hallo.
versuche die karte auf eine dbox2 zu laufen zu bringen ohne erfolg.
hab vieles gelesen und ausprobiert aber es will nicht klappen.
die dbox2 hatt ein glj image drauf und ein multicam der die Mhz für die karte selbst einstellt.
die cccam.cfg sieht so aus:
##Server
N: 127.0.0.1 25030 dbox2 lambros 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: xxxxxxxxx.xxxxxx.org 25035 xxxxxxxxx xxxxxxxxxx no { 0:0:2 }
##Clienten
#
#
SERVER LISTEN PORT : 35000
SHOW EXTENEDED CLIENT INFO : yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : xxxxxxx
WEBINFO PASSWORD : xxxxxxx
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
EXTRA EMM LEVEL : yes
und die newcs.xml so:
-->
- <newCSconfig>
- <readers name="Dbox">
- <device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>
- <!-- <rsa>0000000000</rsa>
-->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
- <radegastserver>
<enabled>No</enabled>
<port>16000</port>
- <allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <debug>
<password>webinterfacepasswd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
- <newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
- <user>
<name>dbox2</name>
<password>lambros</password>
<hostname>127.0.0.1</hostname>
<port>25030</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
wieso bekomm ich die karte nicht an laufen?
danke im voraus
versuche die karte auf eine dbox2 zu laufen zu bringen ohne erfolg.
hab vieles gelesen und ausprobiert aber es will nicht klappen.
die dbox2 hatt ein glj image drauf und ein multicam der die Mhz für die karte selbst einstellt.
die cccam.cfg sieht so aus:
##Server
N: 127.0.0.1 25030 dbox2 lambros 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256
C: xxxxxxxxx.xxxxxx.org 25035 xxxxxxxxx xxxxxxxxxx no { 0:0:2 }
##Clienten
#
#
SERVER LISTEN PORT : 35000
SHOW EXTENEDED CLIENT INFO : yes
ALLOW WEBINFO: yes
WEBINFO USERNAME : xxxxxxx
WEBINFO PASSWORD : xxxxxxx
WEBINFO LISTEN PORT : 16001
ALLOW TELNETINFO: yes
SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
EXTRA EMM LEVEL : yes
und die newcs.xml so:
-->
- <newCSconfig>
- <readers name="Dbox">
- <device>
<name>Multicam</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>00000000</boxkey>
- <!-- <rsa>0000000000</rsa>
-->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ipk>
<ucpk>0000000000000000000000000000000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 00000000000000000000000000000000000000000000000000000000000000000000000000000000 0 000000000000000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>25030</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode>
<priority>round</priority>
</device>
</readers>
- <radegastserver>
<enabled>No</enabled>
<port>16000</port>
- <allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
- <cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
- <debug>
<password>webinterfacepasswd</password>
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
- <newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
- <user>
<name>dbox2</name>
<password>lambros</password>
<hostname>127.0.0.1</hostname>
<port>25030</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>2</rate>
</user>
wieso bekomm ich die karte nicht an laufen?
danke im voraus