DEBox II hängt im starting loop

[motu]

Hallo ich habe heute meine DEBox II vom Forensponsor bekomme und wollte gleich das Link ist nicht mehr aktiv. image installieren.

ich habe mit vu-util_v2.0.1 probiert es zu flaschen, er ist bis zum entpacken des Images gekommen 20% danach stand HW error im Display.

Dann habe ich gelesen das es über USB geflasht wird. Ich habe dann ein VTi 6.0.3 per USB geflasht was auch erfolgreich war, aber nach dem reboot kommt kurz der VTi Startbildschirm dann schwarz. Im Display steht Starting nach ca 5 min resetet die Box und das Spiel beginnt von vorne.

ich habe auch ein VTI 6.0.0 probiert da ist das gleiche.

ich habe das zur DUO gefunden

Switch the box off, on the rear side.
choose in putty for serial connect, speed must be set to 115200 and choose you`re comport.
Put the box on, when you`re connection is oke, you wil see some text scrolling over the putty screen.
Now use the ctrl + c key to stop the booting.
copy the following line in the screen:

boot -z -elf flash0.kernel: 'rootfstype=jffs2 root=/dev/mtdblock0 rw mem=0x8000000 bcmrac=3`

The box now reboot from the flash, so watch you`re box.
Then open telnet with dcc and put in the following line.

flash_eraseall /dev/mtd5

and after that the following line

reboot -f

Then you`re box is running again.

aber beiner DEBOX kommt da nix. hat die DEBOX eine andere Baudrate?

Was kann ich jetzt noch probieren ? oder was habe ich falsch gemacht?

Gruß Micha

hat keiner eine Idee?

ich habe heute eine Serielle Verbindung auf Arbeit hin bekommen. hier ist der Startprozess .

Spoiler

BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42 2012 Vuplus team
Copyright (C) Broadcom Corporation.

CPU speed: 1305MHz
Total memory(0): 1024MB
DDR Freq: 800 MHz
DDR Mode: DDR3
DEV TECH: 2048MBIT
DDR Width: 32
Boot Device: NAND
Total flash: 256MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....

CFE initialized.
waiting for usb...done
checking usb
No Priority Usb
checking front key
readFrontKey 0 0
Checking usbdisk0:/vuplus/solo2/ignore.update......NO
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......NO
....NO
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......NO
Starting splash screen.
Found splash image - Width = 720 Height = 480
Non Interlaced Replace list 009f8100 0c800000Interlaced Replace list 009f86a0 0c
8005a0
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubiroot rootflags=sync bm
em=192M@64M bmem=256M@512M
Loading: 0x80001000/6796800 0x8067c600/114912 Entry address is 0x80502f10
Starting program at 0x80502f10

Linux version 3.3.8-2.0 (vti@build-vti) (gcc version 4.6.4 20120303 (prerelease)
(GCC) ) #1 SMP Sun Jun 30 20:58:19 CEST 2013
Fetching vars from bootloader... found 16 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 1024 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 30000000 @ 20000000 (usable)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Zone PFN ranges:
Normal 0x00000000 -> 0x00050000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000000 -> 0x00010000
0: 0x00020000 -> 0x00050000
PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd
=rootfs rootfstype=ubifs root=ubi0:rootfs
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
Memory: 571940k/1048576k available (5221k kernel code, 476636k reserved, 1233k d
ata, 184k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 1305 MHz (163.126 MHz counter)
Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
USB1: power enable is active high; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource wktmr
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 1117
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] enabled, bootconsole disabled 65) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mod
e
ahci strict-ahci.0: flags: ncq sntf stag clo slum part
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
brcmstb_nand: NAND controller driver is loaded
Found PHY at Address 3
Config GPHY through MDIO
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
No PHY detected, not registering interface:1
bcmgenet: probe of bcmgenet.1 failed with error -5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ata2.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
sda: unknown partition table
sd 1:0:0:0: [sda] Attached SCSI disk
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
3151d14aa6e983aa36d51a80d0477859f9ba12af [media] media: remove __dev* an
notations
978ae2247fac3b330ecd1095823001d2c08c7efd [media] extract_xc3028.pl: fix
permissions
73ec66c000e9816806c7380ca3420f4e0638c40e [media] stv0900: Multistream su
pport
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi
t)
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha
mming ECC
Bad block table found at page 131008, version 0x0E
Bad block table found at page 130944, version 0x0E
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000004e00000
nand_read_bbt: bad block at 0x000006700000
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007940000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x000008240000
nand_read_bbt: bad block at 0x000008c40000
nand_read_bbt: bad block at 0x000009160000
nand_read_bbt: bad block at 0x000009bc0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000d940000
nand_read_bbt: bad block at 0x00000dbc0000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e4e0000
nand_read_bbt: bad block at 0x00000e9c0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 20
UBI: attached mtd0 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 225 MiB
UBI: number of good PEBs: 1778
UBI: number of bad PEBs: 22
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 1778
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 256/19
UBI: image sequence number: 187266110
UBI: background thread "ubi_bgt0d" started, PID 44

UBIFS: parse sync
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 221700096 bytes (216504 KiB, 211 MiB, 1746 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 184k freed
INIT: version 2.88 booting
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo2)
bcm7356: hotplug_callback():
Hotplug - status.connected 0:0
[GP]:brcm_pwm_init

CPU 1 Unable to handle kernel paging request at virtual address e0d97ea8, epc ==
e0d97ea8, ra == e0d97ea8
CPU 0 Unable to handle kernel paging request at virtual address e165bb1c, epc ==
e0e52c54, ra == e0e52bac
Oops[#1]:
Cpu 0
$ 0 : 00000000 10108300 e165bb1c 00000001
$ 4 : cd3b9000 8060bbd0 e16496b0 e0dbb1e0
$ 8 : 00000000 00000000 e17a5708 000000ff
$12 : 0006a2f1 ffffffff 8068a240 035178c5
$16 : cd3d2000 00000002 cd3d1e80 8060bbf8
$20 : cd3d1b80 00000000 00000000 00000002
$24 : 00000000 00000000
$28 : 8060a000 8060bbe8 e165bb1c e0e52bac
Hi : 00000000
Lo : 0862a4fa
epc : e0e52c54 0xe0e52c54
Tainted: P O
ra : e0e52bac 0xe0e52bac
Status: 10108303 KERNEL EXL IE
Cause : 00800408
BadVA : e165bb1c
PrId : 00025a11 (Brcm4380)
Modules linked in: procmk(O)
Process swapper/0 (pid: 0, threadinfo=8060a000, task=80618e80, tls=00000000)
Stack : 000f4240 80003418 00000004 00000004 81a09e01 89733180 89733180 e7033180
81a09e80 00000001 80617a54 80057264 00000001 00000000 cd3d3480 00603000
00000000 cf062400 cc7eba00 40000000 ffffffe0 00000000 ffffffff e0dbb418
8067e324 00000000 80617a54 80003418 e0dba7fc e0db81c0 e0db942c cd3d5400
00000041 00000f41 00000001 00000020 00000060 e17a56d0 8060bca8 e17a56d0
...
Call Trace:
[<80003418>] wktmr_cs_read+0x18/0x6c
[<80057264>] enqueue_task_fair+0x110/0x1d0
[<80003418>] wktmr_cs_read+0x18/0x6c
[<80518d30>] _raw_spin_unlock_irqrestore+0x0/0x24
[<800789fc>] __disable_irq_nosync+0x4c/0x68
[<8002a744>] tasklet_hi_action+0x13c/0x2b0
[<800772d0>] handle_irq_event_percpu+0xd4/0x248
[<8002b0f4>] __do_softirq+0x104/0x1bc
[<80077494>] handle_irq_event+0x50/0x8c
[<8007f378>] rcu_irq_enter+0x98/0xf0
[<8002b454>] do_softirq+0x64/0x78
[<80005e54>] do_IRQ+0x18/0x24
[<8002b73c>] irq_exit+0xac/0xd4
[<80003048>] brcm_intc_dispatch.isra.0+0x90/0x220
[<80005e54>] do_IRQ+0x18/0x24
[<8002b73c>] irq_exit+0xac/0xd4
[<800032a4>] plat_irq_dispatch+0xcc/0x10c
[<80004144>] ret_from_irq+0x0/0x4
[<8004a0b0>] hrtimer_start+0x20/0x2c
[<80004360>] r4k_wait+0x0/0x40
[<8005d1e0>] dequeue_task_stop+0x0/0x10
[<80006190>] cpu_idle+0x98/0xf0
[<80004380>] r4k_wait+0x20/0x40
[<80503044>] rest_init+0x6c/0x78
[<8064f8b0>] start_kernel+0x35c/0x37c
[<8066ddbc>] _einittext+0x0/0x0
[<8064f0dc>] unknown_bootoption+0x0/0x2a4
[<8066ddbc>] _einittext+0x0/0x0
[<80502f2c>] kernel_entry+0x1c/0xc8


Code: 1060ffe8 00021080 03c21021 <8c420000> 00400008 00000000 08394afc 2402
0006 08394afc
---[ end trace 8c00d84b3849c8db ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..

 

[dirkjan73]

AW: DEBox II hängt im starting loop

ich habe heute eine Serielle Verbindung auf Arbeit hin bekommen. hier ist der Startprozess .

Spoiler

BCM7356B2 CFE Build Date: Fri Nov 23 11:23:42 2012 Vuplus team
Copyright (C) Broadcom Corporation.

CPU speed: 1305MHz
Total memory(0): 1024MB
DDR Freq: 800 MHz
DDR Mode: DDR3
DEV TECH: 2048MBIT
DDR Width: 32
Boot Device: NAND
Total flash: 256MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Root Hub
Saving shmoo values...
Saved shmoo values....

CFE initialized.
waiting for usb...done
checking usb
No Priority Usb
checking front key
readFrontKey 0 0
Checking usbdisk0:/vuplus/solo2/ignore.update......NO
Checking usbdisk0:/vuplus/solo2/force.update......NO
Checking usbdisk0:/vuplus/solo2/cfe_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/root_cfe_auto.bin......NO
....NO
Checking usbdisk0:/vuplus/solo2/splash_cfe_auto.bin......NO
Checking usbdisk0:/vuplus/solo2/kernel_cfe_auto.bin......NO
Starting splash screen.
Found splash image - Width = 720 Height = 480
Non Interlaced Replace list 009f8100 0c800000Interlaced Replace list 009f86a0 0c
8005a0
Loader:elf Filesys:raw Dev:flash0.kernel File: Options:ubiroot rootflags=sync bm
em=192M@64M bmem=256M@512M
Loading: 0x80001000/6796800 0x8067c600/114912 Entry address is 0x80502f10
Starting program at 0x80502f10

Linux version 3.3.8-2.0 (vti@build-vti) (gcc version 4.6.4 20120303 (prerelease)
(GCC) ) #1 SMP Sun Jun 30 20:58:19 CEST 2013
Fetching vars from bootloader... found 16 vars.
Options: moca=0 sata=1 pcie=0 usb=1
Using 1024 MB + 0 MB RAM (from CFE)
bootconsole [early0] enabled
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Determined physical RAM map:
memory: 10000000 @ 00000000 (usable)
memory: 30000000 @ 20000000 (usable)
bmem: adding 192 MB RESERVED region at 64 MB (0x0c000000@0x04000000)
bmem: adding 256 MB RESERVED region at 512 MB (0x10000000@0x20000000)
Zone PFN ranges:
Normal 0x00000000 -> 0x00050000
Movable zone start PFN for each node
Early memory PFN ranges
0: 0x00000000 -> 0x00010000
0: 0x00020000 -> 0x00050000
PERCPU: Embedded 7 pages/cpu @81a09000 s5632 r8192 d14848 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259584
Kernel command line: ubiroot rootflags=sync bmem=192M@64M bmem=256M@512M ubi.mtd
=rootfs rootfstype=ubifs root=ubi0:rootfs
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
Memory: 571940k/1048576k available (5221k kernel code, 476636k reserved, 1233k d
ata, 184k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:160
Measuring MIPS counter frequency...
Detected MIPS clock frequency: 1305 MHz (163.126 MHz counter)
Calibrating delay loop... 869.37 BogoMIPS (lpj=434688)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
SMP: Booting CPU1...
CPU revision is: 00025a11 (Brcm4380)
FPU revision is: 00130001
Primary instruction cache 32kB, physically tagged, 4-way, linesize 64 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
MIPS secondary cache 256kB, 8-way, linesize 128 bytes.
SMP: CPU1 is running
Brought up 2 CPUs
devtmpfs: initialized
NET: Registered protocol family 16
USB0: power enable is active high; overcurrent is active low
USB1: power enable is active high; overcurrent is active low
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource wktmr
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NTFS driver 2.1.30 [Flags: R/W].
msgmni has been set to 1117
io scheduler noop registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] enabled, bootconsole disabled 65) is a 16550A
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x10406940 (irq = 66) is a 16550A
serial8250.0: ttyS2 at MMIO 0x10406980 (irq = 67) is a 16550A
loop: module loaded
ahci: SSS flag set, parallel bus scan disabled
ahci strict-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mod
e
ahci strict-ahci.0: flags: ncq sntf stag clo slum part
scsi0 : ahci_platform
scsi1 : ahci_platform
ata1: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x100 irq 41
ata2: SATA max UDMA/133 mmio [mem 0x10181000-0x10190fff] port 0x180 irq 41
brcmstb_nand: NAND controller driver is loaded
Found PHY at Address 3
Config GPHY through MDIO
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
No PHY detected, not registering interface:1
bcmgenet: probe of bcmgenet.1 failed with error -5
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-brcm ehci-brcm.0: Broadcom STB EHCI
ehci-brcm ehci-brcm.0: new USB bus registered, assigned bus number 1
ehci-brcm ehci-brcm.0: irq 69, io mem 0x10480300
ehci-brcm ehci-brcm.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci-brcm ehci-brcm.1: Broadcom STB EHCI
ehci-brcm ehci-brcm.1: new USB bus registered, assigned bus number 2
ata2.00: ATA-8: WDC WD2500BEVT-22A23T0, 01.01A01, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD2500BEVT-2 01.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
sda: unknown partition table
sd 1:0:0:0: [sda] Attached SCSI disk
ehci-brcm ehci-brcm.1: irq 70, io mem 0x10480500
ehci-brcm ehci-brcm.1: USB 0.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-brcm ehci-brcm.2: Broadcom STB EHCI
ehci-brcm ehci-brcm.2: new USB bus registered, assigned bus number 3
ehci-brcm ehci-brcm.2: irq 74, io mem 0x10490300
ehci-brcm ehci-brcm.2: USB 0.0 started, EHCI 1.00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
ehci-brcm ehci-brcm.3: Broadcom STB EHCI
ehci-brcm ehci-brcm.3: new USB bus registered, assigned bus number 4
ehci-brcm ehci-brcm.3: irq 75, io mem 0x10490500
ehci-brcm ehci-brcm.3: USB 0.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-brcm ohci-brcm.0: Broadcom STB OHCI
ohci-brcm ohci-brcm.0: new USB bus registered, assigned bus number 5
ohci-brcm ohci-brcm.0: irq 71, io mem 0x10480400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 1 port detected
ohci-brcm ohci-brcm.1: Broadcom STB OHCI
ohci-brcm ohci-brcm.1: new USB bus registered, assigned bus number 6
ohci-brcm ohci-brcm.1: irq 72, io mem 0x10480600
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 1 port detected
ohci-brcm ohci-brcm.2: Broadcom STB OHCI
ohci-brcm ohci-brcm.2: new USB bus registered, assigned bus number 7
ohci-brcm ohci-brcm.2: irq 76, io mem 0x10490400
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 1 port detected
ohci-brcm ohci-brcm.3: Broadcom STB OHCI
ohci-brcm ohci-brcm.3: new USB bus registered, assigned bus number 8
ohci-brcm ohci-brcm.3: irq 77, io mem 0x10490600
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
mousedev: PS/2 mouse device common for all mice
i2c /dev entries driver
WARNING: You are using an experimental version of the media stack.
As the driver is backported to an older kernel, it doesn't offer
enough quality for its usage in production.
Use it with care.
Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
3151d14aa6e983aa36d51a80d0477859f9ba12af [media] media: remove __dev* an
notations
978ae2247fac3b330ecd1095823001d2c08c7efd [media] extract_xc3028.pl: fix
permissions
73ec66c000e9816806c7380ca3420f4e0638c40e [media] stv0900: Multistream su
pport
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
IR RC5 (streamzap) protocol handler initialized
IR SANYO protocol handler initialized
IR MCE Keyboard/mouse protocol handler initialized
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
PM: CP0 COUNT/COMPARE frequency does not depend on divisor
EBI CS0: setting up NAND flash (primary)
NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi
t)
brcmnand brcmnand.0: 256MiB total, 128KiB blocks, 2KiB pages, 16B OOB, 8-bit, Ha
mming ECC
Bad block table found at page 131008, version 0x0E
Bad block table found at page 130944, version 0x0E
nand_read_bbt: bad block at 0x000000700000
nand_read_bbt: bad block at 0x000001aa0000
nand_read_bbt: bad block at 0x0000030c0000
nand_read_bbt: bad block at 0x000004e00000
nand_read_bbt: bad block at 0x000006700000
nand_read_bbt: bad block at 0x000006b40000
nand_read_bbt: bad block at 0x000007940000
nand_read_bbt: bad block at 0x000007fe0000
nand_read_bbt: bad block at 0x000008240000
nand_read_bbt: bad block at 0x000008c40000
nand_read_bbt: bad block at 0x000009160000
nand_read_bbt: bad block at 0x000009bc0000
nand_read_bbt: bad block at 0x00000a780000
nand_read_bbt: bad block at 0x00000bfa0000
nand_read_bbt: bad block at 0x00000c260000
nand_read_bbt: bad block at 0x00000d940000
nand_read_bbt: bad block at 0x00000dbc0000
nand_read_bbt: bad block at 0x00000de80000
nand_read_bbt: bad block at 0x00000e4e0000
nand_read_bbt: bad block at 0x00000e9c0000
Creating 4 MTD partitions on "brcmnand.0":
0x000001f00000-0x000010000000 : "rootfs"
0x000001f00000-0x000010000000 : "rootfs(redundant)"
0x000000200000-0x000000900000 : "kernel"
0x000000900000-0x000000a00000 : "mac"
UBI: attaching mtd0 to ubi0
UBI: physical eraseblock size: 131072 bytes (128 KiB)
UBI: logical eraseblock size: 126976 bytes
UBI: smallest flash I/O unit: 2048
UBI: VID header offset: 2048 (aligned 2048)
UBI: data offset: 4096
UBI: max. sequence number: 20
UBI: attached mtd0 to ubi0
UBI: MTD device name: "rootfs"
UBI: MTD device size: 225 MiB
UBI: number of good PEBs: 1778
UBI: number of bad PEBs: 22
UBI: number of corrupted PEBs: 0
UBI: max. allowed volumes: 128
UBI: wear-leveling threshold: 4096
UBI: number of internal volumes: 1
UBI: number of user volumes: 1
UBI: available PEBs: 0
UBI: total number of reserved PEBs: 1778
UBI: number of PEBs reserved for bad PEB handling: 17
UBI: max/mean erase counter: 256/19
UBI: image sequence number: 187266110
UBI: background thread "ubi_bgt0d" started, PID 44

UBIFS: parse sync
UBIFS: recovery needed
UBIFS: recovery completed
UBIFS: mounted UBI device 0, volume 0, name "rootfs"
UBIFS: file system size: 221700096 bytes (216504 KiB, 211 MiB, 1746 LEBs)
UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
UBIFS: media format: w4/r0 (latest is w4/r0)
UBIFS: default compressor: lzo
UBIFS: reserved for root: 0 bytes (0 KiB)
VFS: Mounted root (ubifs filesystem) on device 0:14.
devtmpfs: mounted
Freeing unused kernel memory: 184k freed
INIT: version 2.88 booting
procmk_init
dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
DVB: registering new adapter (vusolo2)
bcm7356: hotplug_callback():
Hotplug - status.connected 0:0
[GP]:brcm_pwm_init

CPU 1 Unable to handle kernel paging request at virtual address e0d97ea8, epc ==
e0d97ea8, ra == e0d97ea8
CPU 0 Unable to handle kernel paging request at virtual address e165bb1c, epc ==
e0e52c54, ra == e0e52bac
Oops[#1]:
Cpu 0
$ 0 : 00000000 10108300 e165bb1c 00000001
$ 4 : cd3b9000 8060bbd0 e16496b0 e0dbb1e0
$ 8 : 00000000 00000000 e17a5708 000000ff
$12 : 0006a2f1 ffffffff 8068a240 035178c5
$16 : cd3d2000 00000002 cd3d1e80 8060bbf8
$20 : cd3d1b80 00000000 00000000 00000002
$24 : 00000000 00000000
$28 : 8060a000 8060bbe8 e165bb1c e0e52bac
Hi : 00000000
Lo : 0862a4fa
epc : e0e52c54 0xe0e52c54
Tainted: P O
ra : e0e52bac 0xe0e52bac
Status: 10108303 KERNEL EXL IE
Cause : 00800408
BadVA : e165bb1c
PrId : 00025a11 (Brcm4380)
Modules linked in: procmk(O)
Process swapper/0 (pid: 0, threadinfo=8060a000, task=80618e80, tls=00000000)
Stack : 000f4240 80003418 00000004 00000004 81a09e01 89733180 89733180 e7033180
81a09e80 00000001 80617a54 80057264 00000001 00000000 cd3d3480 00603000
00000000 cf062400 cc7eba00 40000000 ffffffe0 00000000 ffffffff e0dbb418
8067e324 00000000 80617a54 80003418 e0dba7fc e0db81c0 e0db942c cd3d5400
00000041 00000f41 00000001 00000020 00000060 e17a56d0 8060bca8 e17a56d0
...
Call Trace:
[<80003418>] wktmr_cs_read+0x18/0x6c
[<80057264>] enqueue_task_fair+0x110/0x1d0
[<80003418>] wktmr_cs_read+0x18/0x6c
[<80518d30>] _raw_spin_unlock_irqrestore+0x0/0x24
[<800789fc>] __disable_irq_nosync+0x4c/0x68
[<8002a744>] tasklet_hi_action+0x13c/0x2b0
[<800772d0>] handle_irq_event_percpu+0xd4/0x248
[<8002b0f4>] __do_softirq+0x104/0x1bc
[<80077494>] handle_irq_event+0x50/0x8c
[<8007f378>] rcu_irq_enter+0x98/0xf0
[<8002b454>] do_softirq+0x64/0x78
[<80005e54>] do_IRQ+0x18/0x24
[<8002b73c>] irq_exit+0xac/0xd4
[<80003048>] brcm_intc_dispatch.isra.0+0x90/0x220
[<80005e54>] do_IRQ+0x18/0x24
[<8002b73c>] irq_exit+0xac/0xd4
[<800032a4>] plat_irq_dispatch+0xcc/0x10c
[<80004144>] ret_from_irq+0x0/0x4
[<8004a0b0>] hrtimer_start+0x20/0x2c
[<80004360>] r4k_wait+0x0/0x40
[<8005d1e0>] dequeue_task_stop+0x0/0x10
[<80006190>] cpu_idle+0x98/0xf0
[<80004380>] r4k_wait+0x20/0x40
[<80503044>] rest_init+0x6c/0x78
[<8064f8b0>] start_kernel+0x35c/0x37c
[<8066ddbc>] _einittext+0x0/0x0
[<8064f0dc>] unknown_bootoption+0x0/0x2a4
[<8066ddbc>] _einittext+0x0/0x0
[<80502f2c>] kernel_entry+0x1c/0xc8


Code: 1060ffe8 00021080 03c21021 <8c420000> 00400008 00000000 08394afc 2402
0006 08394afc
---[ end trace 8c00d84b3849c8db ]---
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 180 seconds..

Kanst du bitte sagen welchem tools und programme du gebraucht habst?

 

[einsmann]

AW: DEBox II hängt im starting loop

in den richtigen Bereich verschoben

Gruß

 

[motu]

AW: DEBox II hängt im starting loop

für was ? zum Image programmieren habe ich vu-util_v2.0.1 benutzt .

bei mir hat der Flasch einige def Sektoren und scheint deshalb im startloop zu hängen.
Die Box ist zurück zum Sponsor