Dbox2 Oscam AU

[Rehlein70]

hallo leute
ich habe eine dbox2 kabel mit keywelt Image D02 karte und oscam 1.2... box laüft so weit, meine
frage ist ob die karte jetzt au macht? was mir sorgen macht ist das in webif unter Status CARDOK

Sie müssen registriert sein, um Links zu sehen.

steht.
ich stellemal meine conf. rein vielleich könnt ihr mir helfen

oscam.conf

Spoiler

[monitor]
Port = 988
NoCrypt = 127.0.0.1
NoCrypt = 192.168.2.1-192.168.2.255
AULow = 120
HideClient_TO = 5
MonLevel = 1
#




[cccam]
port = 12000
Reshare = 1
Ignorereshare = 0
Version = 2.1.1
Stealth = 0

[dvbapi]
enabled = 1
pmt_mode = 0
boxtype = dbox2
user = dvbapi
au = 1


[webif]
httpport = 83
httpuser = admin
httppwd = passwd
httprefresh = 10
httpallowed = 192.168.2.1-192.168.255.255
httpreadonly = 1
httphideidleclients = 1
httpreadonly = 1

oscam.Server

Spoiler

# multicam
[reader]
Label = D02Card
Protocol = mouse
Device = /dev/tts/1
Group = 1
mhz = 600
cardmhz = 600
EMMCache = 1,1,2
CAID = 1722,1834

 

[sammy909]

AW: Dbox2 Oscam AU

Hi, guck mal im webif von Oscam unter readers.

 

[Rehlein70]

AW: Dbox2 Oscam AU

was soll ich da sehen oder finden?

[TABLE="class: readers"]
[TR]
[TH]Enabled[/TH]
[TH]Reader[/TH]
[TH]Protocol[/TH]
[TH]EMM error
UK / G / S / UQ [/TH]
[TH]EMM written
UK / G / S / UQ [/TH]
[TH]EMM skipped
UK / G / S / UQ [/TH]
[TH]EMM blocked
UK / G / S / UQ [/TH]
[TH]ECMs OK[/TH]
[TH]ECMs NOK[/TH]
[TH]ECMs Filtered
Head / Len [/TH]
[TH]LB Weight[/TH]
[TH="colspan: 6"]Action[/TH]
[/TR]
[TR="class: enabledreader"]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD]D02Card[/TD]
[TD]db2com[/TD]
[TD="class: centered"]0 / 0 / 0 / 0[/TD]
[TD="class: centered"]0 / 3 / 38 / 0[/TD]
[TD="class: centered"]0 / 89 / 0 / 0[/TD]
[TD="class: centered"]0 / 0 / 0 / 0[/TD]
[TD="class: centered"]257 (100.00%)[/TD]
[TD="class: centered"]0 (0.00%)[/TD]
[TD="class: centered"]0 / 0 [/TD]
[TD="class: centered"]100[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[TD="class: centered"]

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD] [/TD]
[TD="class: centered, colspan: 2"]New Reader[/TD]
[TD="class: centered, colspan: 2"]Label: [/TD]
[TD="class: centered, colspan: 2"]Protocol: camd35 cs378x newcamd newcamd524 cccam constcw db2com internal mouse mp35 sc8in1 smargo [/TD]
[TD="class: centered, colspan: 4"][/TD]
[TD="colspan: 6"][/TD]
[/TR]
[/TABLE]

 

[sammy909]

AW: Dbox2 Oscam AU

Au funktioniert , siehe emms written.

 

[Rehlein70]

AW: Dbox2 Oscam AU

das ist super danke, verstehe ich aber nicht kannst du mir das mal kurz erklären?

 

[sammy909]

AW: Dbox2 Oscam AU

Durch die EMM ' s werden sozusagen deine Abo Sender freigeschaltet und verlängert .

 

[Rehlein70]

AW: Dbox2 Oscam AU

super danke dann werde ich mich jetzt mal an meine karte von kabeldeutschland (G09) machen die läuft überhaut nich werde ihr bistimmt nochmal um hilfe bitte

 

[waves]

AW: Dbox2 Oscam AU

Öhem, wenn Du kein Multicam in der DBox hast, oder einen externen Reader, wird das mit der G09 nix.
Die kann die DBox ohne Modifikation (wie schon erwähnt Multicam oder externer Reader) nicht lesen.

 

[Rehlein70]

also milticam ist da ( NG2) Problem ist mit einen alten oscam (1,1)läuft sie so halbwegs mit einen neuen oscam (1.2) überhaupt nicht die karte wird nich erkannt
schaut mal bitte ob ihr denn fehler findet

oscam.conf

Spoiler

[monitor]
Port = 988
NoCrypt = 127.0.0.1
NoCrypt = 192.168.2.1-192.168.2.255
AULow = 120
HideClient_TO = 5
MonLevel = 1
#




[cccam]
port = 12002
Reshare = 1
Ignorereshare = 0
Version = 2.1.1
Stealth = 0

[dvbapi]
enabled = 1
pmt_mode = 0
boxtype = dbox2
user = dvbapi
au = 1


[webif]
httpport = 83
httpuser = admin
httppwd = passwd
httprefresh = 10
httpallowed = 192.168.2.1-192.168.255.255
httpreadonly = 1
httphideidleclients = 1
httpreadonly = 1

oscam.Server

Spoiler

# multicam
[reader]

Label = G02Card
enable = 1
Protocol = mouse
Detect = cd
Device = /dev/tts/1
Group = 1
mhz = 357
cardmhz = 357
EMMCache = 1,3,2
CAID = 09C7
boxid = 12345678
ins7e11 = 15

hier nal mein log

Spoiler

OSCam << cardserver started at Wed Feb 11 18:35:38 2015
-------------------------------------------------------------------------------
2015/02/11 18:35:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8414 (powerpc-linux)
2015/02/11 18:35:38 0 s creating pidfile /var/run/oscam.pid with pid 419
2015/02/11 18:35:39 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/11 18:35:39 0 s userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2015/02/11 18:35:39 0 s signal handling initialized
2015/02/11 18:35:40 0 s 636 service-id's loaded in 686ms
2015/02/11 18:35:40 0 s 3 provid's loaded
2015/02/11 18:35:40 0 s monitor: initialized (fd=6, port=988)
2015/02/11 18:35:40 0 s cccam: initialized (fd=7, port=12002)
2015/02/11 18:35:40 0 s G02Card [mouse] creating thread for device /dev/tts/1
2015/02/11 18:35:40 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/11 18:35:40 0 s waiting for local card init
2015/02/11 18:35:40 1015D588 r G02Card [db2com] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2015/02/11 18:35:40 1014D788 h dvbapi: HTTP Server listening on port 83
2015/02/11 18:35:41 1015D588 r G02Card [db2com] card detected
2015/02/11 18:35:43 1015D588 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 18:35:43 1015D588 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 18:35:43 1015D588 r G02Card [db2com] Setting baudrate to 153600 bps
2015/02/11 18:35:43 1015D588 r G02Card [db2com] WARNING: your card is asking for custom_baudrate = 153600, but your configuration can only deliver custom_baudrate = -2147483648
2015/02/11 18:35:43 1015D588 r G02Card [db2com] You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2015/02/11 18:35:43 1015D588 r G02Card [db2com] You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2015/02/11 18:35:43 1015D588 r G02Card [db2com] Calculated work ETU is 6.51 us
2015/02/11 18:35:43 1015D588 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 18:35:44 1015D588 r G02Card [db2com] card system not supported
2015/02/11 18:35:44 1015D588 r G02Card [db2com] Normal mode failed, reverting to Deprecated Mode
2015/02/11 18:35:45 1015D588 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 18:35:45 1015D588 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 18:35:45 1015D588 r G02Card [db2com] Calculated work ETU is 104.20 us
2015/02/11 18:35:45 1015D588 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 18:35:47 1015D588 r G02Card [db2com] card system not supported
2015/02/11 18:35:47 1015D588 r G02Card [db2com] card initializing error
2015/02/11 18:35:48 0 s init for all local cards done
2015/02/11 18:35:48 10162078 c plain dvbapi-client granted (anonymous, au=off)
2015/02/11 18:35:48 10162078 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2015/02/11 18:35:48 10164BF8 c encrypted cccam-client 95.90.206.103 granted (reneh, au=off)
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: Found 4 ECMpids and 5 STREAMpids in PMT
2015/02/11 18:36:03 10162078 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 18:36:03 10162078 c dvbapi: ERROR: Can't decode channel
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 18:36:03 10162078 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 18:36:03 10162078 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 18:36:03 10162078 c dvbapi: ERROR: Can't decode channel
2015/02/11 18:36:12 10162078 c dvbapi: Stopping demux for pmt file /tmp/pmt.tmp
2015/02/11 18:36:12 10162078 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 18:36:12 10162078 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 18:36:12 10162078 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 18:36:12 10162078 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 18:36:12 10162078 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 18:36:12 10162078 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 18:36:12 10162078 c dvbapi: ERROR: Can't decode channel
2015/02/11 18:36:27 10162078 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1642 PROVID: 000000
2015/02/11 18:36:27 10162078 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C42 PROVID: 000000
2015/02/11 18:36:27 10162078 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D42 PROVID: 000000
2015/02/11 18:36:27 10162078 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1942 PROVID: 000000
2015/02/11 18:36:27 10162078 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 18:36:27 10162078 c dvbapi: New program number: 000A (Sky Cinema) [pmt_list_management 4]
2015/02/11 18:36:27 10162078 c dvbapi: ERROR: Can't decode channel
2015/02/11 18:36:48 0 s G02Card [db2com] Killing reader
2015/02/11 18:36:48 0 s userdb 10 accounts freed
2015/02/11 18:36:48 0 s cardserver down
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Feb 11 18:36:50 2015
-------------------------------------------------------------------------------
2015/02/11 18:36:50 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8414 (powerpc-linux)
2015/02/11 18:36:50 0 s creating pidfile /var/run/oscam.pid with pid 691
2015/02/11 18:36:50 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/11 18:36:50 0 s userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2015/02/11 18:36:50 0 s signal handling initialized
2015/02/11 18:36:50 0 s 636 service-id's loaded in 161ms
2015/02/11 18:36:50 0 s 3 provid's loaded
2015/02/11 18:36:50 0 s monitor: initialized (fd=23, port=988)
2015/02/11 18:36:50 0 s cccam: initialized (fd=24, port=12002)
2015/02/11 18:36:50 1014D8E8 h dvbapi: HTTP Server listening on port 83
2015/02/11 18:36:50 0 s G02Card [mouse] creating thread for device /dev/tts/1
2015/02/11 18:36:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/11 18:36:50 0 s waiting for local card init
2015/02/11 18:36:50 1015D868 r G02Card [db2com] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2015/02/11 18:36:51 1015D868 r G02Card [db2com] card detected
2015/02/11 18:36:52 1015D868 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 18:36:52 1015D868 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 18:36:52 1015D868 r G02Card [db2com] Setting baudrate to 153600 bps
2015/02/11 18:36:52 1015D868 r G02Card [db2com] WARNING: your card is asking for custom_baudrate = 153600, but your configuration can only deliver custom_baudrate = -2147483648
2015/02/11 18:36:52 1015D868 r G02Card [db2com] You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2015/02/11 18:36:52 1015D868 r G02Card [db2com] You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2015/02/11 18:36:52 1015D868 r G02Card [db2com] Calculated work ETU is 6.51 us
2015/02/11 18:36:52 1015D868 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 18:36:53 1015D868 r G02Card [db2com] card system not supported
2015/02/11 18:36:53 1015D868 r G02Card [db2com] Normal mode failed, reverting to Deprecated Mode
2015/02/11 18:36:54 1015D868 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 18:36:54 1015D868 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 18:36:54 1015D868 r G02Card [db2com] Calculated work ETU is 104.20 us
2015/02/11 18:36:54 1015D868 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 18:36:56 1015D868 r G02Card [db2com] card system not supported
2015/02/11 18:36:56 1015D868 r G02Card [db2com] card initializing error
2015/02/11 18:36:57 0 s init for all local cards done
2015/02/11 18:36:57 10161E88 c plain dvbapi-client granted (anonymous, au=off)
2015/02/11 18:36:57 10161E88 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2015/02/11 18:36:57 10161E88 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1642 PROVID: 000000
2015/02/11 18:36:57 10161E88 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C42 PROVID: 000000
2015/02/11 18:36:57 10161E88 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D42 PROVID: 000000
2015/02/11 18:36:57 10161E88 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1942 PROVID: 000000
2015/02/11 18:36:57 10161E88 c dvbapi: Found 4 ECMpids and 5 STREAMpids in PMT
2015/02/11 18:36:57 10161E88 c dvbapi: New program number: 000A (Sky Cinema) [pmt_list_management 3]
2015/02/11 18:36:57 10161E88 c dvbapi: ERROR: Can't decode channel
2015/02/11 18:36:57 10164A28 c encrypted cccam-client 95.90.206.103 granted (reneh, au=off)

 

[waves]

AW: Dbox2 Oscam AU

Poste mal nen Log vom Oscam Start, wo man sieht ob, und wie die Karte eingelesen wird.
Und nimm erstmal den ins7e11 raus. Den kann man reinmachen, wenn die Karte erstmal im Standart läuft. Sozusagen erst gehen lernen, dann laufen

 

[Rehlein70]

AW: Dbox2 Oscam AU

ins7e11 gelöscht aber ohne erfolg
hier noch mal der neue log

Spoiler

>> OSCam << cardserver started at Wed Feb 11 19:02:14 2015
-------------------------------------------------------------------------------
2015/02/11 19:02:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8414 (powerpc-linux)
2015/02/11 19:02:14 0 s creating pidfile /var/run/oscam.pid with pid 420
2015/02/11 19:02:15 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/02/11 19:02:15 0 s userdb reloaded: 10 accounts loaded, 0 expired, 0 disabled
2015/02/11 19:02:15 0 s signal handling initialized
2015/02/11 19:02:16 0 s 636 service-id's loaded in 587ms
2015/02/11 19:02:16 0 s 3 provid's loaded
2015/02/11 19:02:16 0 s monitor: initialized (fd=6, port=988)
2015/02/11 19:02:16 0 s cccam: initialized (fd=7, port=12002)
2015/02/11 19:02:16 0 s G02Card [mouse] creating thread for device /dev/tts/1
2015/02/11 19:02:16 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/02/11 19:02:16 0 s waiting for local card init
2015/02/11 19:02:16 1015D588 r G02Card [db2com] Reader initialized (device=/dev/tts/1, detect=cd, mhz=357, cardmhz=357)
2015/02/11 19:02:16 1014D788 h dvbapi: HTTP Server listening on port 83
2015/02/11 19:02:17 1015D588 r G02Card [db2com] card detected
2015/02/11 19:02:18 1015D588 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 19:02:18 1015D588 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 19:02:18 1015D588 r G02Card [db2com] Setting baudrate to 153600 bps
2015/02/11 19:02:18 1015D588 r G02Card [db2com] WARNING: your card is asking for custom_baudrate = 153600, but your configuration can only deliver custom_baudrate = -2147483648
2015/02/11 19:02:18 1015D588 r G02Card [db2com] You are over- or underclocking, try OSCam when running your reader at normal clockspeed as required by your card, and setting mhz and cardmhz parameters accordingly.
2015/02/11 19:02:18 1015D588 r G02Card [db2com] You are probably connecting your reader via a serial port, OSCam has more flexibility switching to custom_baudrates when using an USB->serial converter, preferably based on FTDI chip.
2015/02/11 19:02:18 1015D588 r G02Card [db2com] Calculated work ETU is 6.51 us
2015/02/11 19:02:18 1015D588 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 19:02:20 1015D588 r G02Card [db2com] card system not supported
2015/02/11 19:02:20 1015D588 r G02Card [db2com] Normal mode failed, reverting to Deprecated Mode
2015/02/11 19:02:21 1015D588 r G02Card [db2com] ATR: 3F FD 15 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2015/02/11 19:02:21 1015D588 r G02Card [db2com] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/02/11 19:02:21 1015D588 r G02Card [db2com] Calculated work ETU is 104.20 us
2015/02/11 19:02:21 1015D588 r G02Card [db2com] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/02/11 19:02:23 1015D588 r G02Card [db2com] card system not supported
2015/02/11 19:02:23 1015D588 r G02Card [db2com] card initializing error
2015/02/11 19:02:23 0 s init for all local cards done
2015/02/11 19:02:23 10161B20 c plain dvbapi-client granted (anonymous, au=off)
2015/02/11 19:02:23 10161B20 c dvbapi: Detected /dev/dvb/adapter0/demux0 Api: 0
2015/02/11 19:02:24 10163D28 c anonymous disconnected from ##################
2015/02/11 19:02:31 101679C0 c encrypted cccam-client ######## granted (reneh, au=off)
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: Found 4 ECMpids and 5 STREAMpids in PMT
2015/02/11 19:02:38 10161B20 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 19:02:38 10161B20 c dvbapi: ERROR: Can't decode channel
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 19:02:38 10161B20 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 19:02:38 10161B20 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 19:02:38 10161B20 c dvbapi: ERROR: Can't decode channel
2015/02/11 19:02:47 10161B20 c dvbapi: Stopping demux for pmt file /tmp/pmt.tmp
2015/02/11 19:02:47 10161B20 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 19:02:47 10161B20 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 19:02:47 10161B20 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 19:02:47 10161B20 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 19:02:47 10161B20 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 19:02:47 10161B20 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 19:02:47 10161B20 c dvbapi: ERROR: Can't decode channel
2015/02/11 19:02:58 10161B20 c dvbapi: Found 0 ECMpids and 5 STREAMpids in PMT
2015/02/11 19:02:58 10161B20 c dvbapi: New program number: 6D66 (0000:6D66 unknown) [pmt_list_management 3]
2015/02/11 19:03:08 10161B20 c dvbapi: Found 0 ECMpids and 2 STREAMpids in PMT
2015/02/11 19:03:08 10161B20 c dvbapi: New program number: D162 (0000162 unknown) [pmt_list_management 3]
2015/02/11 19:03:18 10161B20 c dvbapi: [ADD PID 0] CAID: 1722 ECM_PID: 1644 PROVID: 000000
2015/02/11 19:03:18 10161B20 c dvbapi: [ADD PID 1] CAID: 1834 ECM_PID: 1C44 PROVID: 000000
2015/02/11 19:03:18 10161B20 c dvbapi: [ADD PID 2] CAID: 09C7 ECM_PID: 1D44 PROVID: 000000
2015/02/11 19:03:18 10161B20 c dvbapi: [ADD PID 3] CAID: 1861 ECM_PID: 1944 PROVID: 000000
2015/02/11 19:03:18 10161B20 c dvbapi: Found 4 ECMpids and 4 STREAMpids in PMT
2015/02/11 19:03:18 10161B20 c dvbapi: New program number: 000B (Sky Cinema +1) [pmt_list_management 3]
2015/02/11 19:03:18 10161B20 c dvbapi: ERROR: Can't decode channel

 

[sammy909]

AW: Dbox2 Oscam AU

Du könntest mal ein bisschen mit MHz , bzw. cardmhz spielen. Versuch mal cardmhz 500.

 

[Rehlein70]

AW: Dbox2 Oscam AU

ok gemacht aber auch ohne erfolg

 

[bombadil]

AW: Dbox2 Oscam AU

Hi,

2015/02/11 18:35:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r8414 (powerpc-linux)

mach da erst mal ein Update.

Grüße
Bombadil

 

[Rehlein70]

AW: Dbox2 Oscam AU

welches oacam wird den empfohlen?