Hey Jung, was mach ich falsch
ich hab:
1 x Fritz 7170
1 x Smargo+
1 x Kati910
Hab ne Kati910 und AAF2e drauf, dort hab ich camd3 aktiv! An meiner Fritzbox 7170 is ein smargo drann, dort ist NewCS aktiv als Server.
hier mein file der camd3.config und im anschluss die newcs.xml
# Wenn Parameter gebraucht wird - '#' (Kommentarzeichen) entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500,
# 5-dm56xx/Triax, 7-elanvision, 9-server only, 10-relook, 11-dm600
# 12-ufs910, 13-dm800
# Default is 9 - server only
BOXTYPE=12
#
# UDP Port(optional); Defailt - 20248
#UDP_PORT=24110
# UDP Host(optional); Defailt - any
#UDP_HOST=192.168.0.1
# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080
# HOST Host(optional); Defailt - any
#HOST_HOST=192.168.0.1
# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=admin
#HTTP_PASSWORD=camd3
# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
#LOG=2
# descrambler delax in ms
#DESCR_DELAY=500
# Host für UDP-logging
#LOG_HOST=192.168.1.1
# Port für UDP-logging(optional); Default ist 514
#LOG_PORT=514
# DNS cache in sekunden; Default ist 60 sec
#DNS_CACHE=60
# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log
# AU für original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
#DBOX2_AU=0
# Kartenslots (anzahl beliebig)
# je eine Zeile für Slot:
# SLOT=devicename:type:au_g:au_s:au_uIMG Removedort:username: password(carddetect):deskey
#
# deskey für normale Slots ist optional, aber port,username und password müssen immer angegeben werden!!!
#
# für die Kartenleser(aber nicht multicam für dbox2) statt password, CTS oder CAR eingeben (carddetect - default - CAR)
#
# devicename: Pfad (volständig) zum Device, oder Hostname von cardserver(newcamd) - /dev/ttyS0...9 für win32-version
# type: 1-serial, 2-intern(dreambox, elanvision, tripledragon), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: port
# username: loginname
# password: loginpassword
# deskey: cardserver deskey (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:com1:CAR
#SLOT=/dev/ttyS0:1:1:1:1:997:com1:CTS
#SLOT=/dev/sci0:2:1:1:1:999:slotuntenIMG Removedassword3
#SLOT=/dev/sci1:2:1:1:1:998:slotobenIMG Removedassword2
#SLOT=localhost:4:1:1:1:22222:dummy:dummy:01020304 05060708091011121314
#SLOT=/dev/cardreader1:2:1:1:1:998:slotobenIMG Removedassword2
#SLOT=192.168.178.1:4:1:1:1ort:newcs:newcs:01020 30405060708091 011121314
#SLOT=192.168.178.1:4:1:1:1:15000:dummy:dummy:0102 0 30405060708091011121314
SLOT=192.168.178.1:4:1:1:1:15000:dummy:dummy:01020 30405060708091011121314
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around IMG Removed)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Phoenix Interface.
-->
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8081</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>newcs</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>
ich hab:
1 x Fritz 7170
1 x Smargo+
1 x Kati910
Hab ne Kati910 und AAF2e drauf, dort hab ich camd3 aktiv! An meiner Fritzbox 7170 is ein smargo drann, dort ist NewCS aktiv als Server.
hier mein file der camd3.config und im anschluss die newcs.xml
# Wenn Parameter gebraucht wird - '#' (Kommentarzeichen) entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500,
# 5-dm56xx/Triax, 7-elanvision, 9-server only, 10-relook, 11-dm600
# 12-ufs910, 13-dm800
# Default is 9 - server only
BOXTYPE=12
#
# UDP Port(optional); Defailt - 20248
#UDP_PORT=24110
# UDP Host(optional); Defailt - any
#UDP_HOST=192.168.0.1
# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080
# HOST Host(optional); Defailt - any
#HOST_HOST=192.168.0.1
# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=admin
#HTTP_PASSWORD=camd3
# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
#LOG=2
# descrambler delax in ms
#DESCR_DELAY=500
# Host für UDP-logging
#LOG_HOST=192.168.1.1
# Port für UDP-logging(optional); Default ist 514
#LOG_PORT=514
# DNS cache in sekunden; Default ist 60 sec
#DNS_CACHE=60
# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log
# AU für original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
#DBOX2_AU=0
# Kartenslots (anzahl beliebig)
# je eine Zeile für Slot:
# SLOT=devicename:type:au_g:au_s:au_uIMG Removedort:username: password(carddetect):deskey
#
# deskey für normale Slots ist optional, aber port,username und password müssen immer angegeben werden!!!
#
# für die Kartenleser(aber nicht multicam für dbox2) statt password, CTS oder CAR eingeben (carddetect - default - CAR)
#
# devicename: Pfad (volständig) zum Device, oder Hostname von cardserver(newcamd) - /dev/ttyS0...9 für win32-version
# type: 1-serial, 2-intern(dreambox, elanvision, tripledragon), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: port
# username: loginname
# password: loginpassword
# deskey: cardserver deskey (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:com1:CAR
#SLOT=/dev/ttyS0:1:1:1:1:997:com1:CTS
#SLOT=/dev/sci0:2:1:1:1:999:slotuntenIMG Removedassword3
#SLOT=/dev/sci1:2:1:1:1:998:slotobenIMG Removedassword2
#SLOT=localhost:4:1:1:1:22222:dummy:dummy:01020304 05060708091011121314
#SLOT=/dev/cardreader1:2:1:1:1:998:slotobenIMG Removedassword2
#SLOT=192.168.178.1:4:1:1:1ort:newcs:newcs:01020 30405060708091 011121314
#SLOT=192.168.178.1:4:1:1:1:15000:dummy:dummy:0102 0 30405060708091011121314
SLOT=192.168.178.1:4:1:1:1:15000:dummy:dummy:01020 30405060708091011121314
<?xml version="1.0"?>
<!--
For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around IMG Removed)
The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.
** This is the example file for Phoenix Interface.
-->
<newCSconfig>
<readers name="Phoenix">
<device>
<name>Phoenix Interface</name>
<type>phoenix</type>
<mhz>357</mhz>
<node>/dev/ttyUSB0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000</ipk>
<ucpk>00000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server>
<port>8081</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>newcs</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>dummy</name>
<password>dummy</password>
<hostname>localhost</hostname>
<port>12000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>
Zuletzt bearbeitet: