AW: Cccam und Scam gleichzeitig nutzen ?
du kannst auch alles einzeln installieren cccam 2.1, mpcs, newcs 1.62
dann eintrag in die cccam.cfg
N: 127.0.0.1 15000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 127.0.0.1 15001 direct dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
mpcs.conf
[global]
Nice = -1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
showecmdw = 1
[monitor]
Port = 0
NoCrypt = 127.0.0.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
HideClient_TO = 1
AULow = 120
MonLevel = 4
[newcamd]
Key = 0102030405060708091011121314
Port = 15000@1834:000000
#Port = 15000@1702:000000;15001@1722:000000;15002@1801:000000;15003@1833:000000;15004@1834:000000
#[cs378x]
#Port = 15001
#[cs357x]
#Port = 15001
mpcs.server
[reader]
Label = newcamd
Protocol = newcamd
Key = 0102030405060708091011121314
Device = 127.0.0.1,15001
Account = mpcs,dummy
Fallback = 1
Group = 1
ReconnectTimeout = 20
DisableServerFilter = 1
mpcs.user
[account]
User = cccam
Pwd = cccam
Group = 1
1801to1702 = 1
CAID = 1834
newcs.xml
<newCSconfig>
<readers name="DreamBox">
<device>
<name>Intern 0</name>
<type>sci</type>
<mhz>600</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockc0>No</blockc0>
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15001</newcamd_port>
<autosid>Off</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<sid>
<allow>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
<device>
<name>Extern USB Smargo 0</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>odd</parity>
<reset>normal</reset>
<node>/dev/usb/tts/0</node>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockc0>No</blockc0>
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15001</newcamd_port>
<autosid>On</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
<sid>
<allow>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<debug>
<password>newcs</password>
<mode>advanced</mode>
<level>notmal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<logfile>./newcs.log</logfile>
<file_options>internal,all</file_options>
<tcp_port>14999</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user><name>dummy</name><status>access</status>
<password>dummy</password>
<hostname></hostname>
<port></port>
<au>off</au>
<spider>off</spider>
<sidoverride>off</sidoverride>
<rate>0</rate>
</user>
<user><status>access</status>
<name>direct</name>
<password>dummy</password>
<au>on</au>
<spider>off</spider>
<sidoverride>off</sidoverride>
<readers>
<allow>Intern 0</allow>
<allow>Extern USB Smargo 0</allow>
</readers>
<rate>0</rate>
</user>
<user><status>access</status>
<name>mpcs</name>
<password>dummy</password>
<au>off</au>
<spider>off</spider>
<sidoverride>off</sidoverride>
<readers>
<allow>Intern 0</allow>
<allow>Extern USB Smargo 0</allow>
</readers>
<rate>0</rate>
</user>
</newcamdserver>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>root</name>
<password>dreambox</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
</newCSconfig>
/usr/script/cccam2_1_0.emu
#!/bin/sh
########################################
###### Powered by NewNigma2 Team ######
###
###
########################################
# EMUNAME is only Display name for EMU Menu
EMUNAME="CCcam2.1.0/Mpcs/NewCs 1.62"
remove_tmp ()
{
[ -e /tmp/ecm.info ] && rm -rf /tmp/ecm.info
[ -e /tmp/pid.info ] && rm -rf /tmp/pid.info
[ -e /tmp/cardinfo ] && rm -rf /tmp/cardinfo
[ -e /tmp/ecm0.info ] && rm -rf /tmp/ecm0.info
[ -e /tmp/CCcam.kill ] && rm -rf /tmp/CCcam.kill
[ -e /tmp/CCcam2_1_0.pid ] && rm -rf /tmp/CCcam2_1_0.pid
[ -e /tmp/newcs.pid ] && rm -rf /tmp/newcs.pid
}
case "$1" in
start)
echo "[SCRIPT] $1: $EMUNAME"
remove_tmp
sleep 2
/usr/bin/newcs_1.62 &
sleep 5
/usr/bin/mpcs &
sleep 5
/usr/bin/CCcam2_1_0 >/dev/null &
pidof CCcam2_1_0 > /tmp/CCcam2_1_0.pid
;;
stop)
echo "[SCRIPT] $1: $EMUNAME"
echo -n "kill " > /tmp/CCcam.kill
pidof CCcam2_1_0 >> /tmp/CCcam.kill
echo -n "kill -9 " >> /tmp/CCcam.kill
pidof CCcam2_1_0 >> /tmp/CCcam.kill
chmod 777 /tmp/CCcam.kill
/tmp/CCcam.kill
sleep 3
killall -9 mpcs newcs_1.62 2>/dev/null
sleep 1
remove_tmp
;;
restart)
$0 stop
sleep 1
$0 start
exit
;;
*)
$1 stop
exit 1
;;
esac
exit 0
dann per telnet /usr/script/CCcam2_1_0.emu start
oder in der Box über Bluepannel Emu Start
unter deineboxip:8080 root/dreambox
kannst du dann auf newcs zugreifen am besten mal die karte von hand reseten.
