Hab eine Dreambox 7000s mit gemini4.5(USB) die gbox läuft 2.1b
Meine Problem hab eine viacces karte die nicht von der Dream gelesen wird ich denke sicherlich das ich was in gbox.cfg verändern muss habe schon bissle in gbox.cfg rumgespielt aber leider ohne erfolg.
Deshalb post ich mal meine gbox.cfg hier .... vielleicht kann mir ja jemand weiterhelfen
# gbox config file
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 02 }
# Display EMM messages on Konsole
# 00 don't show any EMM's
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 02 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.3 dreambox
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.3 8017
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.1.3 8024
# Used Adapter and Port
# xx=adapter nr (0,1,2,3...)
# yy=comport to use (0=none,1=com1,2=com2, ...)
V: { f0 30 }
# Option for VDR (Linux X86) only
# xx yy ; xx = dvb-s Card nummber
# xx yy ; yy = comport to use by that card
V: { f0 30 }
#W: { 1C }
Meine Problem hab eine viacces karte die nicht von der Dream gelesen wird ich denke sicherlich das ich was in gbox.cfg verändern muss habe schon bissle in gbox.cfg rumgespielt aber leider ohne erfolg.
Deshalb post ich mal meine gbox.cfg hier .... vielleicht kann mir ja jemand weiterhelfen
# gbox config file
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 02 }
# Display EMM messages on Konsole
# 00 don't show any EMM's
# 01 show only valid EMM's
# 02 show valid and bad EMM's with complete data display
M: { 02 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 01 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.1.3 dreambox
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.3 8017
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.1.3 8024
# Used Adapter and Port
# xx=adapter nr (0,1,2,3...)
# yy=comport to use (0=none,1=com1,2=com2, ...)
V: { f0 30 }
# Option for VDR (Linux X86) only
# xx yy ; xx = dvb-s Card nummber
# xx yy ; yy = comport to use by that card
V: { f0 30 }
#W: { 1C }
