Bevor ich mich wieder irgendwo verlese?

Grüße

Sici76